# Makefile.in generated by automake 1.16.5 from Makefile.am. # tests/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/osmo-msc pkgincludedir = $(includedir)/osmo-msc pkglibdir = $(libdir)/osmo-msc pkglibexecdir = $(libexecdir)/osmo-msc am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu am__append_1 = \ smpp \ $(NULL) subdir = tests ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = atlocal CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir distdir-am am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` DIST_SUBDIRS = sms_queue msc_vlr db_sms sdp_msg mncc csd smpp am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/atlocal.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = ${SHELL} '/build/osmo-msc/missing' aclocal-1.16 AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = ar AUTOCONF = ${SHELL} '/build/osmo-msc/missing' autoconf AUTOHEADER = ${SHELL} '/build/osmo-msc/missing' autoheader AUTOMAKE = ${SHELL} '/build/osmo-msc/missing' automake-1.16 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -std=gnu11 -fsanitize=address -fsanitize=undefined COVERAGE_CFLAGS = COVERAGE_LDFLAGS = CPPFLAGS = -fsanitize=address -fsanitize=undefined CSCOPE = cscope CTAGS = ctags CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E ETAGS = etags EXEEXT = FGREP = /usr/bin/grep -F FILECMD = file GREP = /usr/bin/grep HAVE_LIBSCTP = 1 INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/bin/ld -m elf_x86_64 LDFLAGS = LIBASN1C_CFLAGS = -I/build/inst-osmo-msc/include/ -I/build/inst-osmo-msc/include/asn1c LIBASN1C_LIBS = -L/build/inst-osmo-msc/lib -ltalloc -lasn1c LIBOBJS = LIBOSMOABIS_CFLAGS = -I/build/inst-osmo-msc/include/ -pthread LIBOSMOABIS_LIBS = -L/build/inst-osmo-msc/lib -losmoabis -losmocore -ltalloc -lmnl LIBOSMOCORE_CFLAGS = -I/build/inst-osmo-msc/include/ -pthread LIBOSMOCORE_LIBS = -L/build/inst-osmo-msc/lib -losmocore -ltalloc -lmnl LIBOSMOCTRL_CFLAGS = -I/build/inst-osmo-msc/include/ -pthread LIBOSMOCTRL_LIBS = -L/build/inst-osmo-msc/lib -losmoctrl -losmogsm -losmoisdn -losmocore -ltalloc -lmnl LIBOSMOGSM_CFLAGS = -I/build/inst-osmo-msc/include/ -pthread LIBOSMOGSM_LIBS = -L/build/inst-osmo-msc/lib -losmogsm -losmoisdn -losmocore -ltalloc -lmnl LIBOSMOGSUPCLIENT_CFLAGS = -I/build/inst-osmo-msc/include/ LIBOSMOGSUPCLIENT_LIBS = -L/build/inst-osmo-msc/lib -losmo-gsup-client LIBOSMOMGCPCLIENT_CFLAGS = -I/build/inst-osmo-msc/include/ LIBOSMOMGCPCLIENT_LIBS = -L/build/inst-osmo-msc/lib -losmo-mgcp-client LIBOSMONETIF_CFLAGS = -I/build/inst-osmo-msc/include/ LIBOSMONETIF_LIBS = -L/build/inst-osmo-msc/lib -losmonetif LIBOSMORANAP_CFLAGS = -I/build/inst-osmo-msc/include/ LIBOSMORANAP_LIBS = -L/build/inst-osmo-msc/lib -losmo-ranap LIBOSMOSIGTRAN_CFLAGS = -I/build/inst-osmo-msc/include/ LIBOSMOSIGTRAN_LIBS = -L/build/inst-osmo-msc/lib -losmo-sigtran LIBOSMOVTY_CFLAGS = -I/build/inst-osmo-msc/include/ -pthread LIBOSMOVTY_LIBS = -L/build/inst-osmo-msc/lib -losmovty -losmocore -ltalloc -lmnl LIBS = LIBSCTP_LIBS = -lsctp LIBSMPP34_CFLAGS = -I/build/inst-osmo-msc/include/ LIBSMPP34_LIBS = -L/build/inst-osmo-msc/lib -lsmpp34 LIBSQLITE3_CFLAGS = LIBSQLITE3_LIBS = -lsqlite3 LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAKEINFO = ${SHELL} '/build/osmo-msc/missing' makeinfo MANIFEST_TOOL = : MKDIR_P = /usr/bin/mkdir -p NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OSMOTESTEXT_CHECK = OSMO_GSM_MANUALS_DIR = OTOOL = OTOOL64 = PACKAGE = osmo-msc PACKAGE_BUGREPORT = openbsc@lists.osmocom.org PACKAGE_NAME = osmo-msc PACKAGE_STRING = osmo-msc 1.12.1.19-408d2 PACKAGE_TARNAME = osmo-msc PACKAGE_URL = PACKAGE_VERSION = 1.12.1.19-408d2 PATH_SEPARATOR = : PKG_CONFIG = /usr/bin/pkg-config PKG_CONFIG_INSTALLED = /usr/bin/pkg-config PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = /build/inst-osmo-msc/lib/pkgconfig: PYTHON = PYTHON_EXEC_PREFIX = PYTHON_PLATFORM = PYTHON_PREFIX = PYTHON_VERSION = RANLIB = ranlib RELMAKE = -include osmo-release.mk SED = /usr/bin/sed SET_MAKE = SHELL = /bin/bash STRIP = strip VERSION = 1.12.1.19-408d2 abs_builddir = /build/osmo-msc/tests abs_srcdir = /build/osmo-msc/tests abs_top_builddir = /build/osmo-msc abs_top_srcdir = /build/osmo-msc ac_ct_AR = ar ac_ct_CC = gcc ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = x86_64-pc-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-pc-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /build/osmo-msc/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include