Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26534): Process ended prematurely: osmo-stp_10.42.42.5(pid=26534) [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26534)]
Standard Output
---------------------------------------------- trial-2351 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 23:19:35.151354 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.162886 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:19:35.310460 tst cs_paging_gprs_active.py: using LAC 17445 23:19:35.431684 tst cs_paging_gprs_active.py: using RAC 105 23:19:35.554634 tst cs_paging_gprs_active.py: using CellId 17445 23:19:35.676103 tst cs_paging_gprs_active.py: using BVCI 17446 23:19:35.700242 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.711346 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.722240 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.733052 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.743783 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.754764 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.765901 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.776671 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:35.787758 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:19:35.910063 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:19:36.214861 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:19:36.355550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:36.703475 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26524): Launched 23:19:36.993957 run iperf3-srv_10.42.42.10(pid=26525): Launched 23:19:37.200491 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:19:37.341157 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:37.689432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26526): Launched 23:19:37.979797 run iperf3-srv_10.42.42.10(pid=26527): Launched 23:19:38.185689 tst cs_paging_gprs_active.py:38: start network... 23:19:38.325876 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:19:38.865273 run create_hlr_db(pid=26528): Launched 23:19:39.059784 bus /gobi_6: Setting Powered False 23:19:40.079570 run create_hlr_db(pid=26528): Terminated: ok {rc=0} 23:19:40.502998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26530): Launched 23:19:40.821014 run osmo-hlr_10.42.42.2(pid=26531): Launched 23:19:40.940856 run osmo-stp_10.42.42.5: Starting osmo-stp 23:19:41.488774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26533): Launched 23:19:41.806145 run osmo-stp_10.42.42.5(pid=26534): Launched 23:19:41.921694 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:19:42.473133 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26536): Launched 23:19:42.585259 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:19:42.861198 run patchelf(pid=26537): Launched 23:19:43.044268 run osmo-stp_10.42.42.5(pid=26534): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26534)] 23:19:43.178271 run osmo-stp_10.42.42.5(pid=26534): stdout: | (launched: 2022-12-08_23:19:41.649061) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:43.311988 run osmo-stp_10.42.42.5(pid=26534): stderr: | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208231941825 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:43.441368 run osmo-stp_10.42.42.5(pid=26534): stdout: | (launched: 2022-12-08_23:19:41.649061) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:43.569954 run osmo-stp_10.42.42.5(pid=26534): stderr: | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208231941824 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208231941825 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208231941825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:43.719513 run patchelf(pid=26537): Terminating (SIGINT) 23:19:43.895576 run patchelf(pid=26537): Terminated: ok {rc=0} 23:19:43.927972 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26534): Process ended prematurely: osmo-stp_10.42.42.5(pid=26534) [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26534)] [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 23:19:43.937429 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 23:19:43.997988 run osmo-hlr_10.42.42.2(pid=26531): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26531)] 23:19:44.046905 run osmo-hlr_10.42.42.2(pid=26531): stdout: | (launched: 2022-12-08_23:19:40.663948) 23:19:44.096501 run osmo-hlr_10.42.42.2(pid=26531): stderr: | �[0;m�[1;31m20221208231940843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208231940843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208231940843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208231940844 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208231940844 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208231940844 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208231940856 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208231940864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208231940865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208231940865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:19:44.138233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26524): Terminating (SIGTERM) 23:19:44.177663 run iperf3-srv_10.42.42.10(pid=26525): Terminating (SIGTERM) 23:19:44.217227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26526): Terminating (SIGTERM) 23:19:44.256729 run iperf3-srv_10.42.42.10(pid=26527): Terminating (SIGTERM) 23:19:44.296564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26530): Terminating (SIGTERM) 23:19:44.336170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26533): Terminating (SIGTERM) 23:19:44.375930 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26536): Terminating (SIGTERM) 23:19:44.385339 --- ParallelTerminationStrategy: PID 26524 died... 23:19:44.438677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26524): Terminated: ok {rc=0} 23:19:44.448443 --- ParallelTerminationStrategy: PID 26525 died... 23:19:44.501524 run iperf3-srv_10.42.42.10(pid=26525): Terminated {rc=256} 23:19:44.511088 --- ParallelTerminationStrategy: PID 26526 died... 23:19:44.563904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26526): Terminated: ok {rc=0} 23:19:44.573985 --- ParallelTerminationStrategy: PID 26527 died... 23:19:44.627074 run iperf3-srv_10.42.42.10(pid=26527): Terminated {rc=256} 23:19:44.636641 --- ParallelTerminationStrategy: PID 26530 died... 23:19:44.689754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26530): Terminated: ok {rc=0} 23:19:44.699514 --- ParallelTerminationStrategy: PID 26533 died... 23:19:44.752736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26533): Terminated: ok {rc=0} 23:19:44.762429 --- ParallelTerminationStrategy: PID 26536 died... 23:19:44.815477 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26536): Terminated: ok {rc=0} 23:19:44.903960 bus /gobi_0: Setting Powered False 23:19:46.016000 bus /gobi_0: Setting Powered False 23:19:47.141540 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26534): Process ended prematurely: osmo-stp_10.42.42.5(pid=26534) [trial-2351↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26534)]