Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12724): Process ended prematurely: osmo-stp_10.42.42.5(pid=12724) [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12724)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:47:05.571796 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:05.583245 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:47:05.745969 tst cs_paging_gprs_active.py: using LAC 16707 20:47:05.871548 tst cs_paging_gprs_active.py: using RAC 132 20:47:05.996392 tst cs_paging_gprs_active.py: using CellId 16707 20:47:06.121262 tst cs_paging_gprs_active.py: using BVCI 16708 20:47:06.146131 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.157442 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.168514 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.180005 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.191246 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.202549 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.214213 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.225692 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:06.237233 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:47:06.354312 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:47:06.635687 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:47:06.759946 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:47:07.069664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12714): Launched 20:47:07.327819 run iperf3-srv_10.42.42.10(pid=12715): Launched 20:47:07.510356 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:47:07.634498 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:47:07.943748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12716): Launched 20:47:08.200535 run iperf3-srv_10.42.42.10(pid=12717): Launched 20:47:08.381933 tst cs_paging_gprs_active.py:38: start network... 20:47:08.505953 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:47:08.974796 run create_hlr_db(pid=12718): Launched 20:47:09.145694 bus /gobi_6: Setting Powered False 20:47:10.168131 run create_hlr_db(pid=12718): Terminated: ok {rc=0} 20:47:10.592690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12720): Launched 20:47:10.911513 run osmo-hlr_10.42.42.2(pid=12721): Launched 20:47:11.027827 run osmo-stp_10.42.42.5: Starting osmo-stp 20:47:11.581495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12723): Launched 20:47:11.900186 run osmo-stp_10.42.42.5(pid=12724): Launched 20:47:12.015595 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:47:12.571709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12726): Launched 20:47:12.686328 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:47:12.964897 run patchelf(pid=12727): Launched 20:47:13.151617 run osmo-stp_10.42.42.5(pid=12724): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12724)] 20:47:13.288123 run osmo-stp_10.42.42.5(pid=12724): stdout: | (launched: 2022-12-08_20:47:11.743396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:47:13.424847 run osmo-stp_10.42.42.5(pid=12724): stderr: | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208204711936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:47:13.556476 run osmo-stp_10.42.42.5(pid=12724): stdout: | (launched: 2022-12-08_20:47:11.743396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:47:13.686986 run osmo-stp_10.42.42.5(pid=12724): stderr: | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208204711936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208204711936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208204711937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:47:13.839075 run patchelf(pid=12727): Terminating (SIGINT) 20:47:14.017650 run patchelf(pid=12727): Terminated: ok {rc=0} 20:47:14.050380 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12724): Process ended prematurely: osmo-stp_10.42.42.5(pid=12724) [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12724)] [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:47:14.060171 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:47:14.122418 run osmo-hlr_10.42.42.2(pid=12721): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12721)] 20:47:14.173387 run osmo-hlr_10.42.42.2(pid=12721): stdout: | (launched: 2022-12-08_20:47:10.755763) 20:47:14.224995 run osmo-hlr_10.42.42.2(pid=12721): stderr: | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208204710953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208204710965 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208204710974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208204710974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208204710974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:47:14.268940 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12714): Terminating (SIGTERM) 20:47:14.310416 run iperf3-srv_10.42.42.10(pid=12715): Terminating (SIGTERM) 20:47:14.352036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12716): Terminating (SIGTERM) 20:47:14.393522 run iperf3-srv_10.42.42.10(pid=12717): Terminating (SIGTERM) 20:47:14.435168 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12720): Terminating (SIGTERM) 20:47:14.476636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12723): Terminating (SIGTERM) 20:47:14.518369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12726): Terminating (SIGTERM) 20:47:14.527953 --- ParallelTerminationStrategy: PID 12714 died... 20:47:14.583496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12714): Terminated: ok {rc=0} 20:47:14.593534 --- ParallelTerminationStrategy: PID 12715 died... 20:47:14.649230 run iperf3-srv_10.42.42.10(pid=12715): Terminated {rc=256} 20:47:14.659139 --- ParallelTerminationStrategy: PID 12716 died... 20:47:14.714831 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12716): Terminated: ok {rc=0} 20:47:14.724812 --- ParallelTerminationStrategy: PID 12717 died... 20:47:14.779905 run iperf3-srv_10.42.42.10(pid=12717): Terminated {rc=256} 20:47:14.789994 --- ParallelTerminationStrategy: PID 12720 died... 20:47:14.845172 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12720): Terminated: ok {rc=0} 20:47:14.855199 --- ParallelTerminationStrategy: PID 12723 died... 20:47:14.910612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12723): Terminated: ok {rc=0} 20:47:14.920704 --- ParallelTerminationStrategy: PID 12726 died... 20:47:14.975977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12726): Terminated: ok {rc=0} 20:47:15.061489 bus /gobi_0: Setting Powered False 20:47:16.183258 bus /gobi_0: Setting Powered False 20:47:17.294826 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12724): Process ended prematurely: osmo-stp_10.42.42.5(pid=12724) [trial-2349↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12724)]