Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=21886): Process ended prematurely: osmo-stp_10.42.42.5(pid=21886) [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21886)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 04:06:17.411192 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:17.422527 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 04:06:17.573296 tst cs_paging_gprs_active.py: using LAC 18953 04:06:17.698733 tst cs_paging_gprs_active.py: using RAC 83 04:06:17.829233 tst cs_paging_gprs_active.py: using CellId 18953 04:06:17.959274 tst cs_paging_gprs_active.py: using BVCI 18954 04:06:17.984110 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:17.995346 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.006327 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.018156 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.028929 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.039958 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.051039 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.063534 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 04:06:18.075562 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 04:06:18.197049 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 04:06:18.494383 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:06:18.629679 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:06:18.963528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21876): Launched 04:06:19.241742 run iperf3-srv_10.42.42.10(pid=21877): Launched 04:06:19.439542 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:06:19.574725 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:06:19.909116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21878): Launched 04:06:20.187287 run iperf3-srv_10.42.42.10(pid=21879): Launched 04:06:20.385747 tst cs_paging_gprs_active.py:38: start network... 04:06:20.521166 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:06:21.029421 run create_hlr_db(pid=21880): Launched 04:06:21.216224 bus /sierra_2: Setting Powered False 04:06:22.237583 run create_hlr_db(pid=21880): Terminated: ok {rc=0} 04:06:22.667706 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21882): Launched 04:06:22.991634 run osmo-hlr_10.42.42.2(pid=21883): Launched 04:06:23.111176 run osmo-stp_10.42.42.5: Starting osmo-stp 04:06:23.672907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21885): Launched 04:06:23.996398 run osmo-stp_10.42.42.5(pid=21886): Launched 04:06:24.114096 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:06:24.677851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21888): Launched 04:06:24.793309 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:06:25.075297 run patchelf(pid=21889): Launched 04:06:25.265347 run osmo-stp_10.42.42.5(pid=21886): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21886)] 04:06:25.403514 run osmo-stp_10.42.42.5(pid=21886): stdout: | (launched: 2022-12-09_04:06:23.837307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:06:25.542253 run osmo-stp_10.42.42.5(pid=21886): stderr: | �[0;m�[38;5;43m20221209040624030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040624030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040624031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040624031 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:06:25.676061 run osmo-stp_10.42.42.5(pid=21886): stdout: | (launched: 2022-12-09_04:06:23.837307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:06:25.808897 run osmo-stp_10.42.42.5(pid=21886): stderr: | �[0;m�[38;5;43m20221209040624030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040624030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040624031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040624031 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040624031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:06:25.964250 run patchelf(pid=21889): Terminating (SIGINT) 04:06:26.146495 run patchelf(pid=21889): Terminated: ok {rc=0} 04:06:26.180015 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21886): Process ended prematurely: osmo-stp_10.42.42.5(pid=21886) [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21886)] [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 04:06:26.189958 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 04:06:26.254551 run osmo-hlr_10.42.42.2(pid=21883): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21883)] 04:06:26.306940 run osmo-hlr_10.42.42.2(pid=21883): stdout: | (launched: 2022-12-09_04:06:22.832349) 04:06:26.359702 run osmo-hlr_10.42.42.2(pid=21883): stderr: | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209040623029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209040623042 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209040623051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209040623051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209040623051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:06:26.404572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21876): Terminating (SIGTERM) 04:06:26.447231 run iperf3-srv_10.42.42.10(pid=21877): Terminating (SIGTERM) 04:06:26.489856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21878): Terminating (SIGTERM) 04:06:26.532456 run iperf3-srv_10.42.42.10(pid=21879): Terminating (SIGTERM) 04:06:26.574776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21882): Terminating (SIGTERM) 04:06:26.617288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21885): Terminating (SIGTERM) 04:06:26.659762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21888): Terminating (SIGTERM) 04:06:26.669897 --- ParallelTerminationStrategy: PID 21876 died... 04:06:26.726460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21876): Terminated: ok {rc=0} 04:06:26.736574 --- ParallelTerminationStrategy: PID 21877 died... 04:06:26.792747 run iperf3-srv_10.42.42.10(pid=21877): Terminated {rc=256} 04:06:26.802744 --- ParallelTerminationStrategy: PID 21878 died... 04:06:26.859099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21878): Terminated: ok {rc=0} 04:06:26.869222 --- ParallelTerminationStrategy: PID 21879 died... 04:06:26.925046 run iperf3-srv_10.42.42.10(pid=21879): Terminated {rc=256} 04:06:26.935328 --- ParallelTerminationStrategy: PID 21882 died... 04:06:26.991729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21882): Terminated: ok {rc=0} 04:06:27.001834 --- ParallelTerminationStrategy: PID 21885 died... 04:06:27.058248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21885): Terminated: ok {rc=0} 04:06:27.068618 --- ParallelTerminationStrategy: PID 21888 died... 04:06:27.124990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21888): Terminated: ok {rc=0} 04:06:27.213251 bus /gobi_0: Setting Powered False 04:06:28.319892 bus /gobi_0: Setting Powered False 04:06:29.432302 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21886): Process ended prematurely: osmo-stp_10.42.42.5(pid=21886) [trial-2354↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21886)]