Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12589): Process ended prematurely: osmo-stp_10.42.42.5(pid=12589) [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12589)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:45:07.391000 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.401897 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:45:07.538031 tst cs_paging_gprs_active.py: using LAC 16697 20:45:07.654547 tst cs_paging_gprs_active.py: using RAC 122 20:45:07.775867 tst cs_paging_gprs_active.py: using CellId 16697 20:45:07.892682 tst cs_paging_gprs_active.py: using BVCI 16698 20:45:07.915771 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.926768 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.937457 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.948940 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.960216 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.971513 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.982901 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:07.994404 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:08.005969 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:45:08.129083 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:45:08.406948 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:45:08.532741 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:45:08.844554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12579): Launched 20:45:09.103581 run iperf3-srv_10.42.42.10(pid=12580): Launched 20:45:09.287144 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:45:09.413034 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:45:09.724311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12581): Launched 20:45:09.982995 run iperf3-srv_10.42.42.10(pid=12582): Launched 20:45:10.165665 tst cs_paging_gprs_active.py:38: start network... 20:45:10.290917 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:45:10.762349 run create_hlr_db(pid=12583): Launched 20:45:10.934496 bus /gobi_6: Setting Powered False 20:45:11.957310 run create_hlr_db(pid=12583): Terminated: ok {rc=0} 20:45:12.385854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12585): Launched 20:45:12.707029 run osmo-hlr_10.42.42.2(pid=12586): Launched 20:45:12.824770 run osmo-stp_10.42.42.5: Starting osmo-stp 20:45:13.382026 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12588): Launched 20:45:13.703030 run osmo-stp_10.42.42.5(pid=12589): Launched 20:45:13.819252 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:45:14.379553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12591): Launched 20:45:14.494011 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:45:14.772707 run patchelf(pid=12592): Launched 20:45:14.960611 run osmo-stp_10.42.42.5(pid=12589): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12589)] 20:45:15.098325 run osmo-stp_10.42.42.5(pid=12589): stdout: | (launched: 2022-12-08_20:45:13.545760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:45:15.235811 run osmo-stp_10.42.42.5(pid=12589): stderr: | �[0;m�[38;5;43m20221208204513737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208204513737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208204513738 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208204513738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208204513738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208204513738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208204513739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:45:15.369225 run osmo-stp_10.42.42.5(pid=12589): stdout: | (launched: 2022-12-08_20:45:13.545760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:45:15.501278 run osmo-stp_10.42.42.5(pid=12589): stderr: | �[0;m�[38;5;43m20221208204513737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208204513737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208204513738 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208204513738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208204513738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208204513738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208204513739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:45:15.654694 run patchelf(pid=12592): Terminating (SIGINT) 20:45:15.839000 run patchelf(pid=12592): Terminated: ok {rc=0} 20:45:15.874378 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12589): Process ended prematurely: osmo-stp_10.42.42.5(pid=12589) [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12589)] [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:45:15.884672 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:45:15.953314 run osmo-hlr_10.42.42.2(pid=12586): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12586)] 20:45:16.004874 run osmo-hlr_10.42.42.2(pid=12586): stdout: | (launched: 2022-12-08_20:45:12.549733) 20:45:16.057313 run osmo-hlr_10.42.42.2(pid=12586): stderr: | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208204512748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208204512760 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208204512768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208204512768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208204512768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:45:16.102486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12579): Terminating (SIGTERM) 20:45:16.146559 run iperf3-srv_10.42.42.10(pid=12580): Terminating (SIGTERM) 20:45:16.190534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12581): Terminating (SIGTERM) 20:45:16.233659 run iperf3-srv_10.42.42.10(pid=12582): Terminating (SIGTERM) 20:45:16.278907 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12585): Terminating (SIGTERM) 20:45:16.321860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12588): Terminating (SIGTERM) 20:45:16.366017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12591): Terminating (SIGTERM) 20:45:16.375872 --- ParallelTerminationStrategy: PID 12579 died... 20:45:16.432455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12579): Terminated: ok {rc=0} 20:45:16.443021 --- ParallelTerminationStrategy: PID 12580 died... 20:45:16.499244 run iperf3-srv_10.42.42.10(pid=12580): Terminated {rc=256} 20:45:16.509722 --- ParallelTerminationStrategy: PID 12581 died... 20:45:16.565432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12581): Terminated: ok {rc=0} 20:45:16.575854 --- ParallelTerminationStrategy: PID 12582 died... 20:45:16.632174 run iperf3-srv_10.42.42.10(pid=12582): Terminated {rc=256} 20:45:16.643079 --- ParallelTerminationStrategy: PID 12585 died... 20:45:16.699932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12585): Terminated: ok {rc=0} 20:45:16.710461 --- ParallelTerminationStrategy: PID 12588 died... 20:45:16.768359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12588): Terminated: ok {rc=0} 20:45:16.779454 --- ParallelTerminationStrategy: PID 12591 died... 20:45:16.835642 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12591): Terminated: ok {rc=0} 20:45:16.924173 bus /gobi_0: Setting Powered False 20:45:18.028243 bus /gobi_0: Setting Powered False 20:45:19.134398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12589): Process ended prematurely: osmo-stp_10.42.42.5(pid=12589) [trial-2349↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12589)]