Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29324): Process ended prematurely: osmo-stp_10.42.42.5(pid=29324) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29324)]
Standard Output
---------------------------------------------- trial-2355 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 05:34:56.297453 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.308727 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 05:34:56.443328 tst cs_paging_gprs_active.py: using LAC 19284 05:34:56.576180 tst cs_paging_gprs_active.py: using RAC 159 05:34:56.707777 tst cs_paging_gprs_active.py: using CellId 19284 05:34:56.841051 tst cs_paging_gprs_active.py: using BVCI 19285 05:34:56.867047 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.878425 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.889527 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.900681 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.911680 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.922689 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.933995 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.945099 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:34:56.956402 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:34:57.074175 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:34:57.376198 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:34:57.516543 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:34:57.864806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29311): Launched 05:34:58.155228 run iperf3-srv_10.42.42.10(pid=29312): Launched 05:34:58.361265 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:34:58.501461 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:34:58.851441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29313): Launched 05:34:59.141587 run iperf3-srv_10.42.42.10(pid=29314): Launched 05:34:59.347370 tst cs_paging_gprs_active.py:38: start network... 05:34:59.487187 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:35:00.026405 run create_hlr_db(pid=29315): Launched 05:35:00.220035 bus /gobi_6: Setting Powered False 05:35:01.242763 run create_hlr_db(pid=29315): Terminated: ok {rc=0} 05:35:01.721781 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29320): Launched 05:35:02.141781 run osmo-hlr_10.42.42.2(pid=29321): Launched 05:35:02.292491 run osmo-stp_10.42.42.5: Starting osmo-stp 05:35:02.848428 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29323): Launched 05:35:03.163870 run osmo-stp_10.42.42.5(pid=29324): Launched 05:35:03.278666 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:35:03.826051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29326): Launched 05:35:03.937498 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:35:04.212044 run patchelf(pid=29327): Launched 05:35:04.395346 run osmo-stp_10.42.42.5(pid=29324): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29324)] 05:35:04.528936 run osmo-stp_10.42.42.5(pid=29324): stdout: | (launched: 2022-12-09_05:35:03.007439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:35:04.663346 run osmo-stp_10.42.42.5(pid=29324): stderr: | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209053503184 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:35:04.792914 run osmo-stp_10.42.42.5(pid=29324): stdout: | (launched: 2022-12-09_05:35:03.007439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:35:04.921704 run osmo-stp_10.42.42.5(pid=29324): stderr: | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209053503184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209053503184 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209053503185 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:35:05.071139 run patchelf(pid=29327): Terminating (SIGINT) 05:35:05.246378 run patchelf(pid=29327): Terminated: ok {rc=0} 05:35:05.278384 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29324): Process ended prematurely: osmo-stp_10.42.42.5(pid=29324) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29324)] [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 05:35:05.287557 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 05:35:05.349037 run osmo-hlr_10.42.42.2(pid=29321): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29321)] 05:35:05.398914 run osmo-hlr_10.42.42.2(pid=29321): stdout: | (launched: 2022-12-09_05:35:01.885543) 05:35:05.449465 run osmo-hlr_10.42.42.2(pid=29321): stderr: | �[0;m�[1;31m20221209053502215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209053502215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209053502215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209053502215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209053502215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209053502216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209053502228 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209053502238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209053502238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209053502238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:35:05.492496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29311): Terminating (SIGTERM) 05:35:05.533184 run iperf3-srv_10.42.42.10(pid=29312): Terminating (SIGTERM) 05:35:05.573965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29313): Terminating (SIGTERM) 05:35:05.614562 run iperf3-srv_10.42.42.10(pid=29314): Terminating (SIGTERM) 05:35:05.655258 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29320): Terminating (SIGTERM) 05:35:05.695859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29323): Terminating (SIGTERM) 05:35:05.736465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29326): Terminating (SIGTERM) 05:35:05.746046 --- ParallelTerminationStrategy: PID 29311 died... 05:35:05.800317 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29311): Terminated: ok {rc=0} 05:35:05.810344 --- ParallelTerminationStrategy: PID 29312 died... 05:35:05.863979 run iperf3-srv_10.42.42.10(pid=29312): Terminated {rc=256} 05:35:05.873802 --- ParallelTerminationStrategy: PID 29313 died... 05:35:05.927761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29313): Terminated: ok {rc=0} 05:35:05.937883 --- ParallelTerminationStrategy: PID 29314 died... 05:35:05.991583 run iperf3-srv_10.42.42.10(pid=29314): Terminated {rc=256} 05:35:06.001845 --- ParallelTerminationStrategy: PID 29320 died... 05:35:06.056065 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29320): Terminated: ok {rc=0} 05:35:06.065729 --- ParallelTerminationStrategy: PID 29323 died... 05:35:06.119683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29323): Terminated: ok {rc=0} 05:35:06.129455 --- ParallelTerminationStrategy: PID 29326 died... 05:35:06.182896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29326): Terminated: ok {rc=0} 05:35:06.267691 bus /gobi_0: Setting Powered False 05:35:07.376428 bus /gobi_0: Setting Powered False 05:35:08.487202 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29324): Process ended prematurely: osmo-stp_10.42.42.5(pid=29324) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29324)]