Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=736): Process ended prematurely: osmo-stp_10.42.42.5(pid=736) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=736)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:10:41.230529 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.241577 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:10:41.396258 tst cs_paging_gprs_active.py: using LAC 19473 06:10:41.513318 tst cs_paging_gprs_active.py: using RAC 93 06:10:41.632822 tst cs_paging_gprs_active.py: using CellId 19473 06:10:41.752894 tst cs_paging_gprs_active.py: using BVCI 19474 06:10:41.775830 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.786642 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.797303 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.808231 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.819567 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.830736 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.841893 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.852876 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:41.864060 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:10:42.006308 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:10:42.304844 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:10:42.440423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:42.774782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=726): Launched 06:10:43.051863 run iperf3-srv_10.42.42.10(pid=727): Launched 06:10:43.249081 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:10:43.383768 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:43.717412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=728): Launched 06:10:43.994399 run iperf3-srv_10.42.42.10(pid=729): Launched 06:10:44.191486 tst cs_paging_gprs_active.py:38: start network... 06:10:44.326306 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:10:44.841969 run create_hlr_db(pid=730): Launched 06:10:45.027632 bus /gobi_6: Setting Powered False 06:10:46.054324 run create_hlr_db(pid=730): Terminated: ok {rc=0} 06:10:46.488344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=732): Launched 06:10:46.828792 run osmo-hlr_10.42.42.2(pid=733): Launched 06:10:47.061540 run osmo-stp_10.42.42.5: Starting osmo-stp 06:10:47.676164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=735): Launched 06:10:47.976464 run osmo-stp_10.42.42.5(pid=736): Launched 06:10:48.093887 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:10:48.609838 run pcap-recorder_any(filters='host 10.42.42.6')(pid=738): Launched 06:10:48.715408 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:10:48.975037 run patchelf(pid=739): Launched 06:10:49.149392 run osmo-stp_10.42.42.5(pid=736): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=736)] 06:10:49.276388 run osmo-stp_10.42.42.5(pid=736): stdout: | (launched: 2022-12-09_06:10:47.828582) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:49.403794 run osmo-stp_10.42.42.5(pid=736): stderr: | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061048001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:49.527012 run osmo-stp_10.42.42.5(pid=736): stdout: | (launched: 2022-12-09_06:10:47.828582) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:49.649159 run osmo-stp_10.42.42.5(pid=736): stderr: | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061048000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061048001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061048001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:49.791247 run patchelf(pid=739): Terminating (SIGINT) 06:10:49.958495 run patchelf(pid=739): Terminated: ok {rc=0} 06:10:49.989399 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=736): Process ended prematurely: osmo-stp_10.42.42.5(pid=736) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=736)] [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:10:49.998453 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 06:10:50.058619 run osmo-hlr_10.42.42.2(pid=733): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=733)] 06:10:50.107820 run osmo-hlr_10.42.42.2(pid=733): stdout: | (launched: 2022-12-09_06:10:46.646102) 06:10:50.157478 run osmo-hlr_10.42.42.2(pid=733): stderr: | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061046991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061047006 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061047030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061047031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061047031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:10:50.199915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=726): Terminating (SIGTERM) 06:10:50.240382 run iperf3-srv_10.42.42.10(pid=727): Terminating (SIGTERM) 06:10:50.280396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=728): Terminating (SIGTERM) 06:10:50.321096 run iperf3-srv_10.42.42.10(pid=729): Terminating (SIGTERM) 06:10:50.361365 run pcap-recorder_any(filters='host 10.42.42.2')(pid=732): Terminating (SIGTERM) 06:10:50.401434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=735): Terminating (SIGTERM) 06:10:50.441535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=738): Terminating (SIGTERM) 06:10:50.450874 --- ParallelTerminationStrategy: PID 726 died... 06:10:50.504112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=726): Terminated: ok {rc=0} 06:10:50.513899 --- ParallelTerminationStrategy: PID 727 died... 06:10:50.567638 run iperf3-srv_10.42.42.10(pid=727): Terminated {rc=256} 06:10:50.577237 --- ParallelTerminationStrategy: PID 728 died... 06:10:50.630634 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=728): Terminated: ok {rc=0} 06:10:50.640284 --- ParallelTerminationStrategy: PID 729 died... 06:10:50.693174 run iperf3-srv_10.42.42.10(pid=729): Terminated {rc=256} 06:10:50.702848 --- ParallelTerminationStrategy: PID 732 died... 06:10:50.756217 run pcap-recorder_any(filters='host 10.42.42.2')(pid=732): Terminated: ok {rc=0} 06:10:50.765993 --- ParallelTerminationStrategy: PID 735 died... 06:10:50.819238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=735): Terminated: ok {rc=0} 06:10:50.829193 --- ParallelTerminationStrategy: PID 738 died... 06:10:50.882492 run pcap-recorder_any(filters='host 10.42.42.6')(pid=738): Terminated: ok {rc=0} 06:10:50.965944 bus /gobi_0: Setting Powered False 06:10:52.073719 bus /gobi_0: Setting Powered False 06:10:53.181167 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=736): Process ended prematurely: osmo-stp_10.42.42.5(pid=736) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=736)]