Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29458): Process ended prematurely: osmo-stp_10.42.42.5(pid=29458) [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29458)]
Standard Output
---------------------------------------------- trial-2355 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:36:58.011070 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.022600 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:36:58.178036 tst cs_paging_gprs_active.py: using LAC 19294 05:36:58.308130 tst cs_paging_gprs_active.py: using RAC 169 05:36:58.437955 tst cs_paging_gprs_active.py: using CellId 19294 05:36:58.569592 tst cs_paging_gprs_active.py: using BVCI 19295 05:36:58.595503 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.606848 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.618002 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.629170 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.640280 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.651615 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.662893 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.674233 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:58.685696 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:36:58.806665 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:36:59.110204 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:36:59.251132 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:36:59.599181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29448): Launched 05:36:59.889771 run iperf3-srv_10.42.42.10(pid=29449): Launched 05:37:00.094511 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:37:00.233881 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:37:00.583884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29450): Launched 05:37:00.874461 run iperf3-srv_10.42.42.10(pid=29451): Launched 05:37:01.083782 tst cs_paging_gprs_active.py:38: start network... 05:37:01.227096 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:37:01.808412 run create_hlr_db(pid=29452): Launched 05:37:02.006855 bus /gobi_6: Setting Powered False 05:37:03.022893 run create_hlr_db(pid=29452): Terminated: ok {rc=0} 05:37:03.445157 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29454): Launched 05:37:03.762658 run osmo-hlr_10.42.42.2(pid=29455): Launched 05:37:03.883102 run osmo-stp_10.42.42.5: Starting osmo-stp 05:37:04.428936 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29457): Launched 05:37:04.744083 run osmo-stp_10.42.42.5(pid=29458): Launched 05:37:04.858319 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:37:05.406877 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29460): Launched 05:37:05.519201 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:37:05.795629 run patchelf(pid=29461): Launched 05:37:05.979593 run osmo-stp_10.42.42.5(pid=29458): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29458)] 05:37:06.114518 run osmo-stp_10.42.42.5(pid=29458): stdout: | (launched: 2022-12-09_05:37:04.587819) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:37:06.248519 run osmo-stp_10.42.42.5(pid=29458): stderr: | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209053704764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:37:06.378542 run osmo-stp_10.42.42.5(pid=29458): stdout: | (launched: 2022-12-09_05:37:04.587819) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:37:06.507278 run osmo-stp_10.42.42.5(pid=29458): stderr: | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209053704763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209053704764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209053704766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:37:06.657465 run patchelf(pid=29461): Terminating (SIGINT) 05:37:06.833823 run patchelf(pid=29461): Terminated: ok {rc=0} 05:37:06.865855 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29458): Process ended prematurely: osmo-stp_10.42.42.5(pid=29458) [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29458)] [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:37:06.875194 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:37:06.936997 run osmo-hlr_10.42.42.2(pid=29455): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29455)] 05:37:06.987021 run osmo-hlr_10.42.42.2(pid=29455): stdout: | (launched: 2022-12-09_05:37:03.605384) 05:37:07.037976 run osmo-hlr_10.42.42.2(pid=29455): stderr: | �[0;m�[1;31m20221209053703785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209053703785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209053703785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209053703786 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209053703786 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209053703786 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209053703797 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209053703806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209053703806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209053703806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:37:07.081015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29448): Terminating (SIGTERM) 05:37:07.121874 run iperf3-srv_10.42.42.10(pid=29449): Terminating (SIGTERM) 05:37:07.163023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29450): Terminating (SIGTERM) 05:37:07.203432 run iperf3-srv_10.42.42.10(pid=29451): Terminating (SIGTERM) 05:37:07.243960 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29454): Terminating (SIGTERM) 05:37:07.284723 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29457): Terminating (SIGTERM) 05:37:07.325773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29460): Terminating (SIGTERM) 05:37:07.335849 --- ParallelTerminationStrategy: PID 29448 died... 05:37:07.389956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29448): Terminated: ok {rc=0} 05:37:07.400037 --- ParallelTerminationStrategy: PID 29449 died... 05:37:07.453633 run iperf3-srv_10.42.42.10(pid=29449): Terminated {rc=256} 05:37:07.463507 --- ParallelTerminationStrategy: PID 29450 died... 05:37:07.517378 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29450): Terminated: ok {rc=0} 05:37:07.527313 --- ParallelTerminationStrategy: PID 29451 died... 05:37:07.581759 run iperf3-srv_10.42.42.10(pid=29451): Terminated {rc=256} 05:37:07.591513 --- ParallelTerminationStrategy: PID 29454 died... 05:37:07.645806 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29454): Terminated: ok {rc=0} 05:37:07.655472 --- ParallelTerminationStrategy: PID 29457 died... 05:37:07.709122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29457): Terminated: ok {rc=0} 05:37:07.719092 --- ParallelTerminationStrategy: PID 29460 died... 05:37:07.772698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29460): Terminated: ok {rc=0} 05:37:07.861673 bus /gobi_0: Setting Powered False 05:37:08.966099 bus /gobi_0: Setting Powered False 05:37:10.078255 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29458): Process ended prematurely: osmo-stp_10.42.42.5(pid=29458) [trial-2355↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29458)]