Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=15428): Process ended prematurely: osmo-stp_10.42.42.5(pid=15428) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15428)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 21:17:21.317470 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.330033 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:17:21.474652 tst iperf3.py: using LAC 16868 21:17:21.600083 tst iperf3.py: using RAC 38 21:17:21.725078 tst iperf3.py: using CellId 16868 21:17:21.853434 tst iperf3.py: using BVCI 16869 21:17:21.877950 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.890088 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.901672 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.913293 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.924891 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.936541 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.948341 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.959833 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.971644 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:22.246591 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:17:22.369942 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:22.676754 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15420): Launched 21:17:22.932490 run iperf3-srv_10.42.42.10(pid=15421): Launched 21:17:23.113237 tst iperf3.py:8: start network... 21:17:23.236258 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:23.714851 run create_hlr_db(pid=15422): Launched 21:17:23.886419 bus /gobi_6: Setting Powered False 21:17:24.907252 run create_hlr_db(pid=15422): Terminated: ok {rc=0} 21:17:25.331697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15424): Launched 21:17:25.651321 run osmo-hlr_10.42.42.2(pid=15425): Launched 21:17:25.771146 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:26.325638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15427): Launched 21:17:26.644466 run osmo-stp_10.42.42.5(pid=15428): Launched 21:17:26.760169 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:27.316772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15430): Launched 21:17:27.430679 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:27.710132 run patchelf(pid=15431): Launched 21:17:27.896882 run osmo-stp_10.42.42.5(pid=15428): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15428)] 21:17:28.033982 run osmo-stp_10.42.42.5(pid=15428): stdout: | (launched: 2022-12-08_21:17:26.487703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:28.170947 run osmo-stp_10.42.42.5(pid=15428): stderr: | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211726680 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:28.303241 run osmo-stp_10.42.42.5(pid=15428): stdout: | (launched: 2022-12-08_21:17:26.487703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:28.434577 run osmo-stp_10.42.42.5(pid=15428): stderr: | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211726680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211726680 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211726683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:28.587445 run patchelf(pid=15431): Terminating (SIGINT) 21:17:28.766648 run patchelf(pid=15431): Terminated: ok {rc=0} 21:17:28.799685 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15428): Process ended prematurely: osmo-stp_10.42.42.5(pid=15428) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15428)] [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 21:17:28.809724 tst iperf3.py:8: Test FAILED (7.5 sec) 21:17:28.871827 run osmo-hlr_10.42.42.2(pid=15425): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15425)] 21:17:28.922873 run osmo-hlr_10.42.42.2(pid=15425): stdout: | (launched: 2022-12-08_21:17:25.493979) 21:17:28.974561 run osmo-hlr_10.42.42.2(pid=15425): stderr: | �[0;m�[1;31m20221208211725691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208211725691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208211725692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208211725692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208211725692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208211725692 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208211725704 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208211725712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208211725713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208211725713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:17:29.018636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15420): Terminating (SIGTERM) 21:17:29.060238 run iperf3-srv_10.42.42.10(pid=15421): Terminating (SIGTERM) 21:17:29.101695 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15424): Terminating (SIGTERM) 21:17:29.142916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15427): Terminating (SIGTERM) 21:17:29.184417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15430): Terminating (SIGTERM) 21:17:29.193655 --- ParallelTerminationStrategy: PID 15420 died... 21:17:29.248689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15420): Terminated: ok {rc=0} 21:17:29.258673 --- ParallelTerminationStrategy: PID 15421 died... 21:17:29.313347 run iperf3-srv_10.42.42.10(pid=15421): Terminated {rc=256} 21:17:29.323322 --- ParallelTerminationStrategy: PID 15424 died... 21:17:29.378784 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15424): Terminated: ok {rc=0} 21:17:29.388573 --- ParallelTerminationStrategy: PID 15427 died... 21:17:29.443713 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15427): Terminated: ok {rc=0} 21:17:29.453718 --- ParallelTerminationStrategy: PID 15430 died... 21:17:29.508469 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15430): Terminated: ok {rc=0} 21:17:29.594850 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15428): Process ended prematurely: osmo-stp_10.42.42.5(pid=15428) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15428)]