Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=8785): Process ended prematurely: osmo-stp_10.42.42.5(pid=8785) [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8785)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 01:51:07.606823 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:07.618761 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:51:07.764003 tst ping_idle_ping.py: using LAC 18239 01:51:07.892198 tst ping_idle_ping.py: using RAC 134 01:51:08.019347 tst ping_idle_ping.py: using CellId 18239 01:51:08.148028 tst ping_idle_ping.py: using BVCI 18240 01:51:08.172740 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.183970 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.194996 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.206011 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.217004 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.227934 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.239211 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:51:08.250764 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:51:08.539496 tst ping_idle_ping.py:24: start network... 01:51:08.674446 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:51:09.194402 run create_hlr_db(pid=8779): Launched 01:51:09.383275 bus /gobi_6: Setting Powered False 01:51:10.403384 run create_hlr_db(pid=8779): Terminated: ok {rc=0} 01:51:10.809585 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8781): Launched 01:51:11.112112 run osmo-hlr_10.42.42.2(pid=8782): Launched 01:51:11.223158 run osmo-stp_10.42.42.5: Starting osmo-stp 01:51:11.746829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8784): Launched 01:51:12.048891 run osmo-stp_10.42.42.5(pid=8785): Launched 01:51:12.159289 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:51:12.685756 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8787): Launched 01:51:12.792805 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:51:13.058072 run patchelf(pid=8788): Launched 01:51:13.235034 run osmo-stp_10.42.42.5(pid=8785): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8785)] 01:51:13.364032 run osmo-stp_10.42.42.5(pid=8785): stdout: | (launched: 2022-12-09_01:51:11.899728) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:51:13.494174 run osmo-stp_10.42.42.5(pid=8785): stderr: | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015112069 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:51:13.618638 run osmo-stp_10.42.42.5(pid=8785): stdout: | (launched: 2022-12-09_01:51:11.899728) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:51:13.742290 run osmo-stp_10.42.42.5(pid=8785): stderr: | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015112068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015112069 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015112069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:51:13.886311 run patchelf(pid=8788): Terminating (SIGINT) 01:51:14.056154 run patchelf(pid=8788): Terminated: ok {rc=0} 01:51:14.086981 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8785): Process ended prematurely: osmo-stp_10.42.42.5(pid=8785) [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8785)] [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 01:51:14.095804 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 01:51:14.156600 run osmo-hlr_10.42.42.2(pid=8782): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8782)] 01:51:14.205966 run osmo-hlr_10.42.42.2(pid=8782): stdout: | (launched: 2022-12-09_01:51:10.962660) 01:51:14.255948 run osmo-hlr_10.42.42.2(pid=8782): stderr: | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209015111137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209015111151 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209015111159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209015111160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209015111160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:51:14.298362 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8781): Terminating (SIGTERM) 01:51:14.338791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8784): Terminating (SIGTERM) 01:51:14.378848 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8787): Terminating (SIGTERM) 01:51:14.388367 --- ParallelTerminationStrategy: PID 8781 died... 01:51:14.442538 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8781): Terminated: ok {rc=0} 01:51:14.452179 --- ParallelTerminationStrategy: PID 8784 died... 01:51:14.505700 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8784): Terminated: ok {rc=0} 01:51:14.515694 --- ParallelTerminationStrategy: PID 8787 died... 01:51:14.569283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8787): Terminated: ok {rc=0} 01:51:14.658445 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8785): Process ended prematurely: osmo-stp_10.42.42.5(pid=8785) [trial-2352↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8785)]