Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31733): Process ended prematurely: osmo-stp_10.42.42.5(pid=31733) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31733)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-b200+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 05:54:26.623702 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:26.636118 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:54:26.795947 tst ping_idle_ping.py: using LAC 19386 05:54:26.915962 tst ping_idle_ping.py: using RAC 6 05:54:27.035733 tst ping_idle_ping.py: using CellId 19386 05:54:27.160546 tst ping_idle_ping.py: using BVCI 19387 05:54:27.183780 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.194871 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.205754 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.217084 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.227880 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.238921 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.250101 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:54:27.260911 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:54:27.556279 tst ping_idle_ping.py:24: start network... 05:54:27.692850 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:54:28.215148 run create_hlr_db(pid=31727): Launched 05:54:28.404732 bus /gobi_6: Setting Powered False 05:54:29.424389 run create_hlr_db(pid=31727): Terminated: ok {rc=0} 05:54:29.833681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31729): Launched 05:54:30.139071 run osmo-hlr_10.42.42.2(pid=31730): Launched 05:54:30.251549 run osmo-stp_10.42.42.5: Starting osmo-stp 05:54:30.779313 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31732): Launched 05:54:31.149786 run osmo-stp_10.42.42.5(pid=31733): Launched 05:54:31.357421 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:54:32.041854 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31735): Launched 05:54:32.160033 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:54:32.448052 run patchelf(pid=31736): Launched 05:54:32.639756 run osmo-stp_10.42.42.5(pid=31733): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31733)] 05:54:32.779973 run osmo-stp_10.42.42.5(pid=31733): stdout: | (launched: 2022-12-09_05:54:30.961753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:32.919769 run osmo-stp_10.42.42.5(pid=31733): stderr: | �[0;m�[38;5;43m20221209055431308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055431317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055431317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055431318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:33.054848 run osmo-stp_10.42.42.5(pid=31733): stdout: | (launched: 2022-12-09_05:54:30.961753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:33.188670 run osmo-stp_10.42.42.5(pid=31733): stderr: | �[0;m�[38;5;43m20221209055431308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055431317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055431317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055431318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055431318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:33.344427 run patchelf(pid=31736): Terminating (SIGINT) 05:54:33.526972 run patchelf(pid=31736): Terminated: ok {rc=0} 05:54:33.560095 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31733): Process ended prematurely: osmo-stp_10.42.42.5(pid=31733) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31733)] [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 05:54:33.569745 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 05:54:33.633556 run osmo-hlr_10.42.42.2(pid=31730): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31730)] 05:54:33.685705 run osmo-hlr_10.42.42.2(pid=31730): stdout: | (launched: 2022-12-09_05:54:29.988878) 05:54:33.738283 run osmo-hlr_10.42.42.2(pid=31730): stderr: | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209055430163 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209055430174 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-b200+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209055430183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209055430183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209055430183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:54:33.783545 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31729): Terminating (SIGTERM) 05:54:33.826369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31732): Terminating (SIGTERM) 05:54:33.869041 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31735): Terminating (SIGTERM) 05:54:33.878930 --- ParallelTerminationStrategy: PID 31729 died... 05:54:33.936081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31729): Terminated: ok {rc=0} 05:54:33.946523 --- ParallelTerminationStrategy: PID 31732 died... 05:54:34.002748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31732): Terminated: ok {rc=0} 05:54:34.013087 --- ParallelTerminationStrategy: PID 31735 died... 05:54:34.069306 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31735): Terminated: ok {rc=0} 05:54:34.155701 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31733): Process ended prematurely: osmo-stp_10.42.42.5(pid=31733) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31733)]