Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10874): Process ended prematurely: osmo-stp_10.42.42.5(pid=10874) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10874)]
Standard Output
---------------------------------------------- trial-2353 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:16:53.577416 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:53.589111 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:16:53.749765 tst cs_paging_gprs_active.py: using LAC 18372 02:16:53.881092 tst cs_paging_gprs_active.py: using RAC 12 02:16:54.013382 tst cs_paging_gprs_active.py: using CellId 18372 02:16:54.145055 tst cs_paging_gprs_active.py: using BVCI 18373 02:16:54.170729 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.182149 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.193640 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.204865 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.216286 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.227812 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.239588 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.251198 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:54.262819 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:54.391054 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:54.680897 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:16:54.811996 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:55.137550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10864): Launched 02:16:55.408118 run iperf3-srv_10.42.42.10(pid=10865): Launched 02:16:55.598671 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:16:55.728553 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:56.053927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10866): Launched 02:16:56.325309 run iperf3-srv_10.42.42.10(pid=10867): Launched 02:16:56.515233 tst cs_paging_gprs_active.py:38: start network... 02:16:56.645327 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:57.148048 run create_hlr_db(pid=10868): Launched 02:16:57.327706 bus /gobi_6: Setting Powered False 02:16:58.350086 run create_hlr_db(pid=10868): Terminated: ok {rc=0} 02:16:58.796083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10870): Launched 02:16:59.135132 run osmo-hlr_10.42.42.2(pid=10871): Launched 02:16:59.257383 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:59.841578 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10873): Launched 02:17:00.182493 run osmo-stp_10.42.42.5(pid=10874): Launched 02:17:00.306807 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:17:00.928544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10876): Launched 02:17:01.049583 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:17:01.350173 run patchelf(pid=10877): Launched 02:17:01.539532 run osmo-stp_10.42.42.5(pid=10874): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10874)] 02:17:01.690297 run osmo-stp_10.42.42.5(pid=10874): stdout: | (launched: 2022-12-09_02:17:00.012582) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:17:01.830920 run osmo-stp_10.42.42.5(pid=10874): stderr: | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021700211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:17:01.966102 run osmo-stp_10.42.42.5(pid=10874): stdout: | (launched: 2022-12-09_02:17:00.012582) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:17:02.117097 run osmo-stp_10.42.42.5(pid=10874): stderr: | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021700210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021700211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021700211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:17:02.268679 run patchelf(pid=10877): Terminating (SIGINT) 02:17:02.457888 run patchelf(pid=10877): Terminated: ok {rc=0} 02:17:02.492377 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10874): Process ended prematurely: osmo-stp_10.42.42.5(pid=10874) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10874)] [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:17:02.502695 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 02:17:02.568341 run osmo-hlr_10.42.42.2(pid=10871): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10871)] 02:17:02.621374 run osmo-hlr_10.42.42.2(pid=10871): stdout: | (launched: 2022-12-09_02:16:58.967446) 02:17:02.675320 run osmo-hlr_10.42.42.2(pid=10871): stderr: | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209021659171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209021659183 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209021659194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209021659194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209021659194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:17:02.720826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10864): Terminating (SIGTERM) 02:17:02.764665 run iperf3-srv_10.42.42.10(pid=10865): Terminating (SIGTERM) 02:17:02.807693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10866): Terminating (SIGTERM) 02:17:02.851053 run iperf3-srv_10.42.42.10(pid=10867): Terminating (SIGTERM) 02:17:02.894681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10870): Terminating (SIGTERM) 02:17:02.937496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10873): Terminating (SIGTERM) 02:17:02.981039 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10876): Terminating (SIGTERM) 02:17:02.990980 --- ParallelTerminationStrategy: PID 10864 died... 02:17:03.049261 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10864): Terminated: ok {rc=0} 02:17:03.059722 --- ParallelTerminationStrategy: PID 10865 died... 02:17:03.117316 run iperf3-srv_10.42.42.10(pid=10865): Terminated {rc=256} 02:17:03.127650 --- ParallelTerminationStrategy: PID 10866 died... 02:17:03.185060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10866): Terminated: ok {rc=0} 02:17:03.195360 --- ParallelTerminationStrategy: PID 10867 died... 02:17:03.253136 run iperf3-srv_10.42.42.10(pid=10867): Terminated {rc=256} 02:17:03.263486 --- ParallelTerminationStrategy: PID 10870 died... 02:17:03.321187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10870): Terminated: ok {rc=0} 02:17:03.331533 --- ParallelTerminationStrategy: PID 10873 died... 02:17:03.388683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10873): Terminated: ok {rc=0} 02:17:03.399030 --- ParallelTerminationStrategy: PID 10876 died... 02:17:03.456562 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10876): Terminated: ok {rc=0} 02:17:03.543957 bus /gobi_0: Setting Powered False 02:17:04.651939 bus /gobi_0: Setting Powered False 02:17:05.759924 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10874): Process ended prematurely: osmo-stp_10.42.42.5(pid=10874) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10874)]