Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10942): Process ended prematurely: osmo-stp_10.42.42.5(pid=10942) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10942)]
Standard Output
---------------------------------------------- trial-2353 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 02:17:44.975502 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:44.987508 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:17:45.133879 tst ping_idle_ping.py: using LAC 18376 02:17:45.257504 tst ping_idle_ping.py: using RAC 16 02:17:45.374712 tst ping_idle_ping.py: using CellId 18376 02:17:45.500418 tst ping_idle_ping.py: using BVCI 18377 02:17:45.525817 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.537627 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.549003 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.561407 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.573134 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.585090 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.597460 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:17:45.609453 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:17:45.908444 tst ping_idle_ping.py:24: start network... 02:17:46.035339 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:17:46.570470 run create_hlr_db(pid=10936): Launched 02:17:46.749253 bus /gobi_6: Setting Powered False 02:17:47.765995 run create_hlr_db(pid=10936): Terminated: ok {rc=0} 02:17:48.195515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10938): Launched 02:17:48.535672 run osmo-hlr_10.42.42.2(pid=10939): Launched 02:17:48.657256 run osmo-stp_10.42.42.5: Starting osmo-stp 02:17:49.212203 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10941): Launched 02:17:49.511800 run osmo-stp_10.42.42.5(pid=10942): Launched 02:17:49.620448 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:17:50.141070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10944): Launched 02:17:50.247539 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:17:50.507522 run patchelf(pid=10945): Launched 02:17:50.681920 run osmo-stp_10.42.42.5(pid=10942): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10942)] 02:17:50.810561 run osmo-stp_10.42.42.5(pid=10942): stdout: | (launched: 2022-12-09_02:17:49.364293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:17:50.938716 run osmo-stp_10.42.42.5(pid=10942): stderr: | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021749536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021749536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021749536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021749537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:17:51.062536 run osmo-stp_10.42.42.5(pid=10942): stdout: | (launched: 2022-12-09_02:17:49.364293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:17:51.185098 run osmo-stp_10.42.42.5(pid=10942): stderr: | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021749535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021749536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021749536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021749536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021749537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:17:51.327261 run patchelf(pid=10945): Terminating (SIGINT) 02:17:51.494201 run patchelf(pid=10945): Terminated: ok {rc=0} 02:17:51.524481 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10942): Process ended prematurely: osmo-stp_10.42.42.5(pid=10942) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10942)] [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 02:17:51.532884 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 02:17:51.592530 run osmo-hlr_10.42.42.2(pid=10939): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10939)] 02:17:51.641090 run osmo-hlr_10.42.42.2(pid=10939): stdout: | (launched: 2022-12-09_02:17:48.378063) 02:17:51.690361 run osmo-hlr_10.42.42.2(pid=10939): stderr: | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209021748580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209021748592 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209021748600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209021748600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209021748601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:17:51.732481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10938): Terminating (SIGTERM) 02:17:51.772190 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10941): Terminating (SIGTERM) 02:17:51.811875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10944): Terminating (SIGTERM) 02:17:51.821236 --- ParallelTerminationStrategy: PID 10938 died... 02:17:51.874491 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10938): Terminated: ok {rc=0} 02:17:51.884412 --- ParallelTerminationStrategy: PID 10941 died... 02:17:51.937955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10941): Terminated: ok {rc=0} 02:17:51.948047 --- ParallelTerminationStrategy: PID 10944 died... 02:17:52.001079 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10944): Terminated: ok {rc=0} 02:17:52.083811 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10942): Process ended prematurely: osmo-stp_10.42.42.5(pid=10942) [trial-2353↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10942)]