Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=2948): Process ended prematurely: osmo-stp_10.42.42.5(pid=2948) [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2948)]
Standard Output
---------------------------------------------- trial-2355 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 06:37:29.202060 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.213073 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 06:37:29.353263 tst cs_paging_gprs_active.py: using LAC 19618 06:37:29.478174 tst cs_paging_gprs_active.py: using RAC 238 06:37:29.601339 tst cs_paging_gprs_active.py: using CellId 19618 06:37:29.725113 tst cs_paging_gprs_active.py: using BVCI 19619 06:37:29.749578 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.760514 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.771369 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.782253 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.792937 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.803826 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.814914 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.825708 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:29.836637 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 06:37:29.950590 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 06:37:30.226525 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:37:30.351018 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:37:30.658677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2938): Launched 06:37:30.943256 run iperf3-srv_10.42.42.10(pid=2939): Launched 06:37:31.165259 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:37:31.306318 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:37:31.658023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2940): Launched 06:37:31.981243 run iperf3-srv_10.42.42.10(pid=2941): Launched 06:37:32.182203 tst cs_paging_gprs_active.py:38: start network... 06:37:32.316272 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:37:32.828072 run create_hlr_db(pid=2942): Launched 06:37:33.012651 bus /sierra_2: Setting Powered False 06:37:34.034632 run create_hlr_db(pid=2942): Terminated: ok {rc=0} 06:37:34.461023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2944): Launched 06:37:34.779265 run osmo-hlr_10.42.42.2(pid=2945): Launched 06:37:34.895613 run osmo-stp_10.42.42.5: Starting osmo-stp 06:37:35.450537 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2947): Launched 06:37:35.769765 run osmo-stp_10.42.42.5(pid=2948): Launched 06:37:35.890023 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:37:36.449431 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2953): Launched 06:37:36.563395 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:37:36.840866 run patchelf(pid=2954): Launched 06:37:37.027967 run osmo-stp_10.42.42.5(pid=2948): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2948)] 06:37:37.165483 run osmo-stp_10.42.42.5(pid=2948): stdout: | (launched: 2022-12-09_06:37:35.613275) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:37:37.302643 run osmo-stp_10.42.42.5(pid=2948): stderr: | �[0;m�[38;5;43m20221209063735813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209063735813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209063735814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209063735814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209063735814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209063735815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209063735815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:37:37.434887 run osmo-stp_10.42.42.5(pid=2948): stdout: | (launched: 2022-12-09_06:37:35.613275) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:37:37.566308 run osmo-stp_10.42.42.5(pid=2948): stderr: | �[0;m�[38;5;43m20221209063735813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209063735813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209063735814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209063735814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209063735814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209063735815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209063735815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:37:37.718865 run patchelf(pid=2954): Terminating (SIGINT) 06:37:37.898287 run patchelf(pid=2954): Terminated: ok {rc=0} 06:37:37.931295 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2948): Process ended prematurely: osmo-stp_10.42.42.5(pid=2948) [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2948)] [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 06:37:37.940842 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 06:37:38.003204 run osmo-hlr_10.42.42.2(pid=2945): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2945)] 06:37:38.054295 run osmo-hlr_10.42.42.2(pid=2945): stdout: | (launched: 2022-12-09_06:37:34.623915) 06:37:38.106217 run osmo-hlr_10.42.42.2(pid=2945): stderr: | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209063734822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209063734834 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209063734843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209063734843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209063734843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:37:38.150437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2938): Terminating (SIGTERM) 06:37:38.192060 run iperf3-srv_10.42.42.10(pid=2939): Terminating (SIGTERM) 06:37:38.233644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2940): Terminating (SIGTERM) 06:37:38.274978 run iperf3-srv_10.42.42.10(pid=2941): Terminating (SIGTERM) 06:37:38.316499 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2944): Terminating (SIGTERM) 06:37:38.357958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2947): Terminating (SIGTERM) 06:37:38.399433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2953): Terminating (SIGTERM) 06:37:38.409110 --- ParallelTerminationStrategy: PID 2938 died... 06:37:38.465093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2938): Terminated: ok {rc=0} 06:37:38.475148 --- ParallelTerminationStrategy: PID 2939 died... 06:37:38.530137 run iperf3-srv_10.42.42.10(pid=2939): Terminated {rc=256} 06:37:38.540083 --- ParallelTerminationStrategy: PID 2940 died... 06:37:38.595248 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2940): Terminated: ok {rc=0} 06:37:38.605258 --- ParallelTerminationStrategy: PID 2941 died... 06:37:38.660154 run iperf3-srv_10.42.42.10(pid=2941): Terminated {rc=256} 06:37:38.670144 --- ParallelTerminationStrategy: PID 2944 died... 06:37:38.725272 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2944): Terminated: ok {rc=0} 06:37:38.735298 --- ParallelTerminationStrategy: PID 2947 died... 06:37:38.790486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2947): Terminated: ok {rc=0} 06:37:38.800404 --- ParallelTerminationStrategy: PID 2953 died... 06:37:38.855737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2953): Terminated: ok {rc=0} 06:37:38.941067 bus /gobi_0: Setting Powered False 06:37:40.046955 bus /gobi_0: Setting Powered False 06:37:41.153364 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2948): Process ended prematurely: osmo-stp_10.42.42.5(pid=2948) [trial-2355↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2948)]