Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=17576): Process ended prematurely: osmo-stp_10.42.42.5(pid=17576) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17576)]
Standard Output
---------------------------------------------- trial-2353 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 03:20:38.372381 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.384666 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:20:38.527400 tst iperf3.py: using LAC 18712 03:20:38.654165 tst iperf3.py: using RAC 97 03:20:38.780340 tst iperf3.py: using CellId 18712 03:20:38.900373 tst iperf3.py: using BVCI 18713 03:20:38.923244 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.934803 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.945962 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.957669 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.969377 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.981012 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:38.992828 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:39.004935 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:39.016609 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:39.305164 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:20:39.437070 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:39.761895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17568): Launched 03:20:40.031927 run iperf3-srv_10.42.42.10(pid=17569): Launched 03:20:40.224760 tst iperf3.py:8: start network... 03:20:40.356687 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:20:40.859560 run create_hlr_db(pid=17570): Launched 03:20:41.041112 bus /gobi_6: Setting Powered False 03:20:42.061964 run create_hlr_db(pid=17570): Terminated: ok {rc=0} 03:20:42.456049 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17572): Launched 03:20:42.750596 run osmo-hlr_10.42.42.2(pid=17573): Launched 03:20:42.863106 run osmo-stp_10.42.42.5: Starting osmo-stp 03:20:43.372189 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17575): Launched 03:20:43.667129 run osmo-stp_10.42.42.5(pid=17576): Launched 03:20:43.775632 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:44.286804 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17578): Launched 03:20:44.391722 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:44.647299 run patchelf(pid=17579): Launched 03:20:44.819523 run osmo-stp_10.42.42.5(pid=17576): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17576)] 03:20:44.945466 run osmo-stp_10.42.42.5(pid=17576): stdout: | (launched: 2022-12-09_03:20:43.521628) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:45.071926 run osmo-stp_10.42.42.5(pid=17576): stderr: | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209032043693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:45.194138 run osmo-stp_10.42.42.5(pid=17576): stdout: | (launched: 2022-12-09_03:20:43.521628) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:45.315187 run osmo-stp_10.42.42.5(pid=17576): stderr: | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209032043692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209032043693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209032043693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:45.456115 run patchelf(pid=17579): Terminating (SIGINT) 03:20:45.621302 run patchelf(pid=17579): Terminated: ok {rc=0} 03:20:45.651764 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=17576): Process ended prematurely: osmo-stp_10.42.42.5(pid=17576) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17576)] [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 03:20:45.660848 tst iperf3.py:8: Test FAILED (7.3 sec) 03:20:45.720888 run osmo-hlr_10.42.42.2(pid=17573): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17573)] 03:20:45.769484 run osmo-hlr_10.42.42.2(pid=17573): stdout: | (launched: 2022-12-09_03:20:42.605932) 03:20:45.819017 run osmo-hlr_10.42.42.2(pid=17573): stderr: | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209032042778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209032042790 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209032042798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209032042799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209032042799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:45.897232 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17568): Terminating (SIGTERM) 03:20:45.938425 run iperf3-srv_10.42.42.10(pid=17569): Terminating (SIGTERM) 03:20:45.981770 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17572): Terminating (SIGTERM) 03:20:46.024131 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17575): Terminating (SIGTERM) 03:20:46.072304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17578): Terminating (SIGTERM) 03:20:46.083045 --- ParallelTerminationStrategy: PID 17568 died... 03:20:46.142738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17568): Terminated: ok {rc=0} 03:20:46.153766 --- ParallelTerminationStrategy: PID 17569 died... 03:20:46.212403 run iperf3-srv_10.42.42.10(pid=17569): Terminated {rc=256} 03:20:46.223185 --- ParallelTerminationStrategy: PID 17572 died... 03:20:46.282642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17572): Terminated: ok {rc=0} 03:20:46.293542 --- ParallelTerminationStrategy: PID 17575 died... 03:20:46.352683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17575): Terminated: ok {rc=0} 03:20:46.363627 --- ParallelTerminationStrategy: PID 17578 died... 03:20:46.422990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17578): Terminated: ok {rc=0} 03:20:46.524271 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17576): Process ended prematurely: osmo-stp_10.42.42.5(pid=17576) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17576)]