Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14723): Process ended prematurely: osmo-stp_10.42.42.5(pid=14723) [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14723)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:48:30.028607 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.039703 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:48:30.178013 tst cs_paging_gprs_active.py: using LAC 18541 02:48:30.295498 tst cs_paging_gprs_active.py: using RAC 181 02:48:30.413956 tst cs_paging_gprs_active.py: using CellId 18541 02:48:30.531965 tst cs_paging_gprs_active.py: using BVCI 18542 02:48:30.555324 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.566488 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.577326 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.588660 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.599962 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.611284 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.622717 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.634060 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:48:30.645467 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:48:30.759355 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:48:31.076387 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:48:31.209878 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:31.541572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14713): Launched 02:48:31.811422 run iperf3-srv_10.42.42.10(pid=14714): Launched 02:48:31.998813 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:48:32.126675 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:32.439613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14715): Launched 02:48:32.697729 run iperf3-srv_10.42.42.10(pid=14716): Launched 02:48:32.880809 tst cs_paging_gprs_active.py:38: start network... 02:48:33.006499 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:48:33.478020 run create_hlr_db(pid=14717): Launched 02:48:33.651150 bus /gobi_6: Setting Powered False 02:48:34.673498 run create_hlr_db(pid=14717): Terminated: ok {rc=0} 02:48:35.101275 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14719): Launched 02:48:35.424386 run osmo-hlr_10.42.42.2(pid=14720): Launched 02:48:35.544910 run osmo-stp_10.42.42.5: Starting osmo-stp 02:48:36.103447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14722): Launched 02:48:36.425406 run osmo-stp_10.42.42.5(pid=14723): Launched 02:48:36.547058 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:48:37.106962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14725): Launched 02:48:37.222186 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:48:37.502463 run patchelf(pid=14726): Launched 02:48:37.690419 run osmo-stp_10.42.42.5(pid=14723): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14723)] 02:48:37.827153 run osmo-stp_10.42.42.5(pid=14723): stdout: | (launched: 2022-12-09_02:48:36.267386) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:37.964655 run osmo-stp_10.42.42.5(pid=14723): stderr: | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024836458 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:38.097673 run osmo-stp_10.42.42.5(pid=14723): stdout: | (launched: 2022-12-09_02:48:36.267386) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:38.229244 run osmo-stp_10.42.42.5(pid=14723): stderr: | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024836458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024836458 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024836459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:38.382705 run patchelf(pid=14726): Terminating (SIGINT) 02:48:38.562960 run patchelf(pid=14726): Terminated: ok {rc=0} 02:48:38.595891 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14723): Process ended prematurely: osmo-stp_10.42.42.5(pid=14723) [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14723)] [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:48:38.605655 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 02:48:38.667949 run osmo-hlr_10.42.42.2(pid=14720): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14720)] 02:48:38.718692 run osmo-hlr_10.42.42.2(pid=14720): stdout: | (launched: 2022-12-09_02:48:35.265515) 02:48:38.770072 run osmo-hlr_10.42.42.2(pid=14720): stderr: | �[0;m�[1;31m20221209024835463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209024835464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209024835464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209024835464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209024835464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209024835464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209024835476 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209024835488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209024835488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209024835488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:48:38.813830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14713): Terminating (SIGTERM) 02:48:38.855061 run iperf3-srv_10.42.42.10(pid=14714): Terminating (SIGTERM) 02:48:38.896363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14715): Terminating (SIGTERM) 02:48:38.937919 run iperf3-srv_10.42.42.10(pid=14716): Terminating (SIGTERM) 02:48:38.979503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14719): Terminating (SIGTERM) 02:48:39.021007 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14722): Terminating (SIGTERM) 02:48:39.062502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14725): Terminating (SIGTERM) 02:48:39.072215 --- ParallelTerminationStrategy: PID 14713 died... 02:48:39.127642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14713): Terminated: ok {rc=0} 02:48:39.137733 --- ParallelTerminationStrategy: PID 14714 died... 02:48:39.192520 run iperf3-srv_10.42.42.10(pid=14714): Terminated {rc=256} 02:48:39.202499 --- ParallelTerminationStrategy: PID 14715 died... 02:48:39.257791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14715): Terminated: ok {rc=0} 02:48:39.267761 --- ParallelTerminationStrategy: PID 14716 died... 02:48:39.322410 run iperf3-srv_10.42.42.10(pid=14716): Terminated {rc=256} 02:48:39.332340 --- ParallelTerminationStrategy: PID 14719 died... 02:48:39.387976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14719): Terminated: ok {rc=0} 02:48:39.398081 --- ParallelTerminationStrategy: PID 14722 died... 02:48:39.453023 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14722): Terminated: ok {rc=0} 02:48:39.462989 --- ParallelTerminationStrategy: PID 14725 died... 02:48:39.517998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14725): Terminated: ok {rc=0} 02:48:39.605112 bus /gobi_0: Setting Powered False 02:48:40.709001 bus /gobi_0: Setting Powered False 02:48:41.817722 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14723): Process ended prematurely: osmo-stp_10.42.42.5(pid=14723) [trial-2353↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14723)]