Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13613): Process ended prematurely: osmo-stp_10.42.42.5(pid=13613) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13613)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:55:53.444372 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:53.455924 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:55:53.619346 tst cs_paging_gprs_active.py: using LAC 16754 20:55:53.741276 tst cs_paging_gprs_active.py: using RAC 179 20:55:53.861623 tst cs_paging_gprs_active.py: using CellId 16754 20:55:53.988761 tst cs_paging_gprs_active.py: using BVCI 16755 20:55:54.013999 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.025740 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.037122 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.048692 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.060615 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.072380 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.083864 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.095442 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:55:54.106998 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:55:54.226425 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:55:54.513359 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:55:54.639618 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:55:54.953194 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13603): Launched 20:55:55.214244 run iperf3-srv_10.42.42.10(pid=13604): Launched 20:55:55.398565 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:55:55.525425 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:55:55.839330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13605): Launched 20:55:56.099522 run iperf3-srv_10.42.42.10(pid=13606): Launched 20:55:56.283562 tst cs_paging_gprs_active.py:38: start network... 20:55:56.409420 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:55:56.887018 run create_hlr_db(pid=13607): Launched 20:55:57.060501 bus /gobi_6: Setting Powered False 20:55:58.082587 run create_hlr_db(pid=13607): Terminated: ok {rc=0} 20:55:58.514715 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13609): Launched 20:55:58.839797 run osmo-hlr_10.42.42.2(pid=13610): Launched 20:55:58.959825 run osmo-stp_10.42.42.5: Starting osmo-stp 20:55:59.525891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13612): Launched 20:55:59.850477 run osmo-stp_10.42.42.5(pid=13613): Launched 20:55:59.967551 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:56:00.535819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13615): Launched 20:56:00.652352 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:56:00.982662 run patchelf(pid=13616): Launched 20:56:01.180251 run osmo-stp_10.42.42.5(pid=13613): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13613)] 20:56:01.322706 run osmo-stp_10.42.42.5(pid=13613): stdout: | (launched: 2022-12-08_20:55:59.691230) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:01.466034 run osmo-stp_10.42.42.5(pid=13613): stderr: | �[0;m�[38;5;43m20221208205559884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205559884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205559885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205559885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:01.605213 run osmo-stp_10.42.42.5(pid=13613): stdout: | (launched: 2022-12-08_20:55:59.691230) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:01.742131 run osmo-stp_10.42.42.5(pid=13613): stderr: | �[0;m�[38;5;43m20221208205559884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205559884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205559885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205559885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205559886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:01.901548 run patchelf(pid=13616): Terminating (SIGINT) 20:56:02.088087 run patchelf(pid=13616): Terminated: ok {rc=0} 20:56:02.122625 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13613): Process ended prematurely: osmo-stp_10.42.42.5(pid=13613) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13613)] [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:56:02.133264 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:56:02.197160 run osmo-hlr_10.42.42.2(pid=13610): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13610)] 20:56:02.248807 run osmo-hlr_10.42.42.2(pid=13610): stdout: | (launched: 2022-12-08_20:55:58.680227) 20:56:02.300833 run osmo-hlr_10.42.42.2(pid=13610): stderr: | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208205558880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208205558892 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208205558900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208205558900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208205558901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:56:02.345359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13603): Terminating (SIGTERM) 20:56:02.387215 run iperf3-srv_10.42.42.10(pid=13604): Terminating (SIGTERM) 20:56:02.429530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13605): Terminating (SIGTERM) 20:56:02.471479 run iperf3-srv_10.42.42.10(pid=13606): Terminating (SIGTERM) 20:56:02.513402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13609): Terminating (SIGTERM) 20:56:02.555273 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13612): Terminating (SIGTERM) 20:56:02.597175 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13615): Terminating (SIGTERM) 20:56:02.606936 --- ParallelTerminationStrategy: PID 13603 died... 20:56:02.662956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13603): Terminated: ok {rc=0} 20:56:02.673307 --- ParallelTerminationStrategy: PID 13604 died... 20:56:02.728557 run iperf3-srv_10.42.42.10(pid=13604): Terminated {rc=256} 20:56:02.738769 --- ParallelTerminationStrategy: PID 13605 died... 20:56:02.794355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13605): Terminated: ok {rc=0} 20:56:02.804607 --- ParallelTerminationStrategy: PID 13606 died... 20:56:02.860237 run iperf3-srv_10.42.42.10(pid=13606): Terminated {rc=256} 20:56:02.870442 --- ParallelTerminationStrategy: PID 13609 died... 20:56:02.925873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13609): Terminated: ok {rc=0} 20:56:02.936176 --- ParallelTerminationStrategy: PID 13612 died... 20:56:02.991685 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13612): Terminated: ok {rc=0} 20:56:03.001931 --- ParallelTerminationStrategy: PID 13615 died... 20:56:03.057794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13615): Terminated: ok {rc=0} 20:56:03.145270 bus /gobi_0: Setting Powered False 20:56:04.248311 bus /gobi_0: Setting Powered False 20:56:05.359555 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13613): Process ended prematurely: osmo-stp_10.42.42.5(pid=13613) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13613)]