Failed
dynts:sysmo+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_sysmo+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5217): Process ended prematurely: osmo-stp_10.42.42.5(pid=5217) [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5217)]
Standard Output
---------------------------------------------- trial-2356 dynts:sysmo+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 07:05:22.026357 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.037420 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 07:05:22.182227 tst switch_tch_pdch.py: using LAC 19761 07:05:22.300244 tst switch_tch_pdch.py: using RAC 126 07:05:22.420011 tst switch_tch_pdch.py: using CellId 19761 07:05:22.539885 tst switch_tch_pdch.py: using BVCI 19762 07:05:22.563221 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.574410 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.585293 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.596302 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.607044 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.618284 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.629287 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:05:22.640567 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:05:22.759805 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:05:23.061716 tst switch_tch_pdch.py:51: start network... 07:05:23.199355 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:05:23.699867 run create_hlr_db(pid=5211): Launched 07:05:23.833235 bus /gobi_6: Setting Powered False 07:05:24.911636 run create_hlr_db(pid=5211): Terminated: ok {rc=0} 07:05:25.299116 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5213): Launched 07:05:25.609735 run osmo-hlr_10.42.42.2(pid=5214): Launched 07:05:25.724406 run osmo-stp_10.42.42.5: Starting osmo-stp 07:05:26.232212 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5216): Launched 07:05:26.539953 run osmo-stp_10.42.42.5(pid=5217): Launched 07:05:26.651222 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:05:27.158963 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5219): Launched 07:05:27.267635 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:05:27.536678 run patchelf(pid=5220): Launched 07:05:27.715784 run osmo-stp_10.42.42.5(pid=5217): ERR: Terminated: ERROR {rc=1} [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5217)] 07:05:27.846420 run osmo-stp_10.42.42.5(pid=5217): stdout: | (launched: 2022-12-09_07:05:26.386901) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:05:27.976494 run osmo-stp_10.42.42.5(pid=5217): stderr: | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070526562 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070526562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070526562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070526563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:05:28.102773 run osmo-stp_10.42.42.5(pid=5217): stdout: | (launched: 2022-12-09_07:05:26.386901) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:05:28.228268 run osmo-stp_10.42.42.5(pid=5217): stderr: | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070526561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070526562 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070526562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070526562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070526563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:05:28.373693 run patchelf(pid=5220): Terminating (SIGINT) 07:05:28.543633 run patchelf(pid=5220): Terminated: ok {rc=0} 07:05:28.574580 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=5217): Process ended prematurely: osmo-stp_10.42.42.5(pid=5217) [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5217)] [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 07:05:28.583388 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 07:05:28.644779 run osmo-hlr_10.42.42.2(pid=5214): ERR: Terminated: ERROR {rc=237} [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5214)] 07:05:28.694770 run osmo-hlr_10.42.42.2(pid=5214): stdout: | (launched: 2022-12-09_07:05:25.454910) 07:05:28.744739 run osmo-hlr_10.42.42.2(pid=5214): stderr: | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209070525635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209070525646 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/dynts:sysmo+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209070525655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209070525655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209070525655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:05:28.787450 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5213): Terminating (SIGTERM) 07:05:28.827551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5216): Terminating (SIGTERM) 07:05:28.867616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5219): Terminating (SIGTERM) 07:05:28.877605 --- ParallelTerminationStrategy: PID 5213 died... 07:05:28.931468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5213): Terminated: ok {rc=0} 07:05:28.941360 --- ParallelTerminationStrategy: PID 5216 died... 07:05:28.995225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5216): Terminated: ok {rc=0} 07:05:29.005283 --- ParallelTerminationStrategy: PID 5219 died... 07:05:29.059142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5219): Terminated: ok {rc=0} 07:05:29.148867 bus /gobi_0: Setting Powered False 07:05:30.253680 bus /gobi_0: Setting Powered False 07:05:31.388112 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5217): Process ended prematurely: osmo-stp_10.42.42.5(pid=5217) [trial-2356↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5217)]