osmo_ac_build_smpp = yes osmo_ac_iu = yes pdfdir = ${docdir} pkgpyexecdir = pkgpythondir = prefix = /build/inst-osmo-msc program_transform_name = s,x,x, psdir = ${docdir} pyexecdir = pythondir = runstatedir = ${localstatedir}/run sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc systemdsystemunitdir = target_alias = top_build_prefix = ../ top_builddir = .. top_srcdir = .. SUBDIRS = sms_queue msc_vlr db_sms sdp_msg mncc csd $(NULL) \ $(am__append_1) EXTRA_DIST = \ testsuite.at \ $(srcdir)/package.m4 \ $(TESTSUITE) \ vty_test_runner.py \ ctrl_test_runner.py \ smpp_test_runner.py \ $(srcdir)/*.vty \ $(NULL) TESTSUITE = $(srcdir)/testsuite DISTCLEANFILES = \ atconfig \ $(NULL) AUTOM4TE = $(SHELL) $(top_srcdir)/missing --run autom4te AUTOTEST = $(AUTOM4TE) --language=autotest all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu tests/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): atlocal: $(top_builddir)/config.status $(srcdir)/atlocal.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: installcheck-local maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) check-am install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am check-local clean clean-generic clean-libtool \ clean-local cscopelist-am ctags ctags-am distclean \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installcheck-local installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am .PRECIOUS: Makefile # The `:;' works around a Bash 3.2 bug when the output is not writeable. $(srcdir)/package.m4: $(top_srcdir)/configure.ac :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [$(PACKAGE_NAME)])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [$(PACKAGE_TARNAME)])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [$(PACKAGE_VERSION)])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [$(PACKAGE_STRING)])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [$(PACKAGE_BUGREPORT)])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [$(PACKAGE_URL)])'; \ } >'$(srcdir)/package.m4' # don't run multiple tests concurrently so that the ports don't conflict #python-tests: # $(MAKE) vty-test # $(MAKE) ctrl-test # $(MAKE) smpp-test python-tests: echo "Not running python-based tests (determined at configure-time)" vty-python-test: $(top_builddir)/src/osmo-msc/osmo-msc IU=1 osmotestvty.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v IU=1 osmotestconfig.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v # IU=0 osmotestvty.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v # IU=0 osmotestconfig.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v $(srcdir)/vty_test_runner.py -w $(abs_top_builddir) -v rm -f $(top_builddir)/sms.db* # Run a specific transcript test with: 'make vty-transcript-test VTY_TEST=osmo-msc.vty' VTY_TEST ?= *.vty # To update the VTY script from current application behavior, # pass -u to vty_script_runner.py by doing: # make vty-transcript-test U=-u vty-transcript-test: $(top_builddir)/src/osmo-msc/osmo-msc osmo_verify_transcript_vty.py -v \ -n OsmoMSC -p 4254 \ -r "$(top_builddir)/src/osmo-msc/osmo-msc -c $(top_srcdir)/doc/examples/osmo-msc/osmo-msc.cfg" \ $(U) $(srcdir)/$(VTY_TEST) rm -f $(builddir)/sms.db* # don't run multiple tests concurrently so that the ports don't conflict vty-test: $(MAKE) vty-python-test $(MAKE) vty-transcript-test ctrl-python-test: $(top_builddir)/src/osmo-msc/osmo-msc $(srcdir)/ctrl_test_runner.py -w $(abs_top_builddir) -v rm -f $(top_builddir)/sms.db* # To update the CTRL script from current application behavior, # pass -u to ctrl_script_runner.py by doing: # make ctrl-transcript-test U=-u ctrl-transcript-test: echo "No ctrl-transcript-test exists yet" # don't run multiple tests concurrently so that the ports don't conflict ctrl-test: $(MAKE) ctrl-python-test $(MAKE) ctrl-transcript-test smpp-test:$(top_builddir)/src/osmo-msc/osmo-msc $(srcdir)/smpp_test_runner.py -w $(abs_top_builddir) -v rm -f $(top_builddir)/sms.db* check-local: atconfig $(TESTSUITE) $(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS) $(MAKE) $(AM_MAKEFLAGS) python-tests installcheck-local: atconfig $(TESTSUITE) $(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' \ $(TESTSUITEFLAGS) clean-local: test ! -f '$(TESTSUITE)' || \ $(SHELL) '$(TESTSUITE)' --clean $(TESTSUITE): $(srcdir)/testsuite.at $(srcdir)/package.m4 $(AUTOTEST) -I '$(srcdir)' -o $@.tmp $@.at mv $@.tmp $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: