Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30051): Process ended prematurely: osmo-stp_10.42.42.5(pid=30051) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30051)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 23:46:45.667329 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:45.679910 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:46:45.849617 tst ping_idle_ping.py: using LAC 17589 23:46:45.982382 tst ping_idle_ping.py: using RAC 249 23:46:46.116136 tst ping_idle_ping.py: using CellId 17589 23:46:46.266302 tst ping_idle_ping.py: using BVCI 17590 23:46:46.299561 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.314774 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.331266 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.346187 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.361888 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.377731 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.393297 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:46:46.409135 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:46:46.743840 tst ping_idle_ping.py:24: start network... 23:46:46.874965 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:46:47.376395 run create_hlr_db(pid=30045): Launched 23:46:47.561390 bus /gobi_6: Setting Powered False 23:46:48.581633 run create_hlr_db(pid=30045): Terminated: ok {rc=0} 23:46:49.003747 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30047): Launched 23:46:49.319017 run osmo-hlr_10.42.42.2(pid=30048): Launched 23:46:49.437134 run osmo-stp_10.42.42.5: Starting osmo-stp 23:46:49.988383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30050): Launched 23:46:50.304721 run osmo-stp_10.42.42.5(pid=30051): Launched 23:46:50.419801 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:46:50.976577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30053): Launched 23:46:51.090136 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:46:51.366754 run patchelf(pid=30054): Launched 23:46:51.552855 run osmo-stp_10.42.42.5(pid=30051): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30051)] 23:46:51.689286 run osmo-stp_10.42.42.5(pid=30051): stdout: | (launched: 2022-12-08_23:46:50.150009) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:46:51.825584 run osmo-stp_10.42.42.5(pid=30051): stderr: | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234650341 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:46:51.957152 run osmo-stp_10.42.42.5(pid=30051): stdout: | (launched: 2022-12-08_23:46:50.150009) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:46:52.087079 run osmo-stp_10.42.42.5(pid=30051): stderr: | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234650340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234650341 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234650341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:46:52.238444 run patchelf(pid=30054): Terminating (SIGINT) 23:46:52.416046 run patchelf(pid=30054): Terminated: ok {rc=0} 23:46:52.448612 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30051): Process ended prematurely: osmo-stp_10.42.42.5(pid=30051) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30051)] [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 23:46:52.457963 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 23:46:52.520045 run osmo-hlr_10.42.42.2(pid=30048): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30048)] 23:46:52.570764 run osmo-hlr_10.42.42.2(pid=30048): stdout: | (launched: 2022-12-08_23:46:49.165469) 23:46:52.621933 run osmo-hlr_10.42.42.2(pid=30048): stderr: | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208234649362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208234649375 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208234649384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208234649384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208234649384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:46:52.665759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30047): Terminating (SIGTERM) 23:46:52.707245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30050): Terminating (SIGTERM) 23:46:52.748640 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30053): Terminating (SIGTERM) 23:46:52.758232 --- ParallelTerminationStrategy: PID 30047 died... 23:46:52.813080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30047): Terminated: ok {rc=0} 23:46:52.823027 --- ParallelTerminationStrategy: PID 30050 died... 23:46:52.877683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30050): Terminated: ok {rc=0} 23:46:52.887508 --- ParallelTerminationStrategy: PID 30053 died... 23:46:52.942202 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30053): Terminated: ok {rc=0} 23:46:53.028808 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30051): Process ended prematurely: osmo-stp_10.42.42.5(pid=30051) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30051)]