Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=16955): Process ended prematurely: osmo-stp_10.42.42.5(pid=16955) [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16955)]
Standard Output
---------------------------------------------- trial-2353 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 03:12:08.019067 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.031573 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 03:12:08.165356 tst ping_idle_ping.py: using LAC 18667 03:12:08.291236 tst ping_idle_ping.py: using RAC 52 03:12:08.414108 tst ping_idle_ping.py: using CellId 18667 03:12:08.530107 tst ping_idle_ping.py: using BVCI 18668 03:12:08.552466 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.563386 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.574271 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.585202 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.595952 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.606666 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.617602 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:12:08.628398 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:12:08.917424 tst ping_idle_ping.py:24: start network... 03:12:09.050227 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:12:09.561342 run create_hlr_db(pid=16949): Launched 03:12:09.745290 bus /gobi_6: Setting Powered False 03:12:10.766860 run create_hlr_db(pid=16949): Terminated: ok {rc=0} 03:12:11.164718 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16951): Launched 03:12:11.461389 run osmo-hlr_10.42.42.2(pid=16952): Launched 03:12:11.574545 run osmo-stp_10.42.42.5: Starting osmo-stp 03:12:12.127273 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16954): Launched 03:12:12.443631 run osmo-stp_10.42.42.5(pid=16955): Launched 03:12:12.557968 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:12:13.110554 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16957): Launched 03:12:13.223276 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:12:13.498952 run patchelf(pid=16958): Launched 03:12:13.684625 run osmo-stp_10.42.42.5(pid=16955): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16955)] 03:12:13.820235 run osmo-stp_10.42.42.5(pid=16955): stdout: | (launched: 2022-12-09_03:12:12.288614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:12:13.956063 run osmo-stp_10.42.42.5(pid=16955): stderr: | �[0;m�[38;5;43m20221209031212478 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031212479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031212479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031212479 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:12:14.087439 run osmo-stp_10.42.42.5(pid=16955): stdout: | (launched: 2022-12-09_03:12:12.288614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:12:14.217663 run osmo-stp_10.42.42.5(pid=16955): stderr: | �[0;m�[38;5;43m20221209031212478 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031212479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031212479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031212479 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031212480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:12:14.368463 run patchelf(pid=16958): Terminating (SIGINT) 03:12:14.546139 run patchelf(pid=16958): Terminated: ok {rc=0} 03:12:14.578238 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=16955): Process ended prematurely: osmo-stp_10.42.42.5(pid=16955) [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16955)] [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 03:12:14.587375 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 03:12:14.650271 run osmo-hlr_10.42.42.2(pid=16952): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16952)] 03:12:14.701104 run osmo-hlr_10.42.42.2(pid=16952): stdout: | (launched: 2022-12-09_03:12:11.315234) 03:12:14.752340 run osmo-hlr_10.42.42.2(pid=16952): stderr: | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209031211491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209031211504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209031211513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209031211513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209031211513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:12:14.796165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16951): Terminating (SIGTERM) 03:12:14.837752 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16954): Terminating (SIGTERM) 03:12:14.879284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16957): Terminating (SIGTERM) 03:12:14.889133 --- ParallelTerminationStrategy: PID 16951 died... 03:12:14.944637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16951): Terminated: ok {rc=0} 03:12:14.954837 --- ParallelTerminationStrategy: PID 16954 died... 03:12:15.010161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16954): Terminated: ok {rc=0} 03:12:15.020147 --- ParallelTerminationStrategy: PID 16957 died... 03:12:15.075113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16957): Terminated: ok {rc=0} 03:12:15.161209 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16955): Process ended prematurely: osmo-stp_10.42.42.5(pid=16955) [trial-2353↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16955)]