Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30144): Process ended prematurely: osmo-stp_10.42.42.5(pid=30144) [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30144)]
Standard Output
---------------------------------------------- trial-2355 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 05:42:55.626615 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:55.637581 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 05:42:55.764723 tst cs_paging_gprs_active.py: using LAC 19326 05:42:55.889174 tst cs_paging_gprs_active.py: using RAC 201 05:42:56.017543 tst cs_paging_gprs_active.py: using CellId 19326 05:42:56.139971 tst cs_paging_gprs_active.py: using BVCI 19327 05:42:56.164157 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.175507 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.186317 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.197133 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.207758 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.218653 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.229838 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.240506 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:56.251629 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:42:56.367823 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:42:56.640927 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:42:56.765126 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:42:57.071151 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30134): Launched 05:42:57.325995 run iperf3-srv_10.42.42.10(pid=30135): Launched 05:42:57.506378 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:42:57.629695 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:42:57.935975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30136): Launched 05:42:58.191056 run iperf3-srv_10.42.42.10(pid=30137): Launched 05:42:58.370532 tst cs_paging_gprs_active.py:38: start network... 05:42:58.494155 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:42:58.961885 run create_hlr_db(pid=30138): Launched 05:42:59.132358 bus /gobi_6: Setting Powered False 05:43:00.155412 run create_hlr_db(pid=30138): Terminated: ok {rc=0} 05:43:00.551097 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30140): Launched 05:43:00.846304 run osmo-hlr_10.42.42.2(pid=30141): Launched 05:43:00.996135 run osmo-stp_10.42.42.5: Starting osmo-stp 05:43:01.719733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30143): Launched 05:43:02.147398 run osmo-stp_10.42.42.5(pid=30144): Launched 05:43:02.293378 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:43:02.851815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30146): Launched 05:43:02.965455 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:43:03.241721 run patchelf(pid=30147): Launched 05:43:03.429425 run osmo-stp_10.42.42.5(pid=30144): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30144)] 05:43:03.566188 run osmo-stp_10.42.42.5(pid=30144): stdout: | (launched: 2022-12-09_05:43:01.888753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:43:03.703232 run osmo-stp_10.42.42.5(pid=30144): stderr: | �[0;m�[38;5;43m20221209054302187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054302188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054302188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054302188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054302190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054302191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054302191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:43:03.835400 run osmo-stp_10.42.42.5(pid=30144): stdout: | (launched: 2022-12-09_05:43:01.888753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:43:03.966342 run osmo-stp_10.42.42.5(pid=30144): stderr: | �[0;m�[38;5;43m20221209054302187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209054302188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209054302188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209054302188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209054302190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209054302191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209054302191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:43:04.118330 run patchelf(pid=30147): Terminating (SIGINT) 05:43:04.296685 run patchelf(pid=30147): Terminated: ok {rc=0} 05:43:04.329593 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30144): Process ended prematurely: osmo-stp_10.42.42.5(pid=30144) [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30144)] [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 05:43:04.339310 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 05:43:04.402144 run osmo-hlr_10.42.42.2(pid=30141): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30141)] 05:43:04.454577 run osmo-hlr_10.42.42.2(pid=30141): stdout: | (launched: 2022-12-09_05:43:00.701530) 05:43:04.506921 run osmo-hlr_10.42.42.2(pid=30141): stderr: | �[0;m�[1;31m20221209054300957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209054300957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209054300957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209054300957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209054300958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209054300958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209054300980 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209054301005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209054301005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209054301005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:43:04.551539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30134): Terminating (SIGTERM) 05:43:04.593746 run iperf3-srv_10.42.42.10(pid=30135): Terminating (SIGTERM) 05:43:04.635986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30136): Terminating (SIGTERM) 05:43:04.678072 run iperf3-srv_10.42.42.10(pid=30137): Terminating (SIGTERM) 05:43:04.720246 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30140): Terminating (SIGTERM) 05:43:04.762477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30143): Terminating (SIGTERM) 05:43:04.804531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30146): Terminating (SIGTERM) 05:43:04.814241 --- ParallelTerminationStrategy: PID 30134 died... 05:43:04.870424 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30134): Terminated: ok {rc=0} 05:43:04.880567 --- ParallelTerminationStrategy: PID 30135 died... 05:43:04.936037 run iperf3-srv_10.42.42.10(pid=30135): Terminated {rc=256} 05:43:04.946077 --- ParallelTerminationStrategy: PID 30136 died... 05:43:05.001788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30136): Terminated: ok {rc=0} 05:43:05.011714 --- ParallelTerminationStrategy: PID 30137 died... 05:43:05.067456 run iperf3-srv_10.42.42.10(pid=30137): Terminated {rc=256} 05:43:05.077585 --- ParallelTerminationStrategy: PID 30140 died... 05:43:05.133165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30140): Terminated: ok {rc=0} 05:43:05.143176 --- ParallelTerminationStrategy: PID 30143 died... 05:43:05.198880 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30143): Terminated: ok {rc=0} 05:43:05.208915 --- ParallelTerminationStrategy: PID 30146 died... 05:43:05.264807 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30146): Terminated: ok {rc=0} 05:43:05.351838 bus /gobi_0: Setting Powered False 05:43:06.455272 bus /gobi_0: Setting Powered False 05:43:07.565859 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30144): Process ended prematurely: osmo-stp_10.42.42.5(pid=30144) [trial-2355↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30144)]