Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=20381): Process ended prematurely: osmo-stp_10.42.42.5(pid=20381) [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20381)]
Standard Output
---------------------------------------------- trial-2354 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 03:48:52.589786 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:52.600191 tst gprs:oc2g: Using 1 x bts (candidates: 1) 03:48:52.721340 tst cs_paging_gprs_active.py: using LAC 18860 03:48:52.841563 tst cs_paging_gprs_active.py: using RAC 245 03:48:52.958705 tst cs_paging_gprs_active.py: using CellId 18860 03:48:53.076235 tst cs_paging_gprs_active.py: using BVCI 18861 03:48:53.099924 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.110495 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.120821 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.131731 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.142507 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.153300 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.164018 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.174890 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 03:48:53.185818 tst gprs:oc2g: Using 1 x modem (candidates: 4) 03:48:53.300133 tst gprs:oc2g: Using 1 x modem (candidates: 4) 03:48:53.594222 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:48:53.730843 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:48:54.066183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20371): Launched 03:48:54.345935 run iperf3-srv_10.42.42.10(pid=20372): Launched 03:48:54.544573 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:48:54.680504 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:48:55.016048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Launched 03:48:55.295430 run iperf3-srv_10.42.42.10(pid=20374): Launched 03:48:55.494920 tst cs_paging_gprs_active.py:38: start network... 03:48:55.630893 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:48:56.140809 run create_hlr_db(pid=20375): Launched 03:48:56.328360 bus /sierra_2: Setting Powered False 03:48:57.338436 run create_hlr_db(pid=20375): Terminated: ok {rc=0} 03:48:57.775689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20377): Launched 03:48:58.100609 run osmo-hlr_10.42.42.2(pid=20378): Launched 03:48:58.220531 run osmo-stp_10.42.42.5: Starting osmo-stp 03:48:58.783094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20380): Launched 03:48:59.106611 run osmo-stp_10.42.42.5(pid=20381): Launched 03:48:59.224855 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:48:59.789819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20383): Launched 03:48:59.905820 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:49:00.188232 run patchelf(pid=20384): Launched 03:49:00.377429 run osmo-stp_10.42.42.5(pid=20381): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20381)] 03:49:00.515706 run osmo-stp_10.42.42.5(pid=20381): stdout: | (launched: 2022-12-09_03:48:58.947735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:49:00.654619 run osmo-stp_10.42.42.5(pid=20381): stderr: | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034859140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:49:00.789327 run osmo-stp_10.42.42.5(pid=20381): stdout: | (launched: 2022-12-09_03:48:58.947735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:49:00.944500 run osmo-stp_10.42.42.5(pid=20381): stderr: | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034859139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034859140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034859140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:49:01.096598 run patchelf(pid=20384): Terminating (SIGINT) 03:49:01.273469 run patchelf(pid=20384): Terminated: ok {rc=0} 03:49:01.306407 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20381): Process ended prematurely: osmo-stp_10.42.42.5(pid=20381) [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20381)] [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py:38] 03:49:01.316286 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:49:01.381456 run osmo-hlr_10.42.42.2(pid=20378): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20378)] 03:49:01.433533 run osmo-hlr_10.42.42.2(pid=20378): stdout: | (launched: 2022-12-09_03:48:57.940625) 03:49:01.486134 run osmo-hlr_10.42.42.2(pid=20378): stderr: | �[0;m�[1;31m20221209034858138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209034858138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209034858138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209034858138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209034858139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209034858139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209034858151 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209034858159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209034858160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209034858160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:49:01.531197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20371): Terminating (SIGTERM) 03:49:01.577117 run iperf3-srv_10.42.42.10(pid=20372): Terminating (SIGTERM) 03:49:01.621525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Terminating (SIGTERM) 03:49:01.665473 run iperf3-srv_10.42.42.10(pid=20374): Terminating (SIGTERM) 03:49:01.710176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20377): Terminating (SIGTERM) 03:49:01.753061 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20380): Terminating (SIGTERM) 03:49:01.799358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20383): Terminating (SIGTERM) 03:49:01.809749 --- ParallelTerminationStrategy: PID 20371 died... 03:49:01.866974 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20371): Terminated: ok {rc=0} 03:49:01.877868 --- ParallelTerminationStrategy: PID 20372 died... 03:49:01.933434 run iperf3-srv_10.42.42.10(pid=20372): Terminated {rc=256} 03:49:01.943858 --- ParallelTerminationStrategy: PID 20373 died... 03:49:02.000226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Terminated: ok {rc=0} 03:49:02.010879 --- ParallelTerminationStrategy: PID 20374 died... 03:49:02.067313 run iperf3-srv_10.42.42.10(pid=20374): Terminated {rc=256} 03:49:02.077561 --- ParallelTerminationStrategy: PID 20377 died... 03:49:02.133890 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20377): Terminated: ok {rc=0} 03:49:02.144467 --- ParallelTerminationStrategy: PID 20380 died... 03:49:02.200759 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20380): Terminated: ok {rc=0} 03:49:02.210954 --- ParallelTerminationStrategy: PID 20383 died... 03:49:02.264816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20383): Terminated: ok {rc=0} 03:49:02.354211 bus /gobi_0: Setting Powered False 03:49:03.460263 bus /gobi_0: Setting Powered False 03:49:04.568163 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20381): Process ended prematurely: osmo-stp_10.42.42.5(pid=20381) [trial-2354↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20381)]