Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8008): Process ended prematurely: osmo-stp_10.42.42.5(pid=8008) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8008)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:39:56.190266 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.201909 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:39:56.366141 tst cs_paging_gprs_active.py: using LAC 18179 01:39:56.488697 tst cs_paging_gprs_active.py: using RAC 74 01:39:56.607734 tst cs_paging_gprs_active.py: using CellId 18179 01:39:56.735810 tst cs_paging_gprs_active.py: using BVCI 18180 01:39:56.760640 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.772259 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.783641 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.795303 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.806736 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.818179 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.829640 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.840916 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:56.852505 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:56.975275 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:57.255325 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:39:57.380719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:57.694129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7995): Launched 01:39:57.954502 run iperf3-srv_10.42.42.10(pid=7996): Launched 01:39:58.139075 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:39:58.264761 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:58.578381 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7997): Launched 01:39:58.840111 run iperf3-srv_10.42.42.10(pid=7998): Launched 01:39:59.024404 tst cs_paging_gprs_active.py:38: start network... 01:39:59.150303 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:39:59.629677 run create_hlr_db(pid=7999): Launched 01:39:59.803593 bus /gobi_6: Setting Powered False 01:40:00.825304 run create_hlr_db(pid=7999): Terminated: ok {rc=0} 01:40:01.276829 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8004): Launched 01:40:01.702115 run osmo-hlr_10.42.42.2(pid=8005): Launched 01:40:01.962364 run osmo-stp_10.42.42.5: Starting osmo-stp 01:40:02.623712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8007): Launched 01:40:02.928647 run osmo-stp_10.42.42.5(pid=8008): Launched 01:40:03.040298 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:40:03.571331 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8010): Launched 01:40:03.679428 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:40:03.951559 run patchelf(pid=8011): Launched 01:40:04.130115 run osmo-stp_10.42.42.5(pid=8008): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8008)] 01:40:04.260546 run osmo-stp_10.42.42.5(pid=8008): stdout: | (launched: 2022-12-09_01:40:02.778073) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:40:04.391569 run osmo-stp_10.42.42.5(pid=8008): stderr: | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014002949 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:40:04.517536 run osmo-stp_10.42.42.5(pid=8008): stdout: | (launched: 2022-12-09_01:40:02.778073) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:40:04.642078 run osmo-stp_10.42.42.5(pid=8008): stderr: | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014002948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014002949 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014002949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:40:04.788278 run patchelf(pid=8011): Terminating (SIGINT) 01:40:04.959928 run patchelf(pid=8011): Terminated: ok {rc=0} 01:40:04.991436 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8008): Process ended prematurely: osmo-stp_10.42.42.5(pid=8008) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8008)] [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:40:05.000830 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:40:05.061788 run osmo-hlr_10.42.42.2(pid=8005): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8005)] 01:40:05.111213 run osmo-hlr_10.42.42.2(pid=8005): stdout: | (launched: 2022-12-09_01:40:01.449481) 01:40:05.161217 run osmo-hlr_10.42.42.2(pid=8005): stderr: | �[0;m�[1;31m20221209014001752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209014001752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209014001752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209014001753 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209014001753 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209014001753 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209014001771 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209014001789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209014001789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209014001790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:40:05.204012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7995): Terminating (SIGTERM) 01:40:05.244656 run iperf3-srv_10.42.42.10(pid=7996): Terminating (SIGTERM) 01:40:05.285106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7997): Terminating (SIGTERM) 01:40:05.325772 run iperf3-srv_10.42.42.10(pid=7998): Terminating (SIGTERM) 01:40:05.365979 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8004): Terminating (SIGTERM) 01:40:05.406283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8007): Terminating (SIGTERM) 01:40:05.446477 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8010): Terminating (SIGTERM) 01:40:05.456001 --- ParallelTerminationStrategy: PID 7995 died... 01:40:05.509954 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7995): Terminated: ok {rc=0} 01:40:05.519616 --- ParallelTerminationStrategy: PID 7996 died... 01:40:05.573839 run iperf3-srv_10.42.42.10(pid=7996): Terminated {rc=256} 01:40:05.583683 --- ParallelTerminationStrategy: PID 7997 died... 01:40:05.637357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7997): Terminated: ok {rc=0} 01:40:05.647224 --- ParallelTerminationStrategy: PID 7998 died... 01:40:05.700783 run iperf3-srv_10.42.42.10(pid=7998): Terminated {rc=256} 01:40:05.710646 --- ParallelTerminationStrategy: PID 8004 died... 01:40:05.764210 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8004): Terminated: ok {rc=0} 01:40:05.773853 --- ParallelTerminationStrategy: PID 8007 died... 01:40:05.827458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8007): Terminated: ok {rc=0} 01:40:05.837393 --- ParallelTerminationStrategy: PID 8010 died... 01:40:05.890961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8010): Terminated: ok {rc=0} 01:40:05.974535 bus /gobi_0: Setting Powered False 01:40:07.083910 bus /gobi_0: Setting Powered False 01:40:08.192602 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8008): Process ended prematurely: osmo-stp_10.42.42.5(pid=8008) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8008)]