Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22246): Process ended prematurely: osmo-stp_10.42.42.5(pid=22246) [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22246)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:33:42.467083 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:42.478257 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:33:42.623752 tst cs_paging_gprs_active.py: using LAC 17205 22:33:42.750602 tst cs_paging_gprs_active.py: using RAC 120 22:33:42.877194 tst cs_paging_gprs_active.py: using CellId 17205 22:33:43.005927 tst cs_paging_gprs_active.py: using BVCI 17206 22:33:43.030662 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.041941 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.052896 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.064414 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.075433 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.086484 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.097679 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.108611 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:43.119873 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:43.234276 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:43.526715 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:33:43.661937 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:43.997250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22236): Launched 22:33:44.275294 run iperf3-srv_10.42.42.10(pid=22237): Launched 22:33:44.474007 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:33:44.609028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:44.943110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Launched 22:33:45.221348 run iperf3-srv_10.42.42.10(pid=22239): Launched 22:33:45.420229 tst cs_paging_gprs_active.py:38: start network... 22:33:45.555640 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:33:46.148118 run create_hlr_db(pid=22240): Launched 22:33:46.366556 bus /gobi_6: Setting Powered False 22:33:47.358405 run create_hlr_db(pid=22240): Terminated: ok {rc=0} 22:33:47.810576 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22242): Launched 22:33:48.133892 run osmo-hlr_10.42.42.2(pid=22243): Launched 22:33:48.254177 run osmo-stp_10.42.42.5: Starting osmo-stp 22:33:48.818729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22245): Launched 22:33:49.139929 run osmo-stp_10.42.42.5(pid=22246): Launched 22:33:49.262184 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:33:49.827405 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22248): Launched 22:33:49.942906 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:33:50.224835 run patchelf(pid=22249): Launched 22:33:50.416496 run osmo-stp_10.42.42.5(pid=22246): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22246)] 22:33:50.555356 run osmo-stp_10.42.42.5(pid=22246): stdout: | (launched: 2022-12-08_22:33:48.983704) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:50.694986 run osmo-stp_10.42.42.5(pid=22246): stderr: | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208223349178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:50.830122 run osmo-stp_10.42.42.5(pid=22246): stdout: | (launched: 2022-12-08_22:33:48.983704) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:50.964676 run osmo-stp_10.42.42.5(pid=22246): stderr: | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208223349177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208223349178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208223349178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:51.119769 run patchelf(pid=22249): Terminating (SIGINT) 22:33:51.301456 run patchelf(pid=22249): Terminated: ok {rc=0} 22:33:51.334847 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22246): Process ended prematurely: osmo-stp_10.42.42.5(pid=22246) [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22246)] [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:33:51.344823 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:33:51.408904 run osmo-hlr_10.42.42.2(pid=22243): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22243)] 22:33:51.461230 run osmo-hlr_10.42.42.2(pid=22243): stdout: | (launched: 2022-12-08_22:33:47.976177) 22:33:51.514070 run osmo-hlr_10.42.42.2(pid=22243): stderr: | �[0;m�[1;31m20221208223348175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208223348176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208223348176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208223348176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208223348176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208223348176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208223348188 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208223348196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208223348196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208223348197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:33:51.559096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22236): Terminating (SIGTERM) 22:33:51.601407 run iperf3-srv_10.42.42.10(pid=22237): Terminating (SIGTERM) 22:33:51.643738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Terminating (SIGTERM) 22:33:51.685770 run iperf3-srv_10.42.42.10(pid=22239): Terminating (SIGTERM) 22:33:51.727851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22242): Terminating (SIGTERM) 22:33:51.770095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22245): Terminating (SIGTERM) 22:33:51.812390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22248): Terminating (SIGTERM) 22:33:51.822208 --- ParallelTerminationStrategy: PID 22236 died... 22:33:51.878756 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22236): Terminated: ok {rc=0} 22:33:51.888887 --- ParallelTerminationStrategy: PID 22237 died... 22:33:51.945078 run iperf3-srv_10.42.42.10(pid=22237): Terminated {rc=256} 22:33:51.955281 --- ParallelTerminationStrategy: PID 22238 died... 22:33:52.011770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Terminated: ok {rc=0} 22:33:52.021970 --- ParallelTerminationStrategy: PID 22239 died... 22:33:52.078746 run iperf3-srv_10.42.42.10(pid=22239): Terminated {rc=256} 22:33:52.089075 --- ParallelTerminationStrategy: PID 22242 died... 22:33:52.145388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22242): Terminated: ok {rc=0} 22:33:52.155628 --- ParallelTerminationStrategy: PID 22245 died... 22:33:52.212088 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22245): Terminated: ok {rc=0} 22:33:52.222333 --- ParallelTerminationStrategy: PID 22248 died... 22:33:52.278609 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22248): Terminated: ok {rc=0} 22:33:52.367197 bus /gobi_0: Setting Powered False 22:33:53.474643 bus /gobi_0: Setting Powered False 22:33:54.584308 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22246): Process ended prematurely: osmo-stp_10.42.42.5(pid=22246) [trial-2350↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22246)]