Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=15449): Process ended prematurely: osmo-stp_10.42.42.5(pid=15449) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15449)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 21:17:30.711468 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:30.724097 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:17:30.881201 tst iperf3m4.py: using LAC 16869 21:17:31.019870 tst iperf3m4.py: using RAC 39 21:17:31.200711 tst iperf3m4.py: using CellId 16869 21:17:31.336619 tst iperf3m4.py: using BVCI 16870 21:17:31.363026 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.375501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.387822 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.400199 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.412505 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.424849 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.437443 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.449684 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:31.462464 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:31.584434 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:31.739138 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:31.879466 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:32.202842 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 21:17:32.342668 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:32.653491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Launched 21:17:32.911512 run iperf3-srv_10.42.42.10(pid=15433): Launched 21:17:33.094559 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 21:17:33.219088 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:33.528124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15434): Launched 21:17:33.786278 run iperf3-srv_10.42.42.10(pid=15435): Launched 21:17:33.968779 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 21:17:34.093832 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:34.403766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15436): Launched 21:17:34.661404 run iperf3-srv_10.42.42.10(pid=15437): Launched 21:17:34.843116 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 21:17:34.966896 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:35.275237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15438): Launched 21:17:35.531840 run iperf3-srv_10.42.42.10(pid=15439): Launched 21:17:35.714239 tst iperf3m4.py:8: start network... 21:17:35.852186 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:36.363597 run create_hlr_db(pid=15443): Launched 21:17:36.548256 bus /gobi_6: Setting Powered False 21:17:37.569432 run create_hlr_db(pid=15443): Terminated: ok {rc=0} 21:17:37.995336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15445): Launched 21:17:38.314021 run osmo-hlr_10.42.42.2(pid=15446): Launched 21:17:38.429484 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:38.984820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15448): Launched 21:17:39.306340 run osmo-stp_10.42.42.5(pid=15449): Launched 21:17:39.422901 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:39.982590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15451): Launched 21:17:40.097492 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:40.377587 run patchelf(pid=15452): Launched 21:17:40.565285 run osmo-stp_10.42.42.5(pid=15449): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15449)] 21:17:40.702080 run osmo-stp_10.42.42.5(pid=15449): stdout: | (launched: 2022-12-08_21:17:39.148579) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:40.839122 run osmo-stp_10.42.42.5(pid=15449): stderr: | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211739340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:40.971411 run osmo-stp_10.42.42.5(pid=15449): stdout: | (launched: 2022-12-08_21:17:39.148579) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:41.103354 run osmo-stp_10.42.42.5(pid=15449): stderr: | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211739339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211739340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211739340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:41.256492 run patchelf(pid=15452): Terminating (SIGINT) 21:17:41.436203 run patchelf(pid=15452): Terminated: ok {rc=0} 21:17:41.469239 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15449): Process ended prematurely: osmo-stp_10.42.42.5(pid=15449) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15449)] [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 21:17:41.479003 tst iperf3m4.py:8: Test FAILED (10.8 sec) 21:17:41.541810 run osmo-hlr_10.42.42.2(pid=15446): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15446)] 21:17:41.593001 run osmo-hlr_10.42.42.2(pid=15446): stdout: | (launched: 2022-12-08_21:17:38.158300) 21:17:41.644750 run osmo-hlr_10.42.42.2(pid=15446): stderr: | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208211738359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208211738377 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208211738387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208211738387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208211738387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:17:41.688837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Terminating (SIGTERM) 21:17:41.730477 run iperf3-srv_10.42.42.10(pid=15433): Terminating (SIGTERM) 21:17:41.772323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15434): Terminating (SIGTERM) 21:17:41.814215 run iperf3-srv_10.42.42.10(pid=15435): Terminating (SIGTERM) 21:17:41.855798 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15436): Terminating (SIGTERM) 21:17:41.897416 run iperf3-srv_10.42.42.10(pid=15437): Terminating (SIGTERM) 21:17:41.939011 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15438): Terminating (SIGTERM) 21:17:41.980333 run iperf3-srv_10.42.42.10(pid=15439): Terminating (SIGTERM) 21:17:42.021821 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15445): Terminating (SIGTERM) 21:17:42.063635 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15448): Terminating (SIGTERM) 21:17:42.105510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15451): Terminating (SIGTERM) 21:17:42.115116 --- ParallelTerminationStrategy: PID 15432 died... 21:17:42.170470 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Terminated: ok {rc=0} 21:17:42.180315 --- ParallelTerminationStrategy: PID 15433 died... 21:17:42.235511 run iperf3-srv_10.42.42.10(pid=15433): Terminated {rc=256} 21:17:42.245447 --- ParallelTerminationStrategy: PID 15434 died... 21:17:42.300469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15434): Terminated: ok {rc=0} 21:17:42.310374 --- ParallelTerminationStrategy: PID 15435 died... 21:17:42.365652 run iperf3-srv_10.42.42.10(pid=15435): Terminated {rc=256} 21:17:42.375576 --- ParallelTerminationStrategy: PID 15436 died... 21:17:42.430647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15436): Terminated: ok {rc=0} 21:17:42.440471 --- ParallelTerminationStrategy: PID 15437 died... 21:17:42.495483 run iperf3-srv_10.42.42.10(pid=15437): Terminated {rc=256} 21:17:42.505391 --- ParallelTerminationStrategy: PID 15438 died... 21:17:42.560731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15438): Terminated: ok {rc=0} 21:17:42.570702 --- ParallelTerminationStrategy: PID 15439 died... 21:17:42.625738 run iperf3-srv_10.42.42.10(pid=15439): Terminated {rc=256} 21:17:42.635605 --- ParallelTerminationStrategy: PID 15445 died... 21:17:42.691185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15445): Terminated: ok {rc=0} 21:17:42.701239 --- ParallelTerminationStrategy: PID 15448 died... 21:17:42.756381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15448): Terminated: ok {rc=0} 21:17:42.766352 --- ParallelTerminationStrategy: PID 15451 died... 21:17:42.821645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15451): Terminated: ok {rc=0} 21:17:42.909084 bus /gobi_4: Setting Powered False 21:17:44.015946 bus /gobi_4: Setting Powered False 21:17:45.124431 bus /gobi_1: Setting Powered False 21:17:46.233178 bus /gobi_1: Setting Powered False 21:17:47.342092 bus /gobi_0: Setting Powered False 21:17:48.444295 bus /gobi_0: Setting Powered False 21:17:49.550728 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15449): Process ended prematurely: osmo-stp_10.42.42.5(pid=15449) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15449)]