Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27963): Process ended prematurely: osmo-stp_10.42.42.5(pid=27963) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27963)]
Standard Output
---------------------------------------------- trial-2351 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:28:32.468635 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:32.479890 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:28:32.625307 tst cs_paging_gprs_active.py: using LAC 17492 23:28:32.751507 tst cs_paging_gprs_active.py: using RAC 152 23:28:32.876790 tst cs_paging_gprs_active.py: using CellId 17492 23:28:33.007019 tst cs_paging_gprs_active.py: using BVCI 17493 23:28:33.032199 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.043542 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.054605 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.066313 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.077756 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.089120 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.100636 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.111902 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:33.123954 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:33.238196 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:33.513918 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:28:33.639116 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:33.948754 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27953): Launched 23:28:34.208057 run iperf3-srv_10.42.42.10(pid=27954): Launched 23:28:34.392308 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:28:34.517994 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:34.828368 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27955): Launched 23:28:35.086872 run iperf3-srv_10.42.42.10(pid=27956): Launched 23:28:35.270806 tst cs_paging_gprs_active.py:38: start network... 23:28:35.396192 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:28:35.871389 run create_hlr_db(pid=27957): Launched 23:28:36.044939 bus /gobi_6: Setting Powered False 23:28:37.066518 run create_hlr_db(pid=27957): Terminated: ok {rc=0} 23:28:37.491837 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27959): Launched 23:28:37.811509 run osmo-hlr_10.42.42.2(pid=27960): Launched 23:28:37.929767 run osmo-stp_10.42.42.5: Starting osmo-stp 23:28:38.486763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27962): Launched 23:28:38.806077 run osmo-stp_10.42.42.5(pid=27963): Launched 23:28:38.921882 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:28:39.478835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27965): Launched 23:28:39.593021 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:28:39.870937 run patchelf(pid=27966): Launched 23:28:40.055287 run osmo-stp_10.42.42.5(pid=27963): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27963)] 23:28:40.184611 run osmo-stp_10.42.42.5(pid=27963): stdout: | (launched: 2022-12-08_23:28:38.649870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:40.314203 run osmo-stp_10.42.42.5(pid=27963): stderr: | �[0;m�[38;5;43m20221208232838842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232838843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232838843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232838843 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:40.439016 run osmo-stp_10.42.42.5(pid=27963): stdout: | (launched: 2022-12-08_23:28:38.649870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:40.563094 run osmo-stp_10.42.42.5(pid=27963): stderr: | �[0;m�[38;5;43m20221208232838842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232838843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232838843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232838843 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232838844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:40.707082 run patchelf(pid=27966): Terminating (SIGINT) 23:28:40.875788 run patchelf(pid=27966): Terminated: ok {rc=0} 23:28:40.907013 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27963): Process ended prematurely: osmo-stp_10.42.42.5(pid=27963) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27963)] [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:28:40.916119 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:28:40.975424 run osmo-hlr_10.42.42.2(pid=27960): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27960)] 23:28:41.023643 run osmo-hlr_10.42.42.2(pid=27960): stdout: | (launched: 2022-12-08_23:28:37.654837) 23:28:41.072675 run osmo-hlr_10.42.42.2(pid=27960): stderr: | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208232837854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208232837867 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208232837875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208232837875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208232837875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:28:41.114495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27953): Terminating (SIGTERM) 23:28:41.153744 run iperf3-srv_10.42.42.10(pid=27954): Terminating (SIGTERM) 23:28:41.193132 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27955): Terminating (SIGTERM) 23:28:41.232375 run iperf3-srv_10.42.42.10(pid=27956): Terminating (SIGTERM) 23:28:41.271739 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27959): Terminating (SIGTERM) 23:28:41.311040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27962): Terminating (SIGTERM) 23:28:41.350301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27965): Terminating (SIGTERM) 23:28:41.359413 --- ParallelTerminationStrategy: PID 27953 died... 23:28:41.411907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27953): Terminated: ok {rc=0} 23:28:41.421546 --- ParallelTerminationStrategy: PID 27954 died... 23:28:41.473246 run iperf3-srv_10.42.42.10(pid=27954): Terminated {rc=256} 23:28:41.482799 --- ParallelTerminationStrategy: PID 27955 died... 23:28:41.535153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27955): Terminated: ok {rc=0} 23:28:41.545078 --- ParallelTerminationStrategy: PID 27956 died... 23:28:41.596855 run iperf3-srv_10.42.42.10(pid=27956): Terminated {rc=256} 23:28:41.606399 --- ParallelTerminationStrategy: PID 27959 died... 23:28:41.658331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27959): Terminated: ok {rc=0} 23:28:41.667829 --- ParallelTerminationStrategy: PID 27962 died... 23:28:41.719836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27962): Terminated: ok {rc=0} 23:28:41.729467 --- ParallelTerminationStrategy: PID 27965 died... 23:28:41.781922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27965): Terminated: ok {rc=0} 23:28:41.867495 bus /gobi_0: Setting Powered False 23:28:42.968862 bus /gobi_0: Setting Powered False 23:28:44.073413 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27963): Process ended prematurely: osmo-stp_10.42.42.5(pid=27963) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27963)]