Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=31206): Process ended prematurely: osmo-stp_10.42.42.5(pid=31206) [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31206)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 05:50:31.319998 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:31.331903 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 05:50:31.507197 tst cs_paging_gprs_active.py: using LAC 19367 05:50:31.677560 tst cs_paging_gprs_active.py: using RAC 242 05:50:31.831920 tst cs_paging_gprs_active.py: using CellId 19367 05:50:32.001326 tst cs_paging_gprs_active.py: using BVCI 19368 05:50:32.029800 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.041837 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.053401 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.064791 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.076166 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.088102 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.100060 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.111569 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:32.123185 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:32.250714 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:32.550635 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:50:32.688877 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:50:33.030196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31196): Launched 05:50:33.314558 run iperf3-srv_10.42.42.10(pid=31197): Launched 05:50:33.516340 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:50:33.654122 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:50:33.995282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31198): Launched 05:50:34.279368 run iperf3-srv_10.42.42.10(pid=31199): Launched 05:50:34.481449 tst cs_paging_gprs_active.py:38: start network... 05:50:34.618840 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:50:35.148224 run create_hlr_db(pid=31200): Launched 05:50:35.339443 bus /sierra_2: Setting Powered False 05:50:36.360714 run create_hlr_db(pid=31200): Terminated: ok {rc=0} 05:50:36.799814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31202): Launched 05:50:37.129819 run osmo-hlr_10.42.42.2(pid=31203): Launched 05:50:37.250865 run osmo-stp_10.42.42.5: Starting osmo-stp 05:50:37.824850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31205): Launched 05:50:38.155240 run osmo-stp_10.42.42.5(pid=31206): Launched 05:50:38.274437 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:50:38.853154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31208): Launched 05:50:38.971683 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:50:39.260627 run patchelf(pid=31209): Launched 05:50:39.455072 run osmo-stp_10.42.42.5(pid=31206): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31206)] 05:50:39.596414 run osmo-stp_10.42.42.5(pid=31206): stdout: | (launched: 2022-12-09_05:50:37.992907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:39.738695 run osmo-stp_10.42.42.5(pid=31206): stderr: | �[0;m�[38;5;43m20221209055038186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055038186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055038187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055038187 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055038187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055038188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055038188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:39.875616 run osmo-stp_10.42.42.5(pid=31206): stdout: | (launched: 2022-12-09_05:50:37.992907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:40.012127 run osmo-stp_10.42.42.5(pid=31206): stderr: | �[0;m�[38;5;43m20221209055038186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055038186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055038187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055038187 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055038187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055038188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055038188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:40.170720 run patchelf(pid=31209): Terminating (SIGINT) 05:50:40.355694 run patchelf(pid=31209): Terminated: ok {rc=0} 05:50:40.389665 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31206): Process ended prematurely: osmo-stp_10.42.42.5(pid=31206) [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31206)] [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 05:50:40.399500 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 05:50:40.463330 run osmo-hlr_10.42.42.2(pid=31203): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31203)] 05:50:40.515082 run osmo-hlr_10.42.42.2(pid=31203): stdout: | (launched: 2022-12-09_05:50:36.967861) 05:50:40.567245 run osmo-hlr_10.42.42.2(pid=31203): stderr: | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209055037169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209055037181 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209055037190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209055037191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209055037191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:50:40.611708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31196): Terminating (SIGTERM) 05:50:40.653750 run iperf3-srv_10.42.42.10(pid=31197): Terminating (SIGTERM) 05:50:40.696320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31198): Terminating (SIGTERM) 05:50:40.738573 run iperf3-srv_10.42.42.10(pid=31199): Terminating (SIGTERM) 05:50:40.780614 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31202): Terminating (SIGTERM) 05:50:40.822816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31205): Terminating (SIGTERM) 05:50:40.865280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31208): Terminating (SIGTERM) 05:50:40.875032 --- ParallelTerminationStrategy: PID 31196 died... 05:50:40.931585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31196): Terminated: ok {rc=0} 05:50:40.941729 --- ParallelTerminationStrategy: PID 31197 died... 05:50:40.997604 run iperf3-srv_10.42.42.10(pid=31197): Terminated {rc=256} 05:50:41.007665 --- ParallelTerminationStrategy: PID 31198 died... 05:50:41.063594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31198): Terminated: ok {rc=0} 05:50:41.073733 --- ParallelTerminationStrategy: PID 31199 died... 05:50:41.129587 run iperf3-srv_10.42.42.10(pid=31199): Terminated {rc=256} 05:50:41.139944 --- ParallelTerminationStrategy: PID 31202 died... 05:50:41.195815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31202): Terminated: ok {rc=0} 05:50:41.205910 --- ParallelTerminationStrategy: PID 31205 died... 05:50:41.261873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31205): Terminated: ok {rc=0} 05:50:41.272025 --- ParallelTerminationStrategy: PID 31208 died... 05:50:41.328206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31208): Terminated: ok {rc=0} 05:50:41.416543 bus /gobi_0: Setting Powered False 05:50:42.523438 bus /gobi_0: Setting Powered False 05:50:43.635238 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31206): Process ended prematurely: osmo-stp_10.42.42.5(pid=31206) [trial-2355↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31206)]