Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11728): Process ended prematurely: osmo-stp_10.42.42.5(pid=11728) [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11728)]
Standard Output
---------------------------------------------- trial-2353 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:24:46.974604 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:46.986510 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:24:47.163258 tst cs_paging_gprs_active.py: using LAC 18414 02:24:47.285692 tst cs_paging_gprs_active.py: using RAC 54 02:24:47.409740 tst cs_paging_gprs_active.py: using CellId 18414 02:24:47.534886 tst cs_paging_gprs_active.py: using BVCI 18415 02:24:47.558795 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.569996 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.580677 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.591512 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.602338 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.613228 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.624111 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.634922 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:47.645765 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:24:47.766848 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:24:48.053292 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:24:48.182118 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:24:48.500485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11718): Launched 02:24:48.764285 run iperf3-srv_10.42.42.10(pid=11719): Launched 02:24:48.951187 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:24:49.078329 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:24:49.396425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11720): Launched 02:24:49.661162 run iperf3-srv_10.42.42.10(pid=11721): Launched 02:24:49.848251 tst cs_paging_gprs_active.py:38: start network... 02:24:49.976111 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:24:50.467621 run create_hlr_db(pid=11722): Launched 02:24:50.644077 bus /gobi_6: Setting Powered False 02:24:51.666001 run create_hlr_db(pid=11722): Terminated: ok {rc=0} 02:24:52.101849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11724): Launched 02:24:52.433434 run osmo-hlr_10.42.42.2(pid=11725): Launched 02:24:52.557298 run osmo-stp_10.42.42.5: Starting osmo-stp 02:24:53.129317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11727): Launched 02:24:53.460769 run osmo-stp_10.42.42.5(pid=11728): Launched 02:24:53.582258 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:24:54.156290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11730): Launched 02:24:54.274235 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:24:54.561535 run patchelf(pid=11731): Launched 02:24:54.753039 run osmo-stp_10.42.42.5(pid=11728): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11728)] 02:24:54.893338 run osmo-stp_10.42.42.5(pid=11728): stdout: | (launched: 2022-12-09_02:24:53.297912) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:24:55.033906 run osmo-stp_10.42.42.5(pid=11728): stderr: | �[0;m�[38;5;43m20221209022453490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022453490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022453491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022453491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:24:55.170010 run osmo-stp_10.42.42.5(pid=11728): stdout: | (launched: 2022-12-09_02:24:53.297912) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:24:55.305557 run osmo-stp_10.42.42.5(pid=11728): stderr: | �[0;m�[38;5;43m20221209022453490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022453490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022453491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022453491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022453491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:24:55.462319 run patchelf(pid=11731): Terminating (SIGINT) 02:24:55.646022 run patchelf(pid=11731): Terminated: ok {rc=0} 02:24:55.679938 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11728): Process ended prematurely: osmo-stp_10.42.42.5(pid=11728) [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11728)] [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:24:55.689836 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:24:55.753299 run osmo-hlr_10.42.42.2(pid=11725): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11725)] 02:24:55.804711 run osmo-hlr_10.42.42.2(pid=11725): stdout: | (launched: 2022-12-09_02:24:52.269735) 02:24:55.856892 run osmo-hlr_10.42.42.2(pid=11725): stderr: | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209022452469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209022452484 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209022452492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209022452493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209022452493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:24:55.901265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11718): Terminating (SIGTERM) 02:24:55.943432 run iperf3-srv_10.42.42.10(pid=11719): Terminating (SIGTERM) 02:24:55.985419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11720): Terminating (SIGTERM) 02:24:56.026997 run iperf3-srv_10.42.42.10(pid=11721): Terminating (SIGTERM) 02:24:56.069006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11724): Terminating (SIGTERM) 02:24:56.111143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11727): Terminating (SIGTERM) 02:24:56.153082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11730): Terminating (SIGTERM) 02:24:56.162893 --- ParallelTerminationStrategy: PID 11718 died... 02:24:56.219294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11718): Terminated: ok {rc=0} 02:24:56.229240 --- ParallelTerminationStrategy: PID 11719 died... 02:24:56.284735 run iperf3-srv_10.42.42.10(pid=11719): Terminated {rc=256} 02:24:56.294690 --- ParallelTerminationStrategy: PID 11720 died... 02:24:56.351030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11720): Terminated: ok {rc=0} 02:24:56.360860 --- ParallelTerminationStrategy: PID 11721 died... 02:24:56.416494 run iperf3-srv_10.42.42.10(pid=11721): Terminated {rc=256} 02:24:56.426446 --- ParallelTerminationStrategy: PID 11724 died... 02:24:56.482327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11724): Terminated: ok {rc=0} 02:24:56.492269 --- ParallelTerminationStrategy: PID 11727 died... 02:24:56.547983 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11727): Terminated: ok {rc=0} 02:24:56.558053 --- ParallelTerminationStrategy: PID 11730 died... 02:24:56.614020 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11730): Terminated: ok {rc=0} 02:24:56.702142 bus /gobi_0: Setting Powered False 02:24:57.806154 bus /gobi_0: Setting Powered False 02:24:58.916612 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11728): Process ended prematurely: osmo-stp_10.42.42.5(pid=11728) [trial-2353↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11728)]