Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=3479): Process ended prematurely: osmo-stp_10.42.42.5(pid=3479) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3479)]
Standard Output
---------------------------------------------- trial-2355 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 06:40:29.895166 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:29.906321 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:40:30.042769 tst cs_paging_gprs_active.py: using LAC 19633 06:40:30.165147 tst cs_paging_gprs_active.py: using RAC 253 06:40:30.280353 tst cs_paging_gprs_active.py: using CellId 19633 06:40:30.397704 tst cs_paging_gprs_active.py: using BVCI 19634 06:40:30.420283 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.431465 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.442492 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.453718 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.464882 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.476013 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.487290 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.498634 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:30.510163 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:30.627101 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:30.928300 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:40:31.068641 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:31.453529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3469): Launched 06:40:31.751288 run iperf3-srv_10.42.42.10(pid=3470): Launched 06:40:31.950939 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:40:32.087079 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:32.419357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3471): Launched 06:40:32.693602 run iperf3-srv_10.42.42.10(pid=3472): Launched 06:40:32.888928 tst cs_paging_gprs_active.py:38: start network... 06:40:33.022113 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:40:33.536409 run create_hlr_db(pid=3473): Launched 06:40:33.721613 bus /gobi_6: Setting Powered False 06:40:34.743161 run create_hlr_db(pid=3473): Terminated: ok {rc=0} 06:40:35.168306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3475): Launched 06:40:35.486727 run osmo-hlr_10.42.42.2(pid=3476): Launched 06:40:35.606789 run osmo-stp_10.42.42.5: Starting osmo-stp 06:40:36.163691 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3478): Launched 06:40:36.482798 run osmo-stp_10.42.42.5(pid=3479): Launched 06:40:36.599445 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:40:37.155610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3481): Launched 06:40:37.270254 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:40:37.547300 run patchelf(pid=3482): Launched 06:40:37.734663 run osmo-stp_10.42.42.5(pid=3479): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3479)] 06:40:37.872523 run osmo-stp_10.42.42.5(pid=3479): stdout: | (launched: 2022-12-09_06:40:36.326744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:38.010103 run osmo-stp_10.42.42.5(pid=3479): stderr: | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209064036519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:38.143120 run osmo-stp_10.42.42.5(pid=3479): stdout: | (launched: 2022-12-09_06:40:36.326744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:38.275518 run osmo-stp_10.42.42.5(pid=3479): stderr: | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209064036518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209064036519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209064036519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:38.428466 run patchelf(pid=3482): Terminating (SIGINT) 06:40:38.608111 run patchelf(pid=3482): Terminated: ok {rc=0} 06:40:38.641172 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3479): Process ended prematurely: osmo-stp_10.42.42.5(pid=3479) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3479)] [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 06:40:38.650862 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 06:40:38.713489 run osmo-hlr_10.42.42.2(pid=3476): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3476)] 06:40:38.764740 run osmo-hlr_10.42.42.2(pid=3476): stdout: | (launched: 2022-12-09_06:40:35.331014) 06:40:38.817069 run osmo-hlr_10.42.42.2(pid=3476): stderr: | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209064035529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209064035541 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209064035549 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209064035550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209064035550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:40:38.861589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3469): Terminating (SIGTERM) 06:40:38.903645 run iperf3-srv_10.42.42.10(pid=3470): Terminating (SIGTERM) 06:40:38.946025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3471): Terminating (SIGTERM) 06:40:38.988189 run iperf3-srv_10.42.42.10(pid=3472): Terminating (SIGTERM) 06:40:39.030705 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3475): Terminating (SIGTERM) 06:40:39.073140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3478): Terminating (SIGTERM) 06:40:39.115281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3481): Terminating (SIGTERM) 06:40:39.124896 --- ParallelTerminationStrategy: PID 3469 died... 06:40:39.180872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3469): Terminated: ok {rc=0} 06:40:39.190983 --- ParallelTerminationStrategy: PID 3470 died... 06:40:39.246617 run iperf3-srv_10.42.42.10(pid=3470): Terminated {rc=256} 06:40:39.256414 --- ParallelTerminationStrategy: PID 3471 died... 06:40:39.312622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3471): Terminated: ok {rc=0} 06:40:39.322529 --- ParallelTerminationStrategy: PID 3472 died... 06:40:39.378345 run iperf3-srv_10.42.42.10(pid=3472): Terminated {rc=256} 06:40:39.388604 --- ParallelTerminationStrategy: PID 3475 died... 06:40:39.443904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3475): Terminated: ok {rc=0} 06:40:39.454164 --- ParallelTerminationStrategy: PID 3478 died... 06:40:39.509758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3478): Terminated: ok {rc=0} 06:40:39.519848 --- ParallelTerminationStrategy: PID 3481 died... 06:40:39.575319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3481): Terminated: ok {rc=0} 06:40:39.661942 bus /gobi_0: Setting Powered False 06:40:40.769401 bus /gobi_0: Setting Powered False 06:40:41.880831 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3479): Process ended prematurely: osmo-stp_10.42.42.5(pid=3479) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3479)]