Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6218): Process ended prematurely: osmo-stp_10.42.42.5(pid=6218) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6218)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:22:08.379616 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.390543 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:22:08.547831 tst cs_paging_gprs_active.py: using LAC 18085 01:22:08.669760 tst cs_paging_gprs_active.py: using RAC 235 01:22:08.792033 tst cs_paging_gprs_active.py: using CellId 18085 01:22:08.913841 tst cs_paging_gprs_active.py: using BVCI 18086 01:22:08.937289 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.948001 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.958648 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.969528 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.980711 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:08.991657 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:09.002607 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:09.013391 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:22:09.024301 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:22:09.143562 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:22:09.442061 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:22:09.579740 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:22:09.919331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6208): Launched 01:22:10.201925 run iperf3-srv_10.42.42.10(pid=6209): Launched 01:22:10.404458 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:22:10.542192 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:22:10.881926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6210): Launched 01:22:11.163048 run iperf3-srv_10.42.42.10(pid=6211): Launched 01:22:11.363045 tst cs_paging_gprs_active.py:38: start network... 01:22:11.500126 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:22:12.023783 run create_hlr_db(pid=6212): Launched 01:22:12.213428 bus /gobi_6: Setting Powered False 01:22:13.234350 run create_hlr_db(pid=6212): Terminated: ok {rc=0} 01:22:13.670600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6214): Launched 01:22:13.999442 run osmo-hlr_10.42.42.2(pid=6215): Launched 01:22:14.118957 run osmo-stp_10.42.42.5: Starting osmo-stp 01:22:14.687959 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6217): Launched 01:22:15.014495 run osmo-stp_10.42.42.5(pid=6218): Launched 01:22:15.132398 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:22:15.703735 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6220): Launched 01:22:15.820418 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:22:16.160781 run patchelf(pid=6221): Launched 01:22:16.357425 run osmo-stp_10.42.42.5(pid=6218): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6218)] 01:22:16.500729 run osmo-stp_10.42.42.5(pid=6218): stdout: | (launched: 2022-12-09_01:22:14.854289) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:16.643830 run osmo-stp_10.42.42.5(pid=6218): stderr: | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012215046 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:16.781722 run osmo-stp_10.42.42.5(pid=6218): stdout: | (launched: 2022-12-09_01:22:14.854289) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:16.918237 run osmo-stp_10.42.42.5(pid=6218): stderr: | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012215045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012215046 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012215046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:17.077245 run patchelf(pid=6221): Terminating (SIGINT) 01:22:17.262231 run patchelf(pid=6221): Terminated: ok {rc=0} 01:22:17.295892 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6218): Process ended prematurely: osmo-stp_10.42.42.5(pid=6218) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6218)] [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:22:17.305807 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 01:22:17.368866 run osmo-hlr_10.42.42.2(pid=6215): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6215)] 01:22:17.420672 run osmo-hlr_10.42.42.2(pid=6215): stdout: | (launched: 2022-12-09_01:22:13.837779) 01:22:17.472731 run osmo-hlr_10.42.42.2(pid=6215): stderr: | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209012214036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209012214049 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209012214057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209012214057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209012214057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:22:17.517213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6208): Terminating (SIGTERM) 01:22:17.558904 run iperf3-srv_10.42.42.10(pid=6209): Terminating (SIGTERM) 01:22:17.600673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6210): Terminating (SIGTERM) 01:22:17.642420 run iperf3-srv_10.42.42.10(pid=6211): Terminating (SIGTERM) 01:22:17.684270 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6214): Terminating (SIGTERM) 01:22:17.726022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6217): Terminating (SIGTERM) 01:22:17.767849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6220): Terminating (SIGTERM) 01:22:17.777639 --- ParallelTerminationStrategy: PID 6208 died... 01:22:17.833277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6208): Terminated: ok {rc=0} 01:22:17.843356 --- ParallelTerminationStrategy: PID 6209 died... 01:22:17.898856 run iperf3-srv_10.42.42.10(pid=6209): Terminated {rc=256} 01:22:17.908924 --- ParallelTerminationStrategy: PID 6210 died... 01:22:17.964537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6210): Terminated: ok {rc=0} 01:22:17.974659 --- ParallelTerminationStrategy: PID 6211 died... 01:22:18.030098 run iperf3-srv_10.42.42.10(pid=6211): Terminated {rc=256} 01:22:18.040177 --- ParallelTerminationStrategy: PID 6214 died... 01:22:18.095938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6214): Terminated: ok {rc=0} 01:22:18.106090 --- ParallelTerminationStrategy: PID 6217 died... 01:22:18.161744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6217): Terminated: ok {rc=0} 01:22:18.171884 --- ParallelTerminationStrategy: PID 6220 died... 01:22:18.227366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6220): Terminated: ok {rc=0} 01:22:18.315285 bus /gobi_0: Setting Powered False 01:22:19.418299 bus /gobi_0: Setting Powered False 01:22:20.528738 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6218): Process ended prematurely: osmo-stp_10.42.42.5(pid=6218) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6218)]