Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31380): Process ended prematurely: osmo-stp_10.42.42.5(pid=31380) [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31380)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:01:00.871690 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:00.883640 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:01:01.051473 tst cs_paging_gprs_active.py: using LAC 17666 00:01:01.201458 tst cs_paging_gprs_active.py: using RAC 71 00:01:01.345358 tst cs_paging_gprs_active.py: using CellId 17666 00:01:01.512912 tst cs_paging_gprs_active.py: using BVCI 17667 00:01:01.544430 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.556555 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.568275 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.579905 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.591374 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.603670 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.616278 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.628176 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:01.640275 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:01:01.761650 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:01:02.104744 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:01:02.265574 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:01:02.581450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31370): Launched 00:01:02.843222 run iperf3-srv_10.42.42.10(pid=31371): Launched 00:01:03.028652 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:01:03.155109 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:01:03.468932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31372): Launched 00:01:03.730917 run iperf3-srv_10.42.42.10(pid=31373): Launched 00:01:03.917078 tst cs_paging_gprs_active.py:38: start network... 00:01:04.043565 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:01:04.529204 run create_hlr_db(pid=31374): Launched 00:01:04.703662 bus /gobi_6: Setting Powered False 00:01:05.725029 run create_hlr_db(pid=31374): Terminated: ok {rc=0} 00:01:06.127664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31376): Launched 00:01:06.429927 run osmo-hlr_10.42.42.2(pid=31377): Launched 00:01:06.545070 run osmo-stp_10.42.42.5: Starting osmo-stp 00:01:07.071349 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31379): Launched 00:01:07.375521 run osmo-stp_10.42.42.5(pid=31380): Launched 00:01:07.486599 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:01:08.016455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31382): Launched 00:01:08.124503 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:01:08.388079 run patchelf(pid=31383): Launched 00:01:08.567463 run osmo-stp_10.42.42.5(pid=31380): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31380)] 00:01:08.697365 run osmo-stp_10.42.42.5(pid=31380): stdout: | (launched: 2022-12-09_00:01:07.225592) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:08.826896 run osmo-stp_10.42.42.5(pid=31380): stderr: | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000107398 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:08.952585 run osmo-stp_10.42.42.5(pid=31380): stdout: | (launched: 2022-12-09_00:01:07.225592) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:09.077267 run osmo-stp_10.42.42.5(pid=31380): stderr: | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000107397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000107398 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000107398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:09.222211 run patchelf(pid=31383): Terminating (SIGINT) 00:01:09.392008 run patchelf(pid=31383): Terminated: ok {rc=0} 00:01:09.423244 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31380): Process ended prematurely: osmo-stp_10.42.42.5(pid=31380) [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31380)] [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:01:09.432390 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:01:09.490760 run osmo-hlr_10.42.42.2(pid=31377): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31377)] 00:01:09.538443 run osmo-hlr_10.42.42.2(pid=31377): stdout: | (launched: 2022-12-09_00:01:06.281663) 00:01:09.586962 run osmo-hlr_10.42.42.2(pid=31377): stderr: | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209000106460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209000106472 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209000106481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209000106481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209000106481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:01:09.628561 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31370): Terminating (SIGTERM) 00:01:09.667352 run iperf3-srv_10.42.42.10(pid=31371): Terminating (SIGTERM) 00:01:09.706245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31372): Terminating (SIGTERM) 00:01:09.745019 run iperf3-srv_10.42.42.10(pid=31373): Terminating (SIGTERM) 00:01:09.783696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31376): Terminating (SIGTERM) 00:01:09.822590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31379): Terminating (SIGTERM) 00:01:09.861424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31382): Terminating (SIGTERM) 00:01:09.870487 --- ParallelTerminationStrategy: PID 31370 died... 00:01:09.922800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31370): Terminated: ok {rc=0} 00:01:09.932167 --- ParallelTerminationStrategy: PID 31371 died... 00:01:09.983662 run iperf3-srv_10.42.42.10(pid=31371): Terminated {rc=256} 00:01:09.993212 --- ParallelTerminationStrategy: PID 31372 died... 00:01:10.044910 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31372): Terminated: ok {rc=0} 00:01:10.054447 --- ParallelTerminationStrategy: PID 31373 died... 00:01:10.106099 run iperf3-srv_10.42.42.10(pid=31373): Terminated {rc=256} 00:01:10.115500 --- ParallelTerminationStrategy: PID 31376 died... 00:01:10.167229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31376): Terminated: ok {rc=0} 00:01:10.176648 --- ParallelTerminationStrategy: PID 31379 died... 00:01:10.228316 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31379): Terminated: ok {rc=0} 00:01:10.237860 --- ParallelTerminationStrategy: PID 31382 died... 00:01:10.289554 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31382): Terminated: ok {rc=0} 00:01:10.370943 bus /gobi_0: Setting Powered False 00:01:11.470982 bus /gobi_0: Setting Powered False 00:01:12.580503 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31380): Process ended prematurely: osmo-stp_10.42.42.5(pid=31380) [trial-2351↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31380)]