Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31324): Process ended prematurely: osmo-stp_10.42.42.5(pid=31324) [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31324)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 05:52:23.157147 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.169171 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 05:52:23.317105 tst ping_idle_ping.py: using LAC 19376 05:52:23.445692 tst ping_idle_ping.py: using RAC 251 05:52:23.574447 tst ping_idle_ping.py: using CellId 19376 05:52:23.700871 tst ping_idle_ping.py: using BVCI 19377 05:52:23.726194 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.737707 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.748846 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.760180 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.771477 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.782638 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.794100 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:23.805336 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:52:24.101406 tst ping_idle_ping.py:24: start network... 05:52:24.236842 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:52:24.758034 run create_hlr_db(pid=31318): Launched 05:52:24.947169 bus /gobi_6: Setting Powered False 05:52:25.967552 run create_hlr_db(pid=31318): Terminated: ok {rc=0} 05:52:26.376879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31320): Launched 05:52:26.681168 run osmo-hlr_10.42.42.2(pid=31321): Launched 05:52:26.799349 run osmo-stp_10.42.42.5: Starting osmo-stp 05:52:27.336311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31323): Launched 05:52:27.640071 run osmo-stp_10.42.42.5(pid=31324): Launched 05:52:27.750716 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:52:28.281240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31326): Launched 05:52:28.389469 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:52:28.655531 run patchelf(pid=31327): Launched 05:52:28.834566 run osmo-stp_10.42.42.5(pid=31324): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31324)] 05:52:28.965610 run osmo-stp_10.42.42.5(pid=31324): stdout: | (launched: 2022-12-09_05:52:27.490357) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:29.096305 run osmo-stp_10.42.42.5(pid=31324): stderr: | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055227663 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:29.222328 run osmo-stp_10.42.42.5(pid=31324): stdout: | (launched: 2022-12-09_05:52:27.490357) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:29.347087 run osmo-stp_10.42.42.5(pid=31324): stderr: | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055227662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055227663 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055227663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:29.492722 run patchelf(pid=31327): Terminating (SIGINT) 05:52:29.664152 run patchelf(pid=31327): Terminated: ok {rc=0} 05:52:29.695119 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31324): Process ended prematurely: osmo-stp_10.42.42.5(pid=31324) [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31324)] [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 05:52:29.703710 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 05:52:29.765076 run osmo-hlr_10.42.42.2(pid=31321): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31321)] 05:52:29.815002 run osmo-hlr_10.42.42.2(pid=31321): stdout: | (launched: 2022-12-09_05:52:26.530740) 05:52:29.865830 run osmo-hlr_10.42.42.2(pid=31321): stderr: | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209055226707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209055226728 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209055226737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209055226738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209055226738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:52:29.908654 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31320): Terminating (SIGTERM) 05:52:29.949420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31323): Terminating (SIGTERM) 05:52:29.990077 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31326): Terminating (SIGTERM) 05:52:29.999654 --- ParallelTerminationStrategy: PID 31320 died... 05:52:30.054218 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31320): Terminated: ok {rc=0} 05:52:30.063918 --- ParallelTerminationStrategy: PID 31323 died... 05:52:30.117983 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31323): Terminated: ok {rc=0} 05:52:30.127992 --- ParallelTerminationStrategy: PID 31326 died... 05:52:30.182365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31326): Terminated: ok {rc=0} 05:52:30.267458 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31324): Process ended prematurely: osmo-stp_10.42.42.5(pid=31324) [trial-2355↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31324)]