Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)]
Standard Output
---------------------------------------------- trial-2359 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 12:21:48.600590 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:48.611361 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 12:21:48.744442 tst cs_paging_gprs_active.py: using LAC 21429 12:21:48.866189 tst cs_paging_gprs_active.py: using RAC 9 12:21:48.990795 tst cs_paging_gprs_active.py: using CellId 21429 12:21:49.113885 tst cs_paging_gprs_active.py: using BVCI 21430 12:21:49.137748 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.148430 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.158919 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.169428 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.179895 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.190374 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.201038 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.211376 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:21:49.222002 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:21:49.343878 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:21:49.628421 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:21:49.756920 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:21:50.077617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4697): Launched 12:21:50.347584 run iperf3-srv_10.42.42.10(pid=4698): Launched 12:21:50.536217 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:21:50.664351 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:21:50.984781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4699): Launched 12:21:51.252640 run iperf3-srv_10.42.42.10(pid=4700): Launched 12:21:51.440545 tst cs_paging_gprs_active.py:38: start network... 12:21:51.569158 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:21:52.065439 run create_hlr_db(pid=4701): Launched 12:21:52.243176 bus /sierra_2: Setting Powered False 12:21:53.265197 run create_hlr_db(pid=4701): Terminated: ok {rc=0} 12:21:53.705340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Launched 12:21:54.037383 run osmo-hlr_10.42.42.2(pid=4704): Launched 12:21:54.159874 run osmo-stp_10.42.42.5: Starting osmo-stp 12:21:54.738714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Launched 12:21:55.072049 run osmo-stp_10.42.42.5(pid=4707): Launched 12:21:55.191937 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:21:55.771649 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Launched 12:21:55.889854 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:21:56.181648 run patchelf(pid=4710): Launched 12:21:56.375983 run osmo-stp_10.42.42.5(pid=4707): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)] 12:21:56.517032 run osmo-stp_10.42.42.5(pid=4707): stdout: | (launched: 2022-12-09_12:21:54.907200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:56.658644 run osmo-stp_10.42.42.5(pid=4707): stderr: | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122155096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:56.795847 run osmo-stp_10.42.42.5(pid=4707): stdout: | (launched: 2022-12-09_12:21:54.907200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:56.931901 run osmo-stp_10.42.42.5(pid=4707): stderr: | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122155096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122155096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122155097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:57.091267 run patchelf(pid=4710): Terminating (SIGINT) 12:21:57.278604 run patchelf(pid=4710): Terminated: ok {rc=0} 12:21:57.313131 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)] [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 12:21:57.323235 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:21:57.387483 run osmo-hlr_10.42.42.2(pid=4704): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4704)] 12:21:57.439702 run osmo-hlr_10.42.42.2(pid=4704): stdout: | (launched: 2022-12-09_12:21:53.873527) 12:21:57.492489 run osmo-hlr_10.42.42.2(pid=4704): stderr: | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209122154068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209122154080 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209122154088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209122154089 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209122154089 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:21:57.537278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4697): Terminating (SIGTERM) 12:21:57.579610 run iperf3-srv_10.42.42.10(pid=4698): Terminating (SIGTERM) 12:21:57.621987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4699): Terminating (SIGTERM) 12:21:57.664189 run iperf3-srv_10.42.42.10(pid=4700): Terminating (SIGTERM) 12:21:57.706849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Terminating (SIGTERM) 12:21:57.748848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Terminating (SIGTERM) 12:21:57.791243 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Terminating (SIGTERM) 12:21:57.801417 --- ParallelTerminationStrategy: PID 4697 died... 12:21:57.858441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4697): Terminated: ok {rc=0} 12:21:57.868604 --- ParallelTerminationStrategy: PID 4698 died... 12:21:57.924830 run iperf3-srv_10.42.42.10(pid=4698): Terminated {rc=256} 12:21:57.935181 --- ParallelTerminationStrategy: PID 4699 died... 12:21:57.991615 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4699): Terminated: ok {rc=0} 12:21:58.001794 --- ParallelTerminationStrategy: PID 4700 died... 12:21:58.057993 run iperf3-srv_10.42.42.10(pid=4700): Terminated {rc=256} 12:21:58.068040 --- ParallelTerminationStrategy: PID 4703 died... 12:21:58.123787 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Terminated: ok {rc=0} 12:21:58.134098 --- ParallelTerminationStrategy: PID 4706 died... 12:21:58.190102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Terminated: ok {rc=0} 12:21:58.200166 --- ParallelTerminationStrategy: PID 4709 died... 12:21:58.256245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Terminated: ok {rc=0} 12:21:58.343761 bus /gobi_0: Setting Powered False 12:21:59.450905 bus /gobi_0: Setting Powered False 12:22:00.558626 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2359↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)]