Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26653): Process ended prematurely: osmo-stp_10.42.42.5(pid=26653) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26653)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 04:47:30.602836 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:30.614467 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:47:30.757462 tst cs_paging_gprs_active.py: using LAC 19172 04:47:30.897494 tst cs_paging_gprs_active.py: using RAC 47 04:47:31.033431 tst cs_paging_gprs_active.py: using CellId 19172 04:47:31.190115 tst cs_paging_gprs_active.py: using BVCI 19173 04:47:31.223269 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.239267 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.256360 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.272644 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.288722 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.305672 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.322502 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.339947 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:31.355731 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:31.497108 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:31.806777 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:47:31.944030 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:32.324621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26641): Launched 04:47:32.581843 run iperf3-srv_10.42.42.10(pid=26642): Launched 04:47:32.761448 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:47:32.883414 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:33.189529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26643): Launched 04:47:33.443721 run iperf3-srv_10.42.42.10(pid=26644): Launched 04:47:33.623083 tst cs_paging_gprs_active.py:38: start network... 04:47:33.745830 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:34.221573 run create_hlr_db(pid=26645): Launched 04:47:34.390869 bus /gobi_6: Setting Powered False 04:47:35.413938 run create_hlr_db(pid=26645): Terminated: ok {rc=0} 04:47:35.838365 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26647): Launched 04:47:36.133318 run osmo-hlr_10.42.42.2(pid=26650): Launched 04:47:36.247571 run osmo-stp_10.42.42.5: Starting osmo-stp 04:47:36.769081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26652): Launched 04:47:37.064742 run osmo-stp_10.42.42.5(pid=26653): Launched 04:47:37.171524 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:47:37.686926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26655): Launched 04:47:37.792116 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:47:38.051232 run patchelf(pid=26656): Launched 04:47:38.224289 run osmo-stp_10.42.42.5(pid=26653): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26653)] 04:47:38.350961 run osmo-stp_10.42.42.5(pid=26653): stdout: | (launched: 2022-12-09_04:47:36.919519) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:38.477744 run osmo-stp_10.42.42.5(pid=26653): stderr: | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044737091 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:38.600027 run osmo-stp_10.42.42.5(pid=26653): stdout: | (launched: 2022-12-09_04:47:36.919519) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:38.721630 run osmo-stp_10.42.42.5(pid=26653): stderr: | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044737091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044737091 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044737092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:38.863742 run patchelf(pid=26656): Terminating (SIGINT) 04:47:39.031012 run patchelf(pid=26656): Terminated: ok {rc=0} 04:47:39.061933 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26653): Process ended prematurely: osmo-stp_10.42.42.5(pid=26653) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26653)] [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 04:47:39.071075 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 04:47:39.131080 run osmo-hlr_10.42.42.2(pid=26650): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26650)] 04:47:39.180330 run osmo-hlr_10.42.42.2(pid=26650): stdout: | (launched: 2022-12-09_04:47:35.988004) 04:47:39.230136 run osmo-hlr_10.42.42.2(pid=26650): stderr: | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209044736162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209044736174 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209044736183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209044736184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209044736184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:47:39.272235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26641): Terminating (SIGTERM) 04:47:39.312006 run iperf3-srv_10.42.42.10(pid=26642): Terminating (SIGTERM) 04:47:39.351828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26643): Terminating (SIGTERM) 04:47:39.391463 run iperf3-srv_10.42.42.10(pid=26644): Terminating (SIGTERM) 04:47:39.431261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26647): Terminating (SIGTERM) 04:47:39.471039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26652): Terminating (SIGTERM) 04:47:39.510699 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26655): Terminating (SIGTERM) 04:47:39.519738 --- ParallelTerminationStrategy: PID 26641 died... 04:47:39.572982 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26641): Terminated: ok {rc=0} 04:47:39.582467 --- ParallelTerminationStrategy: PID 26642 died... 04:47:39.635805 run iperf3-srv_10.42.42.10(pid=26642): Terminated {rc=256} 04:47:39.645283 --- ParallelTerminationStrategy: PID 26643 died... 04:47:39.698384 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26643): Terminated: ok {rc=0} 04:47:39.707841 --- ParallelTerminationStrategy: PID 26644 died... 04:47:39.760847 run iperf3-srv_10.42.42.10(pid=26644): Terminated {rc=256} 04:47:39.770399 --- ParallelTerminationStrategy: PID 26647 died... 04:47:39.823832 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26647): Terminated: ok {rc=0} 04:47:39.833341 --- ParallelTerminationStrategy: PID 26652 died... 04:47:39.886150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26652): Terminated: ok {rc=0} 04:47:39.895588 --- ParallelTerminationStrategy: PID 26655 died... 04:47:39.949107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26655): Terminated: ok {rc=0} 04:47:40.038649 bus /gobi_0: Setting Powered False 04:47:41.142371 bus /gobi_0: Setting Powered False 04:47:42.253823 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26653): Process ended prematurely: osmo-stp_10.42.42.5(pid=26653) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26653)]