Failed
dynts:trx-umtrx+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=901): Process ended prematurely: osmo-stp_10.42.42.5(pid=901) [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=901)]
Standard Output
---------------------------------------------- trial-2355 dynts:trx-umtrx+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 06:12:50.230988 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.242131 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 06:12:50.403955 tst switch_tch_pdch.py: using LAC 19484 06:12:50.522559 tst switch_tch_pdch.py: using RAC 104 06:12:50.641696 tst switch_tch_pdch.py: using CellId 19484 06:12:50.757483 tst switch_tch_pdch.py: using BVCI 19485 06:12:50.779685 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.790695 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.801488 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.812750 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.823932 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.835285 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.846725 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:50.858206 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 06:12:50.974094 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 06:12:51.241779 tst switch_tch_pdch.py:51: start network... 06:12:51.361848 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:12:51.791339 run create_hlr_db(pid=895): Launched 06:12:51.909974 bus /gobi_6: Setting Powered False 06:12:52.989947 run create_hlr_db(pid=895): Terminated: ok {rc=0} 06:12:53.376187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=897): Launched 06:12:53.684349 run osmo-hlr_10.42.42.2(pid=898): Launched 06:12:53.798043 run osmo-stp_10.42.42.5: Starting osmo-stp 06:12:54.308122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=900): Launched 06:12:54.616077 run osmo-stp_10.42.42.5(pid=901): Launched 06:12:54.728717 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:12:55.241337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=903): Launched 06:12:55.351616 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:12:55.620533 run patchelf(pid=904): Launched 06:12:55.803178 run osmo-stp_10.42.42.5(pid=901): ERR: Terminated: ERROR {rc=1} [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=901)] 06:12:55.936414 run osmo-stp_10.42.42.5(pid=901): stdout: | (launched: 2022-12-09_06:12:54.465611) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:12:56.070175 run osmo-stp_10.42.42.5(pid=901): stderr: | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061254654 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:12:56.198666 run osmo-stp_10.42.42.5(pid=901): stdout: | (launched: 2022-12-09_06:12:54.465611) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:12:56.326889 run osmo-stp_10.42.42.5(pid=901): stderr: | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061254653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061254654 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061254656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:12:56.475041 run patchelf(pid=904): Terminating (SIGINT) 06:12:56.649315 run patchelf(pid=904): Terminated: ok {rc=0} 06:12:56.681397 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=901): Process ended prematurely: osmo-stp_10.42.42.5(pid=901) [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=901)] [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 06:12:56.690536 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 06:12:56.753232 run osmo-hlr_10.42.42.2(pid=898): ERR: Terminated: ERROR {rc=237} [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=898)] 06:12:56.804866 run osmo-hlr_10.42.42.2(pid=898): stdout: | (launched: 2022-12-09_06:12:53.533172) 06:12:56.857127 run osmo-hlr_10.42.42.2(pid=898): stderr: | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061253727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061253739 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/dynts:trx-umtrx+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061253748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061253748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061253748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:12:56.901744 run pcap-recorder_any(filters='host 10.42.42.2')(pid=897): Terminating (SIGTERM) 06:12:56.943903 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=900): Terminating (SIGTERM) 06:12:56.986179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=903): Terminating (SIGTERM) 06:12:56.995949 --- ParallelTerminationStrategy: PID 897 died... 06:12:57.052080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=897): Terminated: ok {rc=0} 06:12:57.062201 --- ParallelTerminationStrategy: PID 900 died... 06:12:57.118119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=900): Terminated: ok {rc=0} 06:12:57.128263 --- ParallelTerminationStrategy: PID 903 died... 06:12:57.184069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=903): Terminated: ok {rc=0} 06:12:57.271159 bus /gobi_0: Setting Powered False 06:12:58.375252 bus /gobi_0: Setting Powered False 06:12:59.486770 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=901): Process ended prematurely: osmo-stp_10.42.42.5(pid=901) [trial-2355↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=901)]