Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21398): Process ended prematurely: osmo-stp_10.42.42.5(pid=21398) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21398)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:59:27.049588 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.060238 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:59:27.217880 tst cs_paging_gprs_active.py: using LAC 18916 03:59:27.336480 tst cs_paging_gprs_active.py: using RAC 46 03:59:27.457589 tst cs_paging_gprs_active.py: using CellId 18916 03:59:27.577091 tst cs_paging_gprs_active.py: using BVCI 18917 03:59:27.600156 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.611012 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.621673 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.632273 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.642915 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.653671 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.664276 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.674798 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:27.685524 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:59:27.805658 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:59:28.086619 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:59:28.213202 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:28.528421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21388): Launched 03:59:28.790473 run iperf3-srv_10.42.42.10(pid=21389): Launched 03:59:28.975368 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:59:29.102050 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:29.416028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21390): Launched 03:59:29.677772 run iperf3-srv_10.42.42.10(pid=21391): Launched 03:59:29.862483 tst cs_paging_gprs_active.py:38: start network... 03:59:29.988799 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:59:30.476688 run create_hlr_db(pid=21392): Launched 03:59:30.650656 bus /gobi_6: Setting Powered False 03:59:31.673495 run create_hlr_db(pid=21392): Terminated: ok {rc=0} 03:59:32.121579 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21394): Launched 03:59:32.427471 run osmo-hlr_10.42.42.2(pid=21395): Launched 03:59:32.538986 run osmo-stp_10.42.42.5: Starting osmo-stp 03:59:33.066384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21397): Launched 03:59:33.370547 run osmo-stp_10.42.42.5(pid=21398): Launched 03:59:33.480838 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:59:34.009939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21400): Launched 03:59:34.118217 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:59:34.383045 run patchelf(pid=21401): Launched 03:59:34.560590 run osmo-stp_10.42.42.5(pid=21398): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21398)] 03:59:34.691070 run osmo-stp_10.42.42.5(pid=21398): stdout: | (launched: 2022-12-09_03:59:33.221310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:34.821223 run osmo-stp_10.42.42.5(pid=21398): stderr: | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035933394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:34.947020 run osmo-stp_10.42.42.5(pid=21398): stdout: | (launched: 2022-12-09_03:59:33.221310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:35.071728 run osmo-stp_10.42.42.5(pid=21398): stderr: | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035933394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035933394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035933395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:35.218081 run patchelf(pid=21401): Terminating (SIGINT) 03:59:35.389659 run patchelf(pid=21401): Terminated: ok {rc=0} 03:59:35.421155 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21398): Process ended prematurely: osmo-stp_10.42.42.5(pid=21398) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21398)] [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:59:35.430431 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 03:59:35.490949 run osmo-hlr_10.42.42.2(pid=21395): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21395)] 03:59:35.540529 run osmo-hlr_10.42.42.2(pid=21395): stdout: | (launched: 2022-12-09_03:59:32.277123) 03:59:35.590704 run osmo-hlr_10.42.42.2(pid=21395): stderr: | �[0;m�[1;31m20221209035932454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035932454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035932455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035932455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035932455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035932455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035932467 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035932475 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035932476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035932476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:59:35.633600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21388): Terminating (SIGTERM) 03:59:35.673608 run iperf3-srv_10.42.42.10(pid=21389): Terminating (SIGTERM) 03:59:35.713665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21390): Terminating (SIGTERM) 03:59:35.753689 run iperf3-srv_10.42.42.10(pid=21391): Terminating (SIGTERM) 03:59:35.793751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21394): Terminating (SIGTERM) 03:59:35.833860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21397): Terminating (SIGTERM) 03:59:35.873784 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21400): Terminating (SIGTERM) 03:59:35.882943 --- ParallelTerminationStrategy: PID 21388 died... 03:59:35.936524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21388): Terminated: ok {rc=0} 03:59:35.946157 --- ParallelTerminationStrategy: PID 21389 died... 03:59:35.999669 run iperf3-srv_10.42.42.10(pid=21389): Terminated {rc=256} 03:59:36.009302 --- ParallelTerminationStrategy: PID 21390 died... 03:59:36.062908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21390): Terminated: ok {rc=0} 03:59:36.072438 --- ParallelTerminationStrategy: PID 21391 died... 03:59:36.125774 run iperf3-srv_10.42.42.10(pid=21391): Terminated {rc=256} 03:59:36.135372 --- ParallelTerminationStrategy: PID 21394 died... 03:59:36.188568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21394): Terminated: ok {rc=0} 03:59:36.198115 --- ParallelTerminationStrategy: PID 21397 died... 03:59:36.251945 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21397): Terminated: ok {rc=0} 03:59:36.261611 --- ParallelTerminationStrategy: PID 21400 died... 03:59:36.315250 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21400): Terminated: ok {rc=0} 03:59:36.405287 bus /gobi_0: Setting Powered False 03:59:37.510932 bus /gobi_0: Setting Powered False 03:59:38.623813 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21398): Process ended prematurely: osmo-stp_10.42.42.5(pid=21398) [trial-2354↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21398)]