Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=9230): Process ended prematurely: osmo-stp_10.42.42.5(pid=9230) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9230)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 01:53:33.699989 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:33.712008 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:53:33.850932 tst iperf3.py: using LAC 18251 01:53:33.971229 tst iperf3.py: using RAC 146 01:53:34.091684 tst iperf3.py: using CellId 18251 01:53:34.211924 tst iperf3.py: using BVCI 18252 01:53:34.234986 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.246471 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.257712 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.269091 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.280480 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.291898 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.303402 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.314765 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:53:34.326423 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:53:34.605160 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:53:34.730383 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:53:35.043834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9222): Launched 01:53:35.306503 run iperf3-srv_10.42.42.10(pid=9223): Launched 01:53:35.490324 tst iperf3.py:8: start network... 01:53:35.615429 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:53:36.095358 run create_hlr_db(pid=9224): Launched 01:53:36.269940 bus /gobi_6: Setting Powered False 01:53:37.291377 run create_hlr_db(pid=9224): Terminated: ok {rc=0} 01:53:37.694064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9226): Launched 01:53:37.996710 run osmo-hlr_10.42.42.2(pid=9227): Launched 01:53:38.107758 run osmo-stp_10.42.42.5: Starting osmo-stp 01:53:38.634820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9229): Launched 01:53:38.938580 run osmo-stp_10.42.42.5(pid=9230): Launched 01:53:39.049695 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:53:39.578125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9232): Launched 01:53:39.685878 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:53:39.950318 run patchelf(pid=9233): Launched 01:53:40.128003 run osmo-stp_10.42.42.5(pid=9230): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9230)] 01:53:40.258607 run osmo-stp_10.42.42.5(pid=9230): stdout: | (launched: 2022-12-09_01:53:38.788048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:53:40.388796 run osmo-stp_10.42.42.5(pid=9230): stderr: | �[0;m�[38;5;43m20221209015338958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015338959 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015338959 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015338959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:53:40.514356 run osmo-stp_10.42.42.5(pid=9230): stdout: | (launched: 2022-12-09_01:53:38.788048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:53:40.638516 run osmo-stp_10.42.42.5(pid=9230): stderr: | �[0;m�[38;5;43m20221209015338958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015338959 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015338959 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015338959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015338960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:53:40.783404 run patchelf(pid=9233): Terminating (SIGINT) 01:53:40.954062 run patchelf(pid=9233): Terminated: ok {rc=0} 01:53:40.985558 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9230): Process ended prematurely: osmo-stp_10.42.42.5(pid=9230) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9230)] [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 01:53:40.994921 tst iperf3.py:8: Test FAILED (7.3 sec) 01:53:41.055867 run osmo-hlr_10.42.42.2(pid=9227): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9227)] 01:53:41.105420 run osmo-hlr_10.42.42.2(pid=9227): stdout: | (launched: 2022-12-09_01:53:37.847249) 01:53:41.155640 run osmo-hlr_10.42.42.2(pid=9227): stderr: | �[0;m�[1;31m20221209015338020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209015338021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209015338021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209015338021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209015338021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209015338021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209015338034 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209015338043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209015338043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209015338043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:53:41.198331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9222): Terminating (SIGTERM) 01:53:41.238665 run iperf3-srv_10.42.42.10(pid=9223): Terminating (SIGTERM) 01:53:41.278890 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9226): Terminating (SIGTERM) 01:53:41.319002 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9229): Terminating (SIGTERM) 01:53:41.359125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9232): Terminating (SIGTERM) 01:53:41.368476 --- ParallelTerminationStrategy: PID 9222 died... 01:53:41.422316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9222): Terminated: ok {rc=0} 01:53:41.432523 --- ParallelTerminationStrategy: PID 9223 died... 01:53:41.486252 run iperf3-srv_10.42.42.10(pid=9223): Terminated {rc=256} 01:53:41.495719 --- ParallelTerminationStrategy: PID 9226 died... 01:53:41.548638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9226): Terminated: ok {rc=0} 01:53:41.558376 --- ParallelTerminationStrategy: PID 9229 died... 01:53:41.611692 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9229): Terminated: ok {rc=0} 01:53:41.621224 --- ParallelTerminationStrategy: PID 9232 died... 01:53:41.674365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9232): Terminated: ok {rc=0} 01:53:41.758147 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9230): Process ended prematurely: osmo-stp_10.42.42.5(pid=9230) [trial-2352↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9230)]