Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13542): Process ended prematurely: osmo-stp_10.42.42.5(pid=13542) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13542)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:54:53.697837 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:53.708684 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:54:53.862874 tst cs_paging_gprs_active.py: using LAC 16749 20:54:53.978961 tst cs_paging_gprs_active.py: using RAC 174 20:54:54.100536 tst cs_paging_gprs_active.py: using CellId 16749 20:54:54.219107 tst cs_paging_gprs_active.py: using BVCI 16750 20:54:54.242195 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.252921 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.263680 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.274715 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.285498 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.296373 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.307371 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.318355 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:54:54.329409 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:54:54.449423 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:54:54.728899 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:54:54.854550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:55.168638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13532): Launched 20:54:55.428829 run iperf3-srv_10.42.42.10(pid=13533): Launched 20:54:55.613016 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:54:55.738509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:56.051674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Launched 20:54:56.311340 run iperf3-srv_10.42.42.10(pid=13535): Launched 20:54:56.494934 tst cs_paging_gprs_active.py:38: start network... 20:54:56.620080 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:54:57.113700 run create_hlr_db(pid=13536): Launched 20:54:57.300629 bus /gobi_6: Setting Powered False 20:54:58.322695 run create_hlr_db(pid=13536): Terminated: ok {rc=0} 20:54:58.728443 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13538): Launched 20:54:59.031154 run osmo-hlr_10.42.42.2(pid=13539): Launched 20:54:59.149724 run osmo-stp_10.42.42.5: Starting osmo-stp 20:54:59.686388 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13541): Launched 20:55:00.010383 run osmo-stp_10.42.42.5(pid=13542): Launched 20:55:00.127138 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:55:00.692785 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13544): Launched 20:55:00.808502 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:55:01.122825 run patchelf(pid=13545): Launched 20:55:01.316079 run osmo-stp_10.42.42.5(pid=13542): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13542)] 20:55:01.457919 run osmo-stp_10.42.42.5(pid=13542): stdout: | (launched: 2022-12-08_20:54:59.850806) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:55:01.599495 run osmo-stp_10.42.42.5(pid=13542): stderr: | �[0;m�[38;5;43m20221208205500043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205500044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205500044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205500044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:55:01.758324 run osmo-stp_10.42.42.5(pid=13542): stdout: | (launched: 2022-12-08_20:54:59.850806) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:55:01.919845 run osmo-stp_10.42.42.5(pid=13542): stderr: | �[0;m�[38;5;43m20221208205500043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205500044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205500044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205500044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205500045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:55:02.079958 run patchelf(pid=13545): Terminating (SIGINT) 20:55:02.264337 run patchelf(pid=13545): Terminated: ok {rc=0} 20:55:02.298080 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13542): Process ended prematurely: osmo-stp_10.42.42.5(pid=13542) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13542)] [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:55:02.307915 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:55:02.371587 run osmo-hlr_10.42.42.2(pid=13539): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13539)] 20:55:02.423134 run osmo-hlr_10.42.42.2(pid=13539): stdout: | (launched: 2022-12-08_20:54:58.881522) 20:55:02.474809 run osmo-hlr_10.42.42.2(pid=13539): stderr: | �[0;m�[1;31m20221208205459059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208205459059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208205459059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208205459059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208205459060 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208205459060 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208205459072 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208205459082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208205459082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208205459082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:55:02.519007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13532): Terminating (SIGTERM) 20:55:02.560827 run iperf3-srv_10.42.42.10(pid=13533): Terminating (SIGTERM) 20:55:02.602679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Terminating (SIGTERM) 20:55:02.644217 run iperf3-srv_10.42.42.10(pid=13535): Terminating (SIGTERM) 20:55:02.686052 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13538): Terminating (SIGTERM) 20:55:02.727630 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13541): Terminating (SIGTERM) 20:55:02.769361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13544): Terminating (SIGTERM) 20:55:02.779096 --- ParallelTerminationStrategy: PID 13532 died... 20:55:02.834829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13532): Terminated: ok {rc=0} 20:55:02.844799 --- ParallelTerminationStrategy: PID 13533 died... 20:55:02.900103 run iperf3-srv_10.42.42.10(pid=13533): Terminated {rc=256} 20:55:02.910148 --- ParallelTerminationStrategy: PID 13534 died... 20:55:02.965684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Terminated: ok {rc=0} 20:55:02.975772 --- ParallelTerminationStrategy: PID 13535 died... 20:55:03.032176 run iperf3-srv_10.42.42.10(pid=13535): Terminated {rc=256} 20:55:03.042383 --- ParallelTerminationStrategy: PID 13538 died... 20:55:03.098043 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13538): Terminated: ok {rc=0} 20:55:03.108288 --- ParallelTerminationStrategy: PID 13541 died... 20:55:03.163828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13541): Terminated: ok {rc=0} 20:55:03.174065 --- ParallelTerminationStrategy: PID 13544 died... 20:55:03.229778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13544): Terminated: ok {rc=0} 20:55:03.316838 bus /gobi_0: Setting Powered False 20:55:04.419545 bus /gobi_0: Setting Powered False 20:55:05.530396 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13542): Process ended prematurely: osmo-stp_10.42.42.5(pid=13542) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13542)]