Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10213): Process ended prematurely: osmo-stp_10.42.42.5(pid=10213) [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10213)]
Standard Output
---------------------------------------------- trial-2349 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:19:18.974917 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:18.985664 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:19:19.108421 tst cs_paging_gprs_active.py: using LAC 16560 20:19:19.227163 tst cs_paging_gprs_active.py: using RAC 240 20:19:19.344768 tst cs_paging_gprs_active.py: using CellId 16560 20:19:19.463626 tst cs_paging_gprs_active.py: using BVCI 16561 20:19:19.486332 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.497512 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.508240 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.521301 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.532857 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.543879 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.555219 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.566368 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:19:19.577623 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:19:19.693682 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:19:19.969581 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:19:20.096018 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:19:20.405411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10203): Launched 20:19:20.662931 run iperf3-srv_10.42.42.10(pid=10204): Launched 20:19:20.844847 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:19:20.969235 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:19:21.277816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10205): Launched 20:19:21.534018 run iperf3-srv_10.42.42.10(pid=10206): Launched 20:19:21.714900 tst cs_paging_gprs_active.py:38: start network... 20:19:21.838500 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:19:22.309282 run create_hlr_db(pid=10207): Launched 20:19:22.481232 bus /gobi_6: Setting Powered False 20:19:23.502436 run create_hlr_db(pid=10207): Terminated: ok {rc=0} 20:19:23.928864 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10209): Launched 20:19:24.249220 run osmo-hlr_10.42.42.2(pid=10210): Launched 20:19:24.367792 run osmo-stp_10.42.42.5: Starting osmo-stp 20:19:24.925905 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10212): Launched 20:19:25.244541 run osmo-stp_10.42.42.5(pid=10213): Launched 20:19:25.360903 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:19:25.917382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10215): Launched 20:19:26.032358 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:19:26.311115 run patchelf(pid=10216): Launched 20:19:26.498548 run osmo-stp_10.42.42.5(pid=10213): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10213)] 20:19:26.635232 run osmo-stp_10.42.42.5(pid=10213): stdout: | (launched: 2022-12-08_20:19:25.088083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:19:26.772525 run osmo-stp_10.42.42.5(pid=10213): stderr: | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208201925276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:19:26.905226 run osmo-stp_10.42.42.5(pid=10213): stdout: | (launched: 2022-12-08_20:19:25.088083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:19:27.036524 run osmo-stp_10.42.42.5(pid=10213): stderr: | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208201925276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208201925276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208201925277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:19:27.189210 run patchelf(pid=10216): Terminating (SIGINT) 20:19:27.368890 run patchelf(pid=10216): Terminated: ok {rc=0} 20:19:27.401790 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10213): Process ended prematurely: osmo-stp_10.42.42.5(pid=10213) [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10213)] [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:19:27.411720 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:19:27.473997 run osmo-hlr_10.42.42.2(pid=10210): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10210)] 20:19:27.525374 run osmo-hlr_10.42.42.2(pid=10210): stdout: | (launched: 2022-12-08_20:19:24.092043) 20:19:27.577233 run osmo-hlr_10.42.42.2(pid=10210): stderr: | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208201924286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208201924299 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208201924308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208201924308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208201924308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:19:27.621718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10203): Terminating (SIGTERM) 20:19:27.663491 run iperf3-srv_10.42.42.10(pid=10204): Terminating (SIGTERM) 20:19:27.705489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10205): Terminating (SIGTERM) 20:19:27.747317 run iperf3-srv_10.42.42.10(pid=10206): Terminating (SIGTERM) 20:19:27.789290 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10209): Terminating (SIGTERM) 20:19:27.831010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10212): Terminating (SIGTERM) 20:19:27.872838 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10215): Terminating (SIGTERM) 20:19:27.882497 --- ParallelTerminationStrategy: PID 10203 died... 20:19:27.937955 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10203): Terminated: ok {rc=0} 20:19:27.947936 --- ParallelTerminationStrategy: PID 10204 died... 20:19:28.003307 run iperf3-srv_10.42.42.10(pid=10204): Terminated {rc=256} 20:19:28.013240 --- ParallelTerminationStrategy: PID 10205 died... 20:19:28.068684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10205): Terminated: ok {rc=0} 20:19:28.078611 --- ParallelTerminationStrategy: PID 10206 died... 20:19:28.133895 run iperf3-srv_10.42.42.10(pid=10206): Terminated {rc=256} 20:19:28.143843 --- ParallelTerminationStrategy: PID 10209 died... 20:19:28.199080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10209): Terminated: ok {rc=0} 20:19:28.209149 --- ParallelTerminationStrategy: PID 10212 died... 20:19:28.264509 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10212): Terminated: ok {rc=0} 20:19:28.274550 --- ParallelTerminationStrategy: PID 10215 died... 20:19:28.330375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10215): Terminated: ok {rc=0} 20:19:28.417291 bus /gobi_0: Setting Powered False 20:19:29.520319 bus /gobi_0: Setting Powered False 20:19:30.628191 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10213): Process ended prematurely: osmo-stp_10.42.42.5(pid=10213) [trial-2349↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10213)]