Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30280): Process ended prematurely: osmo-stp_10.42.42.5(pid=30280) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30280)]
Standard Output
---------------------------------------------- trial-2355 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:44:53.950441 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:53.961101 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:44:54.102253 tst cs_paging_gprs_active.py: using LAC 19336 05:44:54.225870 tst cs_paging_gprs_active.py: using RAC 211 05:44:54.351760 tst cs_paging_gprs_active.py: using CellId 19336 05:44:54.475180 tst cs_paging_gprs_active.py: using BVCI 19337 05:44:54.500194 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.511563 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.522544 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.533935 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.544874 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.556009 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.567302 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.578328 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:54.589760 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:44:54.709162 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:44:54.998377 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:44:55.131615 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:55.460837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30270): Launched 05:44:55.735098 run iperf3-srv_10.42.42.10(pid=30271): Launched 05:44:55.930553 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:44:56.063803 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:56.391632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30272): Launched 05:44:56.665601 run iperf3-srv_10.42.42.10(pid=30273): Launched 05:44:56.860287 tst cs_paging_gprs_active.py:38: start network... 05:44:56.992853 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:44:57.503458 run create_hlr_db(pid=30274): Launched 05:44:57.688436 bus /gobi_6: Setting Powered False 05:44:58.700032 run create_hlr_db(pid=30274): Terminated: ok {rc=0} 05:44:59.101972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30276): Launched 05:44:59.400789 run osmo-hlr_10.42.42.2(pid=30277): Launched 05:44:59.515224 run osmo-stp_10.42.42.5: Starting osmo-stp 05:45:00.030296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30279): Launched 05:45:00.327489 run osmo-stp_10.42.42.5(pid=30280): Launched 05:45:00.436464 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:45:00.989266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30282): Launched 05:45:01.105913 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:45:01.396039 run patchelf(pid=30283): Launched 05:45:01.603401 run osmo-stp_10.42.42.5(pid=30280): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30280)] 05:45:01.743712 run osmo-stp_10.42.42.5(pid=30280): stdout: | (launched: 2022-12-09_05:45:00.181703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:01.882066 run osmo-stp_10.42.42.5(pid=30280): stderr: | �[0;m�[38;5;43m20221209054500350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054500350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054500351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054500351 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:02.009919 run osmo-stp_10.42.42.5(pid=30280): stdout: | (launched: 2022-12-09_05:45:00.181703) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:02.136223 run osmo-stp_10.42.42.5(pid=30280): stderr: | �[0;m�[38;5;43m20221209054500350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054500350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054500351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054500351 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054500351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:02.283628 run patchelf(pid=30283): Terminating (SIGINT) 05:45:02.457797 run patchelf(pid=30283): Terminated: ok {rc=0} 05:45:02.490286 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30280): Process ended prematurely: osmo-stp_10.42.42.5(pid=30280) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30280)] [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:45:02.500539 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 05:45:02.565368 run osmo-hlr_10.42.42.2(pid=30277): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30277)] 05:45:02.617292 run osmo-hlr_10.42.42.2(pid=30277): stdout: | (launched: 2022-12-09_05:44:59.253488) 05:45:02.681943 run osmo-hlr_10.42.42.2(pid=30277): stderr: | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209054459429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209054459441 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209054459450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209054459450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209054459450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:45:02.727915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30270): Terminating (SIGTERM) 05:45:02.771300 run iperf3-srv_10.42.42.10(pid=30271): Terminating (SIGTERM) 05:45:02.813560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30272): Terminating (SIGTERM) 05:45:02.854151 run iperf3-srv_10.42.42.10(pid=30273): Terminating (SIGTERM) 05:45:02.894893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30276): Terminating (SIGTERM) 05:45:02.935612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30279): Terminating (SIGTERM) 05:45:02.976090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30282): Terminating (SIGTERM) 05:45:02.985973 --- ParallelTerminationStrategy: PID 30270 died... 05:45:03.039770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30270): Terminated: ok {rc=0} 05:45:03.049990 --- ParallelTerminationStrategy: PID 30271 died... 05:45:03.104095 run iperf3-srv_10.42.42.10(pid=30271): Terminated {rc=256} 05:45:03.113737 --- ParallelTerminationStrategy: PID 30272 died... 05:45:03.167056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30272): Terminated: ok {rc=0} 05:45:03.177242 --- ParallelTerminationStrategy: PID 30273 died... 05:45:03.230528 run iperf3-srv_10.42.42.10(pid=30273): Terminated {rc=256} 05:45:03.240662 --- ParallelTerminationStrategy: PID 30276 died... 05:45:03.295108 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30276): Terminated: ok {rc=0} 05:45:03.304597 --- ParallelTerminationStrategy: PID 30279 died... 05:45:03.358024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30279): Terminated: ok {rc=0} 05:45:03.367777 --- ParallelTerminationStrategy: PID 30282 died... 05:45:03.421054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30282): Terminated: ok {rc=0} 05:45:03.509778 bus /gobi_0: Setting Powered False 05:45:04.611732 bus /gobi_0: Setting Powered False 05:45:05.722382 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30280): Process ended prematurely: osmo-stp_10.42.42.5(pid=30280) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30280)]