Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=20450): Process ended prematurely: osmo-stp_10.42.42.5(pid=20450) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20450)]
Standard Output
---------------------------------------------- trial-2350 dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 22:19:33.942196 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:33.953856 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 22:19:34.119584 tst switch_tch_pdch.py: using LAC 17129 22:19:34.242106 tst switch_tch_pdch.py: using RAC 44 22:19:34.368021 tst switch_tch_pdch.py: using CellId 17129 22:19:34.491807 tst switch_tch_pdch.py: using BVCI 17130 22:19:34.516195 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.527871 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.539321 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.550872 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.562468 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.573909 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.585529 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:19:34.597087 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 22:19:34.716140 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 22:19:34.988730 tst switch_tch_pdch.py:51: start network... 22:19:35.112492 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:19:35.581319 run create_hlr_db(pid=20444): Launched 22:19:35.753556 bus /gobi_6: Setting Powered False 22:19:36.774921 run create_hlr_db(pid=20444): Terminated: ok {rc=0} 22:19:37.197434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20446): Launched 22:19:37.514809 run osmo-hlr_10.42.42.2(pid=20447): Launched 22:19:37.636231 run osmo-stp_10.42.42.5: Starting osmo-stp 22:19:38.188123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20449): Launched 22:19:38.503330 run osmo-stp_10.42.42.5(pid=20450): Launched 22:19:38.619217 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:19:39.172838 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20452): Launched 22:19:39.286426 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:19:39.562933 run patchelf(pid=20453): Launched 22:19:39.749097 run osmo-stp_10.42.42.5(pid=20450): ERR: Terminated: ERROR {rc=1} [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20450)] 22:19:39.885347 run osmo-stp_10.42.42.5(pid=20450): stdout: | (launched: 2022-12-08_22:19:38.349518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:40.023562 run osmo-stp_10.42.42.5(pid=20450): stderr: | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221938539 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:40.155050 run osmo-stp_10.42.42.5(pid=20450): stdout: | (launched: 2022-12-08_22:19:38.349518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:40.285078 run osmo-stp_10.42.42.5(pid=20450): stderr: | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221938538 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221938539 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221938539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:40.436918 run patchelf(pid=20453): Terminating (SIGINT) 22:19:40.615307 run patchelf(pid=20453): Terminated: ok {rc=0} 22:19:40.647642 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=20450): Process ended prematurely: osmo-stp_10.42.42.5(pid=20450) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20450)] [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 22:19:40.656886 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 22:19:40.720153 run osmo-hlr_10.42.42.2(pid=20447): ERR: Terminated: ERROR {rc=237} [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20447)] 22:19:40.772061 run osmo-hlr_10.42.42.2(pid=20447): stdout: | (launched: 2022-12-08_22:19:37.360683) 22:19:40.824694 run osmo-hlr_10.42.42.2(pid=20447): stderr: | �[0;m�[1;31m20221208221937559 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221937559 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221937559 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221937559 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221937559 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221937560 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221937573 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221937582 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221937583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221937583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:19:40.869564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20446): Terminating (SIGTERM) 22:19:40.911882 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20449): Terminating (SIGTERM) 22:19:40.954244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20452): Terminating (SIGTERM) 22:19:40.963902 --- ParallelTerminationStrategy: PID 20446 died... 22:19:41.020420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20446): Terminated: ok {rc=0} 22:19:41.030621 --- ParallelTerminationStrategy: PID 20449 died... 22:19:41.086873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20449): Terminated: ok {rc=0} 22:19:41.097083 --- ParallelTerminationStrategy: PID 20452 died... 22:19:41.153237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20452): Terminated: ok {rc=0} 22:19:41.240557 bus /gobi_0: Setting Powered False 22:19:42.347938 bus /gobi_0: Setting Powered False 22:19:43.454729 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20450): Process ended prematurely: osmo-stp_10.42.42.5(pid=20450) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20450)]