Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30868): Process ended prematurely: osmo-stp_10.42.42.5(pid=30868) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30868)]
Standard Output
---------------------------------------------- trial-2355 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 05:45:44.968078 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:44.980659 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:45:45.134410 tst ping_idle_ping.py: using LAC 19340 05:45:45.260381 tst ping_idle_ping.py: using RAC 215 05:45:45.387255 tst ping_idle_ping.py: using CellId 19340 05:45:45.513792 tst ping_idle_ping.py: using BVCI 19341 05:45:45.538524 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.550015 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.561391 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.572551 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.583789 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.594997 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.606444 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:45.617670 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:45:45.901144 tst ping_idle_ping.py:24: start network... 05:45:46.029774 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:45:46.563638 run create_hlr_db(pid=30862): Launched 05:45:46.742864 bus /gobi_6: Setting Powered False 05:45:47.759818 run create_hlr_db(pid=30862): Terminated: ok {rc=0} 05:45:48.191339 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30864): Launched 05:45:48.514774 run osmo-hlr_10.42.42.2(pid=30865): Launched 05:45:48.632376 run osmo-stp_10.42.42.5: Starting osmo-stp 05:45:49.194309 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30867): Launched 05:45:49.517210 run osmo-stp_10.42.42.5(pid=30868): Launched 05:45:49.633989 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:45:50.197947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30870): Launched 05:45:50.312668 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:45:50.594883 run patchelf(pid=30871): Launched 05:45:50.784271 run osmo-stp_10.42.42.5(pid=30868): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30868)] 05:45:50.923212 run osmo-stp_10.42.42.5(pid=30868): stdout: | (launched: 2022-12-09_05:45:49.358412) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:51.062214 run osmo-stp_10.42.42.5(pid=30868): stderr: | �[0;m�[38;5;43m20221209054549550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054549551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054549551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054549551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:51.195369 run osmo-stp_10.42.42.5(pid=30868): stdout: | (launched: 2022-12-09_05:45:49.358412) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:51.328104 run osmo-stp_10.42.42.5(pid=30868): stderr: | �[0;m�[38;5;43m20221209054549550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054549551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054549551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054549551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054549552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:51.482341 run patchelf(pid=30871): Terminating (SIGINT) 05:45:51.663893 run patchelf(pid=30871): Terminated: ok {rc=0} 05:45:51.696799 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30868): Process ended prematurely: osmo-stp_10.42.42.5(pid=30868) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30868)] [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 05:45:51.706011 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 05:45:51.769179 run osmo-hlr_10.42.42.2(pid=30865): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30865)] 05:45:51.821018 run osmo-hlr_10.42.42.2(pid=30865): stdout: | (launched: 2022-12-09_05:45:48.355572) 05:45:51.873290 run osmo-hlr_10.42.42.2(pid=30865): stderr: | �[0;m�[1;31m20221209054548554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209054548554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209054548554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209054548555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209054548555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209054548555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209054548567 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209054548575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209054548575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209054548575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:45:51.918221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30864): Terminating (SIGTERM) 05:45:51.960255 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30867): Terminating (SIGTERM) 05:45:52.002840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30870): Terminating (SIGTERM) 05:45:52.012555 --- ParallelTerminationStrategy: PID 30864 died... 05:45:52.068531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30864): Terminated: ok {rc=0} 05:45:52.078765 --- ParallelTerminationStrategy: PID 30867 died... 05:45:52.134404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30867): Terminated: ok {rc=0} 05:45:52.144597 --- ParallelTerminationStrategy: PID 30870 died... 05:45:52.200413 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30870): Terminated: ok {rc=0} 05:45:52.287046 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30868): Process ended prematurely: osmo-stp_10.42.42.5(pid=30868) [trial-2355↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30868)]