Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=3491): Process ended prematurely: osmo-stp_10.42.42.5(pid=3491) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3491)]
Standard Output
---------------------------------------------- trial-2355 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 06:40:43.001841 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.014349 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:40:43.158923 tst iperf3.py: using LAC 19634 06:40:43.287143 tst iperf3.py: using RAC 254 06:40:43.414324 tst iperf3.py: using CellId 19634 06:40:43.539552 tst iperf3.py: using BVCI 19635 06:40:43.564206 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.576051 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.587671 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.599828 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.611615 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.623233 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.635066 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.646717 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:43.658596 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:43.935395 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:40:44.058340 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:44.363489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3483): Launched 06:40:44.618166 run iperf3-srv_10.42.42.10(pid=3484): Launched 06:40:44.798576 tst iperf3.py:8: start network... 06:40:44.921633 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:40:45.390226 run create_hlr_db(pid=3485): Launched 06:40:45.560897 bus /gobi_6: Setting Powered False 06:40:46.640493 run create_hlr_db(pid=3485): Terminated: ok {rc=0} 06:40:47.123103 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3487): Launched 06:40:47.445581 run osmo-hlr_10.42.42.2(pid=3488): Launched 06:40:47.564918 run osmo-stp_10.42.42.5: Starting osmo-stp 06:40:48.117085 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3490): Launched 06:40:48.434772 run osmo-stp_10.42.42.5(pid=3491): Launched 06:40:48.550399 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:40:49.103647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3493): Launched 06:40:49.217870 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:40:49.494828 run patchelf(pid=3494): Launched 06:40:49.681856 run osmo-stp_10.42.42.5(pid=3491): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3491)] 06:40:49.818466 run osmo-stp_10.42.42.5(pid=3491): stdout: | (launched: 2022-12-09_06:40:48.279193) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:49.955191 run osmo-stp_10.42.42.5(pid=3491): stderr: | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209064048470 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:50.088034 run osmo-stp_10.42.42.5(pid=3491): stdout: | (launched: 2022-12-09_06:40:48.279193) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:50.220847 run osmo-stp_10.42.42.5(pid=3491): stderr: | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209064048469 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209064048470 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209064048470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:50.373764 run patchelf(pid=3494): Terminating (SIGINT) 06:40:50.552628 run patchelf(pid=3494): Terminated: ok {rc=0} 06:40:50.585707 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3491): Process ended prematurely: osmo-stp_10.42.42.5(pid=3491) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3491)] [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 06:40:50.595575 tst iperf3.py:8: Test FAILED (7.6 sec) 06:40:50.658434 run osmo-hlr_10.42.42.2(pid=3488): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3488)] 06:40:50.710047 run osmo-hlr_10.42.42.2(pid=3488): stdout: | (launched: 2022-12-09_06:40:47.289401) 06:40:50.762371 run osmo-hlr_10.42.42.2(pid=3488): stderr: | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209064047486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209064047498 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209064047506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209064047507 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209064047507 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:40:50.806882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3483): Terminating (SIGTERM) 06:40:50.848810 run iperf3-srv_10.42.42.10(pid=3484): Terminating (SIGTERM) 06:40:50.890731 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3487): Terminating (SIGTERM) 06:40:50.932634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3490): Terminating (SIGTERM) 06:40:50.974710 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3493): Terminating (SIGTERM) 06:40:50.984315 --- ParallelTerminationStrategy: PID 3483 died... 06:40:51.039858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3483): Terminated: ok {rc=0} 06:40:51.049911 --- ParallelTerminationStrategy: PID 3484 died... 06:40:51.105107 run iperf3-srv_10.42.42.10(pid=3484): Terminated {rc=256} 06:40:51.114954 --- ParallelTerminationStrategy: PID 3487 died... 06:40:51.170451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3487): Terminated: ok {rc=0} 06:40:51.180550 --- ParallelTerminationStrategy: PID 3490 died... 06:40:51.235901 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3490): Terminated: ok {rc=0} 06:40:51.245988 --- ParallelTerminationStrategy: PID 3493 died... 06:40:51.301195 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3493): Terminated: ok {rc=0} 06:40:51.388013 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3491): Process ended prematurely: osmo-stp_10.42.42.5(pid=3491) [trial-2355↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3491)]