Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10735): Process ended prematurely: osmo-stp_10.42.42.5(pid=10735) [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10735)]
Standard Output
---------------------------------------------- trial-2353 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:14:51.462918 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:51.473848 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:14:51.600546 tst cs_paging_gprs_active.py: using LAC 18362 02:14:51.724316 tst cs_paging_gprs_active.py: using RAC 2 02:14:51.848611 tst cs_paging_gprs_active.py: using CellId 18362 02:14:51.973398 tst cs_paging_gprs_active.py: using BVCI 18363 02:14:51.997318 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.008184 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.018900 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.029754 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.040293 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.050951 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.061761 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.072354 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:52.083287 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:14:52.203566 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:14:52.491822 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:14:52.621793 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:14:52.946181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10725): Launched 02:14:53.217346 run iperf3-srv_10.42.42.10(pid=10726): Launched 02:14:53.410780 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:14:53.540640 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:14:53.865811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10727): Launched 02:14:54.137021 run iperf3-srv_10.42.42.10(pid=10728): Launched 02:14:54.327972 tst cs_paging_gprs_active.py:38: start network... 02:14:54.458041 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:14:54.961547 run create_hlr_db(pid=10729): Launched 02:14:55.142019 bus /gobi_6: Setting Powered False 02:14:56.162803 run create_hlr_db(pid=10729): Terminated: ok {rc=0} 02:14:56.608041 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10731): Launched 02:14:56.948536 run osmo-hlr_10.42.42.2(pid=10732): Launched 02:14:57.072155 run osmo-stp_10.42.42.5: Starting osmo-stp 02:14:57.654306 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10734): Launched 02:14:57.994228 run osmo-stp_10.42.42.5(pid=10735): Launched 02:14:58.115898 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:14:58.699038 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10737): Launched 02:14:58.818791 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:14:59.111566 run patchelf(pid=10738): Launched 02:14:59.305647 run osmo-stp_10.42.42.5(pid=10735): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10735)] 02:14:59.448218 run osmo-stp_10.42.42.5(pid=10735): stdout: | (launched: 2022-12-09_02:14:57.825050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:14:59.590623 run osmo-stp_10.42.42.5(pid=10735): stderr: | �[0;m�[38;5;43m20221209021458019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021458019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021458020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021458020 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021458020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021458021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021458021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:14:59.728496 run osmo-stp_10.42.42.5(pid=10735): stdout: | (launched: 2022-12-09_02:14:57.825050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:14:59.865354 run osmo-stp_10.42.42.5(pid=10735): stderr: | �[0;m�[38;5;43m20221209021458019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021458019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021458020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021458020 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021458020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021458021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021458021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:15:00.024932 run patchelf(pid=10738): Terminating (SIGINT) 02:15:00.211202 run patchelf(pid=10738): Terminated: ok {rc=0} 02:15:00.245200 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10735): Process ended prematurely: osmo-stp_10.42.42.5(pid=10735) [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10735)] [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:15:00.255107 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:15:00.319364 run osmo-hlr_10.42.42.2(pid=10732): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10732)] 02:15:00.371596 run osmo-hlr_10.42.42.2(pid=10732): stdout: | (launched: 2022-12-09_02:14:56.779080) 02:15:00.424266 run osmo-hlr_10.42.42.2(pid=10732): stderr: | �[0;m�[1;31m20221209021456980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209021456980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209021456981 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209021456981 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209021456981 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209021456981 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209021456992 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209021457001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209021457001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209021457001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:15:00.469144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10725): Terminating (SIGTERM) 02:15:00.511495 run iperf3-srv_10.42.42.10(pid=10726): Terminating (SIGTERM) 02:15:00.554443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10727): Terminating (SIGTERM) 02:15:00.596322 run iperf3-srv_10.42.42.10(pid=10728): Terminating (SIGTERM) 02:15:00.638837 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10731): Terminating (SIGTERM) 02:15:00.681528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10734): Terminating (SIGTERM) 02:15:00.723822 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10737): Terminating (SIGTERM) 02:15:00.733588 --- ParallelTerminationStrategy: PID 10725 died... 02:15:00.790580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10725): Terminated: ok {rc=0} 02:15:00.800628 --- ParallelTerminationStrategy: PID 10726 died... 02:15:00.857126 run iperf3-srv_10.42.42.10(pid=10726): Terminated {rc=256} 02:15:00.874595 --- ParallelTerminationStrategy: PID 10727 died... 02:15:00.937091 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10727): Terminated: ok {rc=0} 02:15:00.947428 --- ParallelTerminationStrategy: PID 10728 died... 02:15:01.004057 run iperf3-srv_10.42.42.10(pid=10728): Terminated {rc=256} 02:15:01.014631 --- ParallelTerminationStrategy: PID 10731 died... 02:15:01.071503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10731): Terminated: ok {rc=0} 02:15:01.081994 --- ParallelTerminationStrategy: PID 10734 died... 02:15:01.139259 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10734): Terminated: ok {rc=0} 02:15:01.149871 --- ParallelTerminationStrategy: PID 10737 died... 02:15:01.206974 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10737): Terminated: ok {rc=0} 02:15:01.296618 bus /gobi_0: Setting Powered False 02:15:02.403235 bus /gobi_0: Setting Powered False 02:15:03.513867 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10735): Process ended prematurely: osmo-stp_10.42.42.5(pid=10735) [trial-2353↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10735)]