Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21469): Process ended prematurely: osmo-stp_10.42.42.5(pid=21469) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21469)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:00:26.110541 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.121978 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:00:26.286673 tst cs_paging_gprs_active.py: using LAC 18921 04:00:26.414039 tst cs_paging_gprs_active.py: using RAC 51 04:00:26.541515 tst cs_paging_gprs_active.py: using CellId 18921 04:00:26.668160 tst cs_paging_gprs_active.py: using BVCI 18922 04:00:26.692713 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.703966 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.715249 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.727088 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.738495 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.750018 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.761610 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.773110 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:26.784662 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:00:26.903831 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:00:27.198245 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:00:27.333509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:00:27.667902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21459): Launched 04:00:27.946235 run iperf3-srv_10.42.42.10(pid=21460): Launched 04:00:28.145066 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:00:28.280367 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:00:28.614949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21461): Launched 04:00:28.893865 run iperf3-srv_10.42.42.10(pid=21462): Launched 04:00:29.092214 tst cs_paging_gprs_active.py:38: start network... 04:00:29.227612 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:00:29.736795 run create_hlr_db(pid=21463): Launched 04:00:29.923873 bus /gobi_6: Setting Powered False 04:00:30.964554 run create_hlr_db(pid=21463): Terminated: ok {rc=0} 04:00:31.378120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21465): Launched 04:00:31.811479 run osmo-hlr_10.42.42.2(pid=21466): Launched 04:00:32.042099 run osmo-stp_10.42.42.5: Starting osmo-stp 04:00:32.681350 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21468): Launched 04:00:33.005401 run osmo-stp_10.42.42.5(pid=21469): Launched 04:00:33.123446 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:00:33.687602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21471): Launched 04:00:33.803510 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:00:34.086835 run patchelf(pid=21472): Launched 04:00:34.276725 run osmo-stp_10.42.42.5(pid=21469): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21469)] 04:00:34.415602 run osmo-stp_10.42.42.5(pid=21469): stdout: | (launched: 2022-12-09_04:00:32.845955) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:00:34.554577 run osmo-stp_10.42.42.5(pid=21469): stderr: | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040033038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:00:34.689233 run osmo-stp_10.42.42.5(pid=21469): stdout: | (launched: 2022-12-09_04:00:32.845955) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:00:34.822592 run osmo-stp_10.42.42.5(pid=21469): stderr: | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040033037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040033038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040033038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:00:34.978676 run patchelf(pid=21472): Terminating (SIGINT) 04:00:35.162395 run patchelf(pid=21472): Terminated: ok {rc=0} 04:00:35.196582 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21469): Process ended prematurely: osmo-stp_10.42.42.5(pid=21469) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21469)] [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:00:35.206899 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 04:00:35.272202 run osmo-hlr_10.42.42.2(pid=21466): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21466)] 04:00:35.324876 run osmo-hlr_10.42.42.2(pid=21466): stdout: | (launched: 2022-12-09_04:00:31.536052) 04:00:35.377927 run osmo-hlr_10.42.42.2(pid=21466): stderr: | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209040031900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209040031927 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209040031940 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209040031940 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209040031940 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:00:35.423165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21459): Terminating (SIGTERM) 04:00:35.465914 run iperf3-srv_10.42.42.10(pid=21460): Terminating (SIGTERM) 04:00:35.508387 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21461): Terminating (SIGTERM) 04:00:35.550520 run iperf3-srv_10.42.42.10(pid=21462): Terminating (SIGTERM) 04:00:35.593282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21465): Terminating (SIGTERM) 04:00:35.635546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21468): Terminating (SIGTERM) 04:00:35.678207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21471): Terminating (SIGTERM) 04:00:35.688249 --- ParallelTerminationStrategy: PID 21459 died... 04:00:35.745283 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21459): Terminated: ok {rc=0} 04:00:35.755430 --- ParallelTerminationStrategy: PID 21460 died... 04:00:35.811470 run iperf3-srv_10.42.42.10(pid=21460): Terminated {rc=256} 04:00:35.821923 --- ParallelTerminationStrategy: PID 21461 died... 04:00:35.878191 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21461): Terminated: ok {rc=0} 04:00:35.888544 --- ParallelTerminationStrategy: PID 21462 died... 04:00:35.944893 run iperf3-srv_10.42.42.10(pid=21462): Terminated {rc=256} 04:00:35.955072 --- ParallelTerminationStrategy: PID 21465 died... 04:00:36.011610 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21465): Terminated: ok {rc=0} 04:00:36.021822 --- ParallelTerminationStrategy: PID 21468 died... 04:00:36.078453 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21468): Terminated: ok {rc=0} 04:00:36.088792 --- ParallelTerminationStrategy: PID 21471 died... 04:00:36.145227 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21471): Terminated: ok {rc=0} 04:00:36.233768 bus /gobi_0: Setting Powered False 04:00:37.336620 bus /gobi_0: Setting Powered False 04:00:38.448598 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21469): Process ended prematurely: osmo-stp_10.42.42.5(pid=21469) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21469)]