Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3446): Process ended prematurely: osmo-stp_10.42.42.5(pid=3446) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3446)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 00:50:11.875688 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:11.887997 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:50:12.044451 tst ping_idle_ping.py: using LAC 17915 00:50:12.174549 tst ping_idle_ping.py: using RAC 65 00:50:12.300555 tst ping_idle_ping.py: using CellId 17915 00:50:12.426191 tst ping_idle_ping.py: using BVCI 17916 00:50:12.451707 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.463273 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.474378 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.485843 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.496990 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.508257 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.519729 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:50:12.530854 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:50:12.826950 tst ping_idle_ping.py:24: start network... 00:50:12.962333 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:50:13.479249 run create_hlr_db(pid=3440): Launched 00:50:13.654077 bus /gobi_6: Setting Powered False 00:50:14.675661 run create_hlr_db(pid=3440): Terminated: ok {rc=0} 00:50:15.079858 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3442): Launched 00:50:15.383849 run osmo-hlr_10.42.42.2(pid=3443): Launched 00:50:15.500143 run osmo-stp_10.42.42.5: Starting osmo-stp 00:50:16.098623 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3445): Launched 00:50:16.507864 run osmo-stp_10.42.42.5(pid=3446): Launched 00:50:16.738116 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:50:17.342965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3448): Launched 00:50:17.460191 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:50:17.745054 run patchelf(pid=3449): Launched 00:50:17.935388 run osmo-stp_10.42.42.5(pid=3446): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3446)] 00:50:18.075302 run osmo-stp_10.42.42.5(pid=3446): stdout: | (launched: 2022-12-09_00:50:16.297104) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:50:18.215482 run osmo-stp_10.42.42.5(pid=3446): stderr: | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005016542 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005016542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005016542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005016543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:50:18.350482 run osmo-stp_10.42.42.5(pid=3446): stdout: | (launched: 2022-12-09_00:50:16.297104) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:50:18.484089 run osmo-stp_10.42.42.5(pid=3446): stderr: | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005016540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005016542 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005016542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005016542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005016543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:50:18.639700 run patchelf(pid=3449): Terminating (SIGINT) 00:50:18.822148 run patchelf(pid=3449): Terminated: ok {rc=0} 00:50:18.855269 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3446): Process ended prematurely: osmo-stp_10.42.42.5(pid=3446) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3446)] [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 00:50:18.864425 tst ping_idle_ping.py:27: Test FAILED (7.0 sec) 00:50:18.927795 run osmo-hlr_10.42.42.2(pid=3443): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3443)] 00:50:18.979822 run osmo-hlr_10.42.42.2(pid=3443): stdout: | (launched: 2022-12-09_00:50:15.233232) 00:50:19.032429 run osmo-hlr_10.42.42.2(pid=3443): stderr: | �[0;m�[1;31m20221209005015411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005015411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005015411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005015411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005015412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005015412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005015423 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005015433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005015433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005015433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:50:19.077391 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3442): Terminating (SIGTERM) 00:50:19.119481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3445): Terminating (SIGTERM) 00:50:19.161741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3448): Terminating (SIGTERM) 00:50:19.171528 --- ParallelTerminationStrategy: PID 3442 died... 00:50:19.228254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3442): Terminated: ok {rc=0} 00:50:19.238764 --- ParallelTerminationStrategy: PID 3445 died... 00:50:19.295555 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3445): Terminated: ok {rc=0} 00:50:19.306034 --- ParallelTerminationStrategy: PID 3448 died... 00:50:19.362351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3448): Terminated: ok {rc=0} 00:50:19.450343 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3446): Process ended prematurely: osmo-stp_10.42.42.5(pid=3446) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3446)]