Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20022): Process ended prematurely: osmo-stp_10.42.42.5(pid=20022) [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20022)]
Standard Output
---------------------------------------------- trial-2354 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 03:43:52.607863 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:52.619254 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:43:52.764787 tst ping_idle_ping.py: using LAC 18832 03:43:52.885449 tst ping_idle_ping.py: using RAC 217 03:43:53.004494 tst ping_idle_ping.py: using CellId 18832 03:43:53.125293 tst ping_idle_ping.py: using BVCI 18833 03:43:53.148701 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.159688 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.170289 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.180881 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.191464 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.201994 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.212684 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:53.223312 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:43:53.500408 tst ping_idle_ping.py:24: start network... 03:43:53.626420 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:43:54.118259 run create_hlr_db(pid=20016): Launched 03:43:54.292803 bus /gobi_6: Setting Powered False 03:43:55.315050 run create_hlr_db(pid=20016): Terminated: ok {rc=0} 03:43:55.754202 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20018): Launched 03:43:56.084687 run osmo-hlr_10.42.42.2(pid=20019): Launched 03:43:56.207695 run osmo-stp_10.42.42.5: Starting osmo-stp 03:43:56.780534 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20021): Launched 03:43:57.108868 run osmo-stp_10.42.42.5(pid=20022): Launched 03:43:57.228332 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:43:57.801499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20024): Launched 03:43:57.918482 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:43:58.205149 run patchelf(pid=20025): Launched 03:43:58.395872 run osmo-stp_10.42.42.5(pid=20022): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20022)] 03:43:58.535461 run osmo-stp_10.42.42.5(pid=20022): stdout: | (launched: 2022-12-09_03:43:56.946819) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:58.675920 run osmo-stp_10.42.42.5(pid=20022): stderr: | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034357142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:58.811346 run osmo-stp_10.42.42.5(pid=20022): stdout: | (launched: 2022-12-09_03:43:56.946819) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:58.946184 run osmo-stp_10.42.42.5(pid=20022): stderr: | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034357141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034357142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034357142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:59.102562 run patchelf(pid=20025): Terminating (SIGINT) 03:43:59.285953 run patchelf(pid=20025): Terminated: ok {rc=0} 03:43:59.319206 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20022): Process ended prematurely: osmo-stp_10.42.42.5(pid=20022) [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20022)] [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 03:43:59.328595 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 03:43:59.393616 run osmo-hlr_10.42.42.2(pid=20019): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20019)] 03:43:59.446239 run osmo-hlr_10.42.42.2(pid=20019): stdout: | (launched: 2022-12-09_03:43:55.921159) 03:43:59.499532 run osmo-hlr_10.42.42.2(pid=20019): stderr: | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209034356120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209034356132 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209034356141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209034356141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209034356141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:43:59.544912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20018): Terminating (SIGTERM) 03:43:59.588490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20021): Terminating (SIGTERM) 03:43:59.631722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20024): Terminating (SIGTERM) 03:43:59.641626 --- ParallelTerminationStrategy: PID 20018 died... 03:43:59.698719 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20018): Terminated: ok {rc=0} 03:43:59.709274 --- ParallelTerminationStrategy: PID 20021 died... 03:43:59.766668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20021): Terminated: ok {rc=0} 03:43:59.776866 --- ParallelTerminationStrategy: PID 20024 died... 03:43:59.833990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20024): Terminated: ok {rc=0} 03:43:59.923740 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20022): Process ended prematurely: osmo-stp_10.42.42.5(pid=20022) [trial-2354↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20022)]