Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20590): Process ended prematurely: osmo-stp_10.42.42.5(pid=20590) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20590)]
Standard Output
---------------------------------------------- trial-2354 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:51:50.991003 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.001622 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:51:51.147149 tst cs_paging_gprs_active.py: using LAC 18875 03:51:51.277765 tst cs_paging_gprs_active.py: using RAC 5 03:51:51.401997 tst cs_paging_gprs_active.py: using CellId 18875 03:51:51.526397 tst cs_paging_gprs_active.py: using BVCI 18876 03:51:51.551136 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.562517 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.573685 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.584873 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.596015 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.607197 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.618532 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.629682 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:51.640941 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:51.757652 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:52.051085 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:51:52.185334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:52.515971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20580): Launched 03:51:52.791232 run iperf3-srv_10.42.42.10(pid=20581): Launched 03:51:52.987409 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:51:53.121663 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:53.452008 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20582): Launched 03:51:53.727166 run iperf3-srv_10.42.42.10(pid=20583): Launched 03:51:53.923901 tst cs_paging_gprs_active.py:38: start network... 03:51:54.057761 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:51:54.561747 run create_hlr_db(pid=20584): Launched 03:51:54.747534 bus /gobi_6: Setting Powered False 03:51:55.768482 run create_hlr_db(pid=20584): Terminated: ok {rc=0} 03:51:56.170733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20586): Launched 03:51:56.470987 run osmo-hlr_10.42.42.2(pid=20587): Launched 03:51:56.582662 run osmo-stp_10.42.42.5: Starting osmo-stp 03:51:57.101907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20589): Launched 03:51:57.401540 run osmo-stp_10.42.42.5(pid=20590): Launched 03:51:57.510921 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:51:58.031220 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20592): Launched 03:51:58.137702 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:51:58.397812 run patchelf(pid=20593): Launched 03:51:58.572725 run osmo-stp_10.42.42.5(pid=20590): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20590)] 03:51:58.700830 run osmo-stp_10.42.42.5(pid=20590): stdout: | (launched: 2022-12-09_03:51:57.253838) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:58.829321 run osmo-stp_10.42.42.5(pid=20590): stderr: | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035157423 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:58.953169 run osmo-stp_10.42.42.5(pid=20590): stdout: | (launched: 2022-12-09_03:51:57.253838) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:59.075717 run osmo-stp_10.42.42.5(pid=20590): stderr: | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035157422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035157423 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035157423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:59.219208 run patchelf(pid=20593): Terminating (SIGINT) 03:51:59.388039 run patchelf(pid=20593): Terminated: ok {rc=0} 03:51:59.419204 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20590): Process ended prematurely: osmo-stp_10.42.42.5(pid=20590) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20590)] [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:51:59.428282 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 03:51:59.488369 run osmo-hlr_10.42.42.2(pid=20587): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20587)] 03:51:59.537623 run osmo-hlr_10.42.42.2(pid=20587): stdout: | (launched: 2022-12-09_03:51:56.323679) 03:51:59.587874 run osmo-hlr_10.42.42.2(pid=20587): stderr: | �[0;m�[1;31m20221209035156496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035156496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035156496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035156497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035156497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035156497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035156509 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035156518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035156518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035156518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:51:59.629840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20580): Terminating (SIGTERM) 03:51:59.669114 run iperf3-srv_10.42.42.10(pid=20581): Terminating (SIGTERM) 03:51:59.708369 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20582): Terminating (SIGTERM) 03:51:59.747612 run iperf3-srv_10.42.42.10(pid=20583): Terminating (SIGTERM) 03:51:59.787002 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20586): Terminating (SIGTERM) 03:51:59.826374 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20589): Terminating (SIGTERM) 03:51:59.865636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20592): Terminating (SIGTERM) 03:51:59.874595 --- ParallelTerminationStrategy: PID 20580 died... 03:51:59.927242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20580): Terminated: ok {rc=0} 03:51:59.936579 --- ParallelTerminationStrategy: PID 20581 died... 03:51:59.989188 run iperf3-srv_10.42.42.10(pid=20581): Terminated {rc=256} 03:51:59.998449 --- ParallelTerminationStrategy: PID 20582 died... 03:52:00.050753 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20582): Terminated: ok {rc=0} 03:52:00.060088 --- ParallelTerminationStrategy: PID 20583 died... 03:52:00.112320 run iperf3-srv_10.42.42.10(pid=20583): Terminated {rc=256} 03:52:00.121706 --- ParallelTerminationStrategy: PID 20586 died... 03:52:00.174646 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20586): Terminated: ok {rc=0} 03:52:00.184000 --- ParallelTerminationStrategy: PID 20589 died... 03:52:00.236295 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20589): Terminated: ok {rc=0} 03:52:00.245780 --- ParallelTerminationStrategy: PID 20592 died... 03:52:00.298227 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20592): Terminated: ok {rc=0} 03:52:00.386957 bus /gobi_0: Setting Powered False 03:52:01.508421 bus /gobi_0: Setting Powered False 03:52:02.617380 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20590): Process ended prematurely: osmo-stp_10.42.42.5(pid=20590) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20590)]