Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=9218): Process ended prematurely: osmo-stp_10.42.42.5(pid=9218) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9218)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:53:20.324754 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.337840 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:53:20.486302 tst cs_paging_gprs_active.py: using LAC 18250 01:53:20.614919 tst cs_paging_gprs_active.py: using RAC 145 01:53:20.746043 tst cs_paging_gprs_active.py: using CellId 18250 01:53:20.877028 tst cs_paging_gprs_active.py: using BVCI 18251 01:53:20.903363 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.916059 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.929276 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.943135 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.956429 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.968883 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.982338 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:20.995668 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:21.008550 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:53:21.135787 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:53:21.440465 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:53:21.580085 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:53:21.935652 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9207): Launched 01:53:22.237758 run iperf3-srv_10.42.42.10(pid=9208): Launched 01:53:22.443010 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:53:22.582898 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:53:22.939605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9209): Launched 01:53:23.239302 run iperf3-srv_10.42.42.10(pid=9210): Launched 01:53:23.443799 tst cs_paging_gprs_active.py:38: start network... 01:53:23.582619 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:53:24.152783 run create_hlr_db(pid=9211): Launched 01:53:24.348218 bus /gobi_6: Setting Powered False 01:53:25.369364 run create_hlr_db(pid=9211): Terminated: ok {rc=0} 01:53:25.826871 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9213): Launched 01:53:26.265507 run osmo-hlr_10.42.42.2(pid=9214): Launched 01:53:26.492156 run osmo-stp_10.42.42.5: Starting osmo-stp 01:53:27.018759 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9217): Launched 01:53:27.322822 run osmo-stp_10.42.42.5(pid=9218): Launched 01:53:27.433733 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:53:27.966037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9220): Launched 01:53:28.073851 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:53:28.338793 run patchelf(pid=9221): Launched 01:53:28.516484 run osmo-stp_10.42.42.5(pid=9218): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9218)] 01:53:28.646819 run osmo-stp_10.42.42.5(pid=9218): stdout: | (launched: 2022-12-09_01:53:27.173072) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:53:28.777883 run osmo-stp_10.42.42.5(pid=9218): stderr: | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015327343 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:53:28.903634 run osmo-stp_10.42.42.5(pid=9218): stdout: | (launched: 2022-12-09_01:53:27.173072) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:53:29.027619 run osmo-stp_10.42.42.5(pid=9218): stderr: | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015327342 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015327343 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015327344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:53:29.173171 run patchelf(pid=9221): Terminating (SIGINT) 01:53:29.344139 run patchelf(pid=9221): Terminated: ok {rc=0} 01:53:29.375778 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9218): Process ended prematurely: osmo-stp_10.42.42.5(pid=9218) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9218)] [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:53:29.385218 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 01:53:29.446152 run osmo-hlr_10.42.42.2(pid=9214): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9214)] 01:53:29.495456 run osmo-hlr_10.42.42.2(pid=9214): stdout: | (launched: 2022-12-09_01:53:25.997869) 01:53:29.545631 run osmo-hlr_10.42.42.2(pid=9214): stderr: | �[0;m�[1;31m20221209015326310 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209015326310 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209015326310 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209015326310 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209015326311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209015326311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209015326326 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209015326339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209015326339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209015326339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:53:29.588198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9207): Terminating (SIGTERM) 01:53:29.628138 run iperf3-srv_10.42.42.10(pid=9208): Terminating (SIGTERM) 01:53:29.668202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9209): Terminating (SIGTERM) 01:53:29.708048 run iperf3-srv_10.42.42.10(pid=9210): Terminating (SIGTERM) 01:53:29.748149 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9213): Terminating (SIGTERM) 01:53:29.787961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9217): Terminating (SIGTERM) 01:53:29.827981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9220): Terminating (SIGTERM) 01:53:29.837415 --- ParallelTerminationStrategy: PID 9207 died... 01:53:29.890882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9207): Terminated: ok {rc=0} 01:53:29.900744 --- ParallelTerminationStrategy: PID 9208 died... 01:53:29.953853 run iperf3-srv_10.42.42.10(pid=9208): Terminated {rc=256} 01:53:29.963627 --- ParallelTerminationStrategy: PID 9209 died... 01:53:30.016718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9209): Terminated: ok {rc=0} 01:53:30.026496 --- ParallelTerminationStrategy: PID 9210 died... 01:53:30.079749 run iperf3-srv_10.42.42.10(pid=9210): Terminated {rc=256} 01:53:30.089954 --- ParallelTerminationStrategy: PID 9213 died... 01:53:30.142902 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9213): Terminated: ok {rc=0} 01:53:30.152700 --- ParallelTerminationStrategy: PID 9217 died... 01:53:30.205964 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9217): Terminated: ok {rc=0} 01:53:30.215394 --- ParallelTerminationStrategy: PID 9220 died... 01:53:30.268596 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9220): Terminated: ok {rc=0} 01:53:30.357232 bus /gobi_0: Setting Powered False 01:53:31.475139 bus /gobi_0: Setting Powered False 01:53:32.590045 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9218): Process ended prematurely: osmo-stp_10.42.42.5(pid=9218) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9218)]