Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28434): Process ended prematurely: osmo-stp_10.42.42.5(pid=28434) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28434)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:35:04.199702 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.211285 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:35:04.356406 tst cs_paging_gprs_active.py: using LAC 17528 23:35:04.486979 tst cs_paging_gprs_active.py: using RAC 188 23:35:04.611832 tst cs_paging_gprs_active.py: using CellId 17528 23:35:04.736569 tst cs_paging_gprs_active.py: using BVCI 17529 23:35:04.761188 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.772285 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.783214 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.794422 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.805541 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.816457 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.827510 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.839035 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:04.850498 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:35:04.966225 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:35:05.260753 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:35:05.395832 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:35:05.728122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28424): Launched 23:35:06.004701 run iperf3-srv_10.42.42.10(pid=28425): Launched 23:35:06.203652 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:35:06.338751 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:35:06.671725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28426): Launched 23:35:06.947448 run iperf3-srv_10.42.42.10(pid=28427): Launched 23:35:07.145647 tst cs_paging_gprs_active.py:38: start network... 23:35:07.282342 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:35:07.797070 run create_hlr_db(pid=28428): Launched 23:35:07.983139 bus /gobi_6: Setting Powered False 23:35:09.003660 run create_hlr_db(pid=28428): Terminated: ok {rc=0} 23:35:09.409243 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28430): Launched 23:35:09.712336 run osmo-hlr_10.42.42.2(pid=28431): Launched 23:35:09.831315 run osmo-stp_10.42.42.5: Starting osmo-stp 23:35:10.361481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28433): Launched 23:35:10.663478 run osmo-stp_10.42.42.5(pid=28434): Launched 23:35:10.774034 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:35:11.301713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28436): Launched 23:35:11.409528 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:35:11.673217 run patchelf(pid=28437): Launched 23:35:11.849963 run osmo-stp_10.42.42.5(pid=28434): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28434)] 23:35:11.978757 run osmo-stp_10.42.42.5(pid=28434): stdout: | (launched: 2022-12-08_23:35:10.514837) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:12.107921 run osmo-stp_10.42.42.5(pid=28434): stderr: | �[0;m�[38;5;43m20221208233510684 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233510685 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233510685 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233510685 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233510687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233510688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233510688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:12.233491 run osmo-stp_10.42.42.5(pid=28434): stdout: | (launched: 2022-12-08_23:35:10.514837) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:12.364384 run osmo-stp_10.42.42.5(pid=28434): stderr: | �[0;m�[38;5;43m20221208233510684 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233510685 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233510685 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233510685 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233510687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233510688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233510688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:12.515800 run patchelf(pid=28437): Terminating (SIGINT) 23:35:12.690630 run patchelf(pid=28437): Terminated: ok {rc=0} 23:35:12.723352 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28434): Process ended prematurely: osmo-stp_10.42.42.5(pid=28434) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28434)] [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:35:12.733454 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 23:35:12.797670 run osmo-hlr_10.42.42.2(pid=28431): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28431)] 23:35:12.849101 run osmo-hlr_10.42.42.2(pid=28431): stdout: | (launched: 2022-12-08_23:35:09.563140) 23:35:12.900786 run osmo-hlr_10.42.42.2(pid=28431): stderr: | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233509739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233509753 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233509762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233509762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233509762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:35:12.944209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28424): Terminating (SIGTERM) 23:35:12.989101 run iperf3-srv_10.42.42.10(pid=28425): Terminating (SIGTERM) 23:35:13.032850 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28426): Terminating (SIGTERM) 23:35:13.076678 run iperf3-srv_10.42.42.10(pid=28427): Terminating (SIGTERM) 23:35:13.119668 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28430): Terminating (SIGTERM) 23:35:13.164862 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28433): Terminating (SIGTERM) 23:35:13.209089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28436): Terminating (SIGTERM) 23:35:13.218721 --- ParallelTerminationStrategy: PID 28424 died... 23:35:13.273951 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28424): Terminated: ok {rc=0} 23:35:13.285483 --- ParallelTerminationStrategy: PID 28425 died... 23:35:13.341337 run iperf3-srv_10.42.42.10(pid=28425): Terminated {rc=256} 23:35:13.351649 --- ParallelTerminationStrategy: PID 28426 died... 23:35:13.407089 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28426): Terminated: ok {rc=0} 23:35:13.417771 --- ParallelTerminationStrategy: PID 28427 died... 23:35:13.471881 run iperf3-srv_10.42.42.10(pid=28427): Terminated {rc=256} 23:35:13.483236 --- ParallelTerminationStrategy: PID 28430 died... 23:35:13.539329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28430): Terminated: ok {rc=0} 23:35:13.549781 --- ParallelTerminationStrategy: PID 28433 died... 23:35:13.607020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28433): Terminated: ok {rc=0} 23:35:13.618724 --- ParallelTerminationStrategy: PID 28436 died... 23:35:13.675941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28436): Terminated: ok {rc=0} 23:35:13.763485 bus /gobi_0: Setting Powered False 23:35:14.865853 bus /gobi_0: Setting Powered False 23:35:16.018336 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28434): Process ended prematurely: osmo-stp_10.42.42.5(pid=28434) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28434)